Click for more products.
No products were found.

COMPRESSION FITTING BLOW SOLENOID VALVE

  • Valves designed for bag filter blowing installations, WITH COMPRESSION FITTING
  • Speed and high flow.
  • Membrane closure.
  • Working pressure 0.5 - 8 bar.
  • Temperature -40 / 80ºC.
  • Aluminum body.
  • Voltages to choose from 24DC-24AC-230AC-110AC
  • Possibility of mounting a Viton membrane.
  • It is supplied without coil and without connector.
  • ATEX II 2 GD (zone 1 - 21)
  • ATEX II 3 GD (zone 2 - 22)
Read moreShow less
€68.97 (tax incl.)
€57.00 (tax excl.)
SIZE
  • 3/4"
  • 1"
  • 1-1/2"
Reference:
60380026
Description

SOLENOID VALVE FOR BLOWOUT AND COMPRESSION FITTING

Solenoid valve for bag filters

A bag filter blower solenoid valve is an electrically operated valve that controls the rapid discharge of compressed air into the blow tubes or venturis, generating a high-pressure air pulse that cleans the filter bags, dislodging the dust accumulated on their surface.

Its function is to produce short, intense pulses of air, dislodge particulate matter adhering to the bags, maintain filtration efficiency, and prevent excessive pressure loss.

Applications

  • Industrial bag filters
  • Emission control systems
  • Cement plants, mining plants, steel plants, food processing plants, etc.

Read moreShow less
Product Details
60380026
Comments (0)
You may also like
€1.00 (tax excl.)
€1.21 (tax incl.)
A DIN-43650-A T-30 coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and a coil of an electromechanical device. The T-30...
€12.00 (tax excl.)
€14.52 (tax incl.)
A Ø10 solenoid valve coil is used to operate a solenoid valve in industrial cleaning systems, mainly in dust collectors with bag filters or cartridges. It generates a magnetic field when energized that opens or closes...
8 other products in the same category:
€35.00 (tax excl.)
€42.35 (tax incl.)
A blow-through fitting allows blow-through valves to be connected to the injector tubes through the filter wall in a watertight manner, eliminating the need for welding. Applications: cleaning of bag and cartridge...
€40.25 (tax excl.)
€48.70 (tax incl.)
A bag filter blow solenoid valve is an electromechanical device used in compressed air cleaning systems for bag filters. Applications: Industrial bag filters, Emission control systems, Cement plants, mining, steel,...
€37.84 (tax excl.)
€45.79 (tax incl.)
The T-30 analog timer is an electromechanical device used to switch an electrical circuit on or off after a preset time. Similar to the T-22 DIN 43650-B but with some differences, it is used to control processes that...
€12.00 (tax excl.)
€14.52 (tax incl.)
A Ø10 solenoid valve coil is used to operate a solenoid valve in industrial cleaning systems, mainly in dust collectors with bag filters or cartridges. It generates a magnetic field when energized that opens or closes...
€20.70 (tax excl.)
€25.05 (tax incl.)
The replacement membrane for a Viton blow-off valve is the internal flexible component that allows the airflow to be opened and closed in a blow-off valve. Applications: Dust collectors, cement plants, foundries,...
€37.84 (tax excl.)
€45.79 (tax incl.)
The T-22 DIN 43650-B analog timer is a programmable device for use with elements that have a DIN 43650 B type connection. It is applied with solenoid valves for draining compressor tanks such as air transport lines,...
€1.00 (tax excl.)
€1.21 (tax incl.)
A DIN-43650-A T-30 coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and a coil of an electromechanical device. The T-30...
€22.00 (tax excl.)
€26.62 (tax incl.)
The NBR blow-off valve membrane replacement is designed to ensure a tight seal and optimal valve functionality, allowing for efficient filter blow-off and expulsion of accumulated particles. Applications: Pneumatic...
Recently Viewed
€68.97 (tax incl.)
€57.00 (tax excl.)
Valves designed for bag filter blowing installations, WITH COMPRESSION FITTING Speed and high flow. Membrane closure. Working pressure 0.5 - 8 bar. Temperature -40 / 80ºC. Aluminum body. Voltages to choose from...
€10.25 (tax excl.)
€12.40 (tax incl.)
A flat flange is a connecting component used in automation systems and industrial machinery, specifically in the attachment of pneumatic and hydraulic cylinders. Applications: Industrial automation, Robotics,...
€21.99 (tax excl.)
€26.61 (tax incl.)
A 1/4" pneumatic pilot valve is a pneumatic directional control valve that regulates the flow of compressed air in a system. It is actuated by an air pressure signal. Applications: Industrial automation, Hazardous or...
€485.00 (tax excl.)
€586.85 (tax incl.)
LUBRICUS LUB-V OIL automatic oiler 70 bar 24 VDC It can be filled with oil directly. Electromechanical system. External 24VDC power supply. M-12x1 connector. For oil only up to NLGI-KI-2 400 cm³ lubricant cartridge...
€6.24 (tax excl.)
€7.55 (tax incl.)
A threaded PVC ball valve is used to control the flow of fluids in pipes. It is easily installed on pipes with compatible threads. Common applications: Plumbing systems, Irrigation systems, Swimming pools and spas,...
€1.52 (tax excl.)
€1.84 (tax incl.)
Neoprene cord Neoprene cord (CR) has a combination of properties that makes it a multifunctional rubber. It is used to make insulating gaskets and coatings for protection in environments that come into contact with...

Menu

Settings