Click for more products.
No products were found.

5 micron FILTER CARTRIDGE

A 5 micron filter cartridge is a replaceable component within a filtration system designed to remove solid particles and sediment from a fluid (either liquid or gas) that are equal to or greater than 5 µm in size.

Applications: Water filtration, compressed air filtration or industrial processes.

Technical specifications:

  • 5 micron filter element.
  • It is supplied with a centrifuge cone and separator.
  • Easy assembly.
  • Possibility of changing to another micron size. 0.5 microns or 0.1 microns.
  • Available for 1/4" - 3/8" - 1/2" - 3/4" - 1" filters
Read moreShow less
€4.99 (tax incl.)
€4.12 (tax excl.)
SELECT THE THREAD
  • 1/4"
  • 3/8"
  • 1/2"
  • 3/4"
  • 1"
Reference:
32160008
Description

5 micron filter cartridge

The filter cartridge is designed to retain solid particles down to 5 microns. It is used in liquid filtration systems. It provides fine filtration to improve fluid quality and protect downstream equipment.

Functions

  1. Removal of fine sediments (sand, oxides, suspended particles)
  2. Protection of downstream finer filtration systems
  3. Improvement of water turbidity

Applications

  • Drinking and industrial water treatment
  • Pre-filtration in reverse osmosis systems
  • Food and beverage industry
  • Chemical industry
  • Protection of pumps, valves and sensitive equipment
  • Irrigation and agriculture systems
Read moreShow less
Product Details
32160008
Comments (0)
6 other products in the same category:
€12.00 (tax excl.)
€14.52 (tax incl.)
A compressed air filter purifies compressed air before use, protecting facilities and improving the efficiency and reliability of the pneumatic system. Main features: High level of condensate separation. Reduced...
€24.82 (tax excl.)
€30.03 (tax incl.)
An automatic filter purge replacement automatically removes condensation from the compressed air in the filters. This helps keep the filter functioning properly and prevents problems such as corrosion, airflow...
€17.46 (tax excl.)
€21.13 (tax incl.)
A 1/8" 20 micron mini filter is used to purify compressed air of small solid particles and contaminants, thereby protecting downstream system components. Applications: Individual points of use, Control circuits,...
€106.00 (tax excl.)
€128.26 (tax incl.)
A desulfurizing silencer with a microfilter serves to reduce the noise generated by the exhaust of pressurized air and, in turn, eliminate oil mist and other impurities present in the air. Applications: Pneumatic...
€25.09 (tax excl.)
€30.36 (tax incl.)
A 0.1 micron filter cartridge is a replaceable component within a filtration system designed to remove extremely fine particles from a fluid (liquid or gas) that are equal to or greater than 0.1 µm Applications: Water...
€35.00 (tax excl.)
€42.35 (tax incl.)
The 1/2" end-of-line drain allows for the removal of condensate from the pipes without manual intervention. When pressure is lost, the drain remains open, ensuring the removal of any accumulated liquid particles. For...
Recently Viewed
€4.99 (tax incl.)
€4.12 (tax excl.)
A 5 micron filter cartridge is a replaceable component within a filtration system designed to remove solid particles and sediment from a fluid (either liquid or gas) that are equal to or greater than 5 µm in size....
€0.28 (tax excl.)
€0.34 (tax incl.)
A DIN 2353 L lock nut is a fundamental component in compression fittings with a shear ring that comply with the DIN 2353 standard. Its function is to hold and compress the shear ring against the rigid tube and the...
€3.99 (tax excl.)
€4.83 (tax incl.)
A 90º MH press inox bend is a pipe fitting, especially for installations where high corrosion resistance and a tight seal are required. Its function is to change the direction of fluid flow at a 90º angle....
€10.14 (tax excl.)
€12.27 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€3.03 (tax excl.)
€3.67 (tax incl.)
Male plug conical thread Its function is to safely and hermetically join two components, usually tubes or fittings. The tapered thread ensures a tight seal when tightened, as the threading progresses, the pressure...

Menu

Settings