Click for more products.
No products were found.

0.1 micron FILTER CARTRIDGE

A 0.1 micron filter cartridge is a replaceable component within a filtration system designed to remove extremely fine particles from a fluid (liquid or gas) that are equal to or greater than 0.1 µm

Applications: Water filtration, Compressed air filtration, Industrial processes and Medical equipment.

Technical specifications:

  • Filter element for 0.1 micron filter.
  • Easy assembly.
  • Possibility of changing to another micron size. 0.5 microns or 20 microns.
Read moreShow less
€30.36 (tax incl.)
€25.09 (tax excl.)
SELECT THE THREAD
  • 1/4"
  • 3/8"
  • 1/2"
  • 3/4"
Reference:
32190009
Description

0.1 micron filter cartridge

A 0.1 micron filter cartridge is a filtration element designed to retain solid particles, microorganisms, and extremely fine contaminants present in liquids or gases, allowing only the filtered fluid to pass through.

The filtration capacity of 0.1 µm (microns) indicates that the cartridge can capture particles of equal or greater size than 0.1 micrometers, providing a high level of purity and safety in industrial, food, pharmaceutical and laboratory applications.

Advantages

  • High degree of purity
  • Protection of sensitive equipment
  • Improvement of the quality of the final product
  • Reduction of microbiological contamination

Applications

  • Compressed air filtration
  • Pharmaceutical industry
  • Food and beverage processing
  • Water treatment
  • Laboratories and chemical processes
  • Sterile filtration
Read moreShow less
Product Details
32190009
Comments (0)
6 other products in the same category:
€4.12 (tax excl.)
€4.99 (tax incl.)
A 5 micron filter cartridge is a replaceable component within a filtration system designed to remove solid particles and sediment from a fluid (either liquid or gas) that are equal to or greater than 5 µm in size....
€17.46 (tax excl.)
€21.13 (tax incl.)
A 1/8" 20 micron mini filter is used to purify compressed air of small solid particles and contaminants, thereby protecting downstream system components. Applications: Individual points of use, Control circuits,...
€24.82 (tax excl.)
€30.03 (tax incl.)
An automatic filter purge replacement automatically removes condensation from the compressed air in the filters. This helps keep the filter functioning properly and prevents problems such as corrosion, airflow...
€12.00 (tax excl.)
€14.52 (tax incl.)
A compressed air filter purifies compressed air before use, protecting facilities and improving the efficiency and reliability of the pneumatic system. Main features: High level of condensate separation. Reduced...
€35.00 (tax excl.)
€42.35 (tax incl.)
The 1/2" end-of-line drain allows for the removal of condensate from the pipes without manual intervention. When pressure is lost, the drain remains open, ensuring the removal of any accumulated liquid particles. For...
€106.00 (tax excl.)
€128.26 (tax incl.)
A desulfurizing silencer with a microfilter serves to reduce the noise generated by the exhaust of pressurized air and, in turn, eliminate oil mist and other impurities present in the air. Applications: Pneumatic...
Recently Viewed
€30.36 (tax incl.)
€25.09 (tax excl.)
A 0.1 micron filter cartridge is a replaceable component within a filtration system designed to remove extremely fine particles from a fluid (liquid or gas) that are equal to or greater than 0.1 µm Applications: Water...
€84.24 (tax excl.)
€101.93 (tax incl.)
The 16 M1 flat grease fitting is a specific type of grease fitting used in industrial machinery to facilitate the lubrication of hard-to-reach points. It allows for the injection of grease under pressure to lubricate...
€0.28 (tax excl.)
€0.34 (tax incl.)
A DIN 2353 L lock nut is a fundamental component in compression fittings with a shear ring that comply with the DIN 2353 standard. Its function is to hold and compress the shear ring against the rigid tube and the...
€3.99 (tax excl.)
€4.83 (tax incl.)
A 90º MH press inox bend is a pipe fitting, especially for installations where high corrosion resistance and a tight seal are required. Its function is to change the direction of fluid flow at a 90º angle....
€10.14 (tax excl.)
€12.27 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
€3.03 (tax excl.)
€3.67 (tax incl.)
Male plug conical thread Its function is to safely and hermetically join two components, usually tubes or fittings. The tapered thread ensures a tight seal when tightened, as the threading progresses, the pressure...

Menu

Settings