Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
SOLENOID VALVE NG-10 4/3 CENTER H
SOLENOID VALVE NG-10 4/3 CENTER H
SOLENOID VALVE NG-10 4/3 CENTER H
SOLENOID VALVE NG-10 4/3 CENTER H
SOLENOID VALVE NG-10 4/3 CENTER H
SOLENOID VALVE NG-10 4/3 CENTER H

SOLENOID VALVE NG-10 4/3 CENTER H

The NG-10 4/3 center H solenoid valve is used for precise fluid control in medium and high power hydraulic systems.

Applications: Heavy industrial machinery (presses, molding machinery), Construction and mining equipment, High power hydraulic systems, Agricultural machinery.

Technical data sheet:

  • Maximum pressure 315 bar.
  • Flow rate 160 l/min.
  • Available voltages 12Vdc - 24Vdc - 24Vac - 220V ac - 110Vac SUPPLIED WITH COILS
  • Supplied with connector and 4 screws.
€165.76 (tax included)
€136.99 (tax excl.)
VOLTAGE/VOLUME
  • 12V DC
  • 24V DC
  • 24VAC
  • 110V AC
  • 220VAC
Reference:
470500011
Description

NG-10 4/3 center H solenoid valve

ELECTROVALVULA NG-10 43 CENTRO H H-30ELECTROVALVULA NG-10 43 CENTRO H H-30

Product Details
470500011
Comments
Related products
NG-10 SOLENOID VALVE COIL NG-10 SOLENOID VALVE COIL

€34.97 (tax excl.)
€42.31 (tax included)
The NG-10 solenoid valve coil is used to operate the spool of a NG-10 hydraulic solenoid valve. Common Applications: Heavy Industrial Machinery, Construction and Mining Equipment, High Power Hydraulic Systems,...
NG-10 SIDE BASE PLATE NG-10 SIDE BASE PLATE

€75.03 (tax excl.)
€90.79 (tax included)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
NG-10 LOWER BASE PLATE NG-10 LOWER BASE PLATE

€82.00 (tax excl.)
€99.22 (tax included)
A lower NG-10 base plate serves as a mounting and connection point for solenoid valves and other hydraulic components that comply with the NG-10 (CETOP 5) standard. Connection ports for hydraulic lines are located on...
NG-10 MODULAR NON-RETURN VALVE NG-10 MODULAR NON-RETURN VALVE

€80.00 (tax excl.)
€96.80 (tax included)
A modular NG-10 check valve is a hydraulic component designed to ensure fluid flow moves in one direction only, automatically blocking any attempt to return in the opposite direction. Applications: Cylinder clamping...
11 other products in the same category:
NG-10 LOWER BASE PLATE

€82.00 (tax excl.)
€99.22 (tax included)
A lower NG-10 base plate serves as a mounting and connection point for solenoid valves and other hydraulic components that comply with the NG-10 (CETOP 5) standard. Connection ports for hydraulic lines are located on...
NG-10 SOLENOID VALVE COIL

€34.97 (tax excl.)
€42.31 (tax included)
The NG-10 solenoid valve coil is used to operate the spool of a NG-10 hydraulic solenoid valve. Common Applications: Heavy Industrial Machinery, Construction and Mining Equipment, High Power Hydraulic Systems,...
SOLENOID VALVE NG-10 4/3 CENTER A-B-T

€136.99 (tax excl.)
€165.76 (tax included)
The NG-10 4/3 ABT Center Solenoid Valve is a hydraulic component that controls fluids in medium and high power hydraulic systems. The valve has 4 ways (ports) and 3 internal spool positions. Applications: Heavy...
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
SOLENOID VALVE NG-10 CROSS H

€104.55 (tax excl.)
€126.51 (tax included)
A NG-10 H-cross solenoid valve is a hydraulic directional control component. This configuration allows the movement of hydraulic actuators (cylinders, motors) to be controlled precisely. Common Applications: Heavy...
NG-10 SIDE BASE PLATE

€75.03 (tax excl.)
€90.79 (tax included)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
SOLENOID VALVE NG-10 4/3 CENTER P-T

€145.64 (tax excl.)
€176.22 (tax included)
The NG-10 4/3 PT center solenoid valve is used for precise fluid control in medium and high power hydraulic systems. Common Applications: Heavy industrial machinery (presses, molding machinery), Construction and...
NG-10 CLOSED CROSS SOLENOID VALVE

€104.55 (tax excl.)
€126.51 (tax included)
A closed NG-10 crossover solenoid valve is an electrically actuated hydraulic directional control valve. It is used to control the direction and direction of oil flow in a circuit. Common applications: industrial...
NG-10 PARALLEL CROSS SOLENOID VALVE

€104.55 (tax excl.)
€126.51 (tax included)
A NG-10 parallel cross solenoid valve is a hydraulic directional control valve that controls oil flow in medium and high power hydraulic systems. Common Applications: Heavy industrial machinery (presses, molding...
NG-10 BLINDING PLATE

€49.01 (tax excl.)
€59.30 (tax included)
An NG-10 blanking plate is a component used to close or seal an NG-10 (CETOP 5) port or connection in a hydraulic system. It prevents hydraulic fluid leaks and protects the port from contamination. Common...
SOLENOID VALVE NG-10 4/3 CLOSED CENTER

€136.99 (tax excl.)
€165.76 (tax included)
A NG-10 4/3 closed center solenoid valve is used for precise fluid control in medium and high power hydraulic systems. Common Applications: Heavy industrial machinery (presses, molding machinery), Construction and...
Recently Viewed
SOLENOID VALVE NG-10 4/3 CENTER H

€165.76 (tax included)
€136.99 (tax excl.)
The NG-10 4/3 center H solenoid valve is used for precise fluid control in medium and high power hydraulic systems. Applications: Heavy industrial machinery (presses, molding machinery), Construction and mining...
SOLENOID VALVE NG-10 4/3 CLOSED CENTER

€136.99 (tax excl.)
€165.76 (tax included)
A NG-10 4/3 closed center solenoid valve is used for precise fluid control in medium and high power hydraulic systems. Common Applications: Heavy industrial machinery (presses, molding machinery), Construction and...
5/8" STEEL SPROCKET

€7.39 (tax excl.)
€8.94 (tax included)
5/8" steel toothed pinion The standard gear is a small mechanism used to transmit power from one component to another within a machine. There can be either direct gear transmission or indirect transmission via a...
STORZ LINK FEMALE THREAD

€6.20 (tax excl.)
€7.50 (tax included)
The Storz female threaded coupling, in addition to its bayonet mechanism for quick coupling, has a female thread on one end. This type of coupling allows flexible hoses to be connected to fixed piping systems, such as...
NG-10 CLOSED CROSS SOLENOID VALVE

€104.55 (tax excl.)
€126.51 (tax included)
A closed NG-10 crossover solenoid valve is an electrically actuated hydraulic directional control valve. It is used to control the direction and direction of oil flow in a circuit. Common applications: industrial...
5/2 1/4 Locking Cam Valve MVMB-220-4TB

€27.00 (tax excl.)
€32.67 (tax included)
The MVMB-220-4TB 5/2 1/4 cam-operated locking valve is a 5-way, 2-position (5/2) mechanical pneumatic valve designed for the manual control of pneumatic cylinders and actuators. It features cam or rotary locking...

Menu

Please sign in first.

Sign in