Click for more products.
No produts were found.
Click for more products.
No produts were found.

SOLENOID VALVE 2/2 N. CLOSED ASSISTED CONTROL AL03

2/2 NC solenoid valve with assisted control.

  • It needs a differential pressure for proper operation.
  • Horizontal preferred mounting position
  • It is possible to change the coil without having to dismantle the valve.
  • Various sealing gaskets depending on the fluid
  • Possibility of supply in stainless. Closing regulator from 1-1/4”.
  • Applications: Compressed air, inert gases, diesel, steam and in general all fluids compatible with the available sealing gaskets.
  • Maximum admitted viscosity: 5º Engler.
  • Coil type C1 (up to 1") 1-1/4" up to 2" coil C3
  • Supplied without coil.
€38.89 (tax included)
€32.14 (tax excl.)
SELECT THE THREAD
  • 3/8"
  • 1/2"
  • 3/4"
  • 1"
  • 1-1/4"
  • 1-1/2"
  • 2"
Reference:
60000012
Description

ELEC.VALVULA 22 N.CERRADA MANDO ASISTIDO AL03

Product Details
60000012
Comments
Related products
€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
€4.14 (tax excl.)
€5.01 (tax included)
A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...
€8.80 (tax excl.)
€10.65 (tax included)
A C3 8W solenoid coil is the essential electromagnetic component that activates a solenoid valve mechanism, allowing or stopping the flow of fluid (liquid or gas) in a system. 8W indicates the power consumption....
6 other products in the same category:
€37.84 (tax excl.)
€45.79 (tax included)
The T-22 DIN 43650-B analog timer is a programmable device for joint use with elements that have a DIN 43650 B type connection. It is applied with solenoid valves for draining compressor boilers such as air transport...
€84.10 (tax excl.)
€101.76 (tax included)
A 2/2 high-pressure AL08 solenoid valve is used in industrial systems to precisely and automatically control the flow of fluids (liquids or gases). It is designed to operate in systems requiring high pressures, such...
€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
€4.14 (tax excl.)
€5.01 (tax included)
A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...
€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
Recently Viewed
€38.89 (tax included)
€32.14 (tax excl.)
2/2 NC solenoid valve with assisted control. It needs a differential pressure for proper operation. Horizontal preferred mounting position It is possible to change the coil without having to dismantle the valve....
€1.67 (tax excl.)
€2.02 (tax included)
A metric T-shaped pipe union quickly and securely joins three pipes of the same diameter using an instant connection system. It is made of high-quality, food-safe materials, meeting strict health regulations, and...
€6.82 (tax excl.)
€8.25 (tax included)
Straight pipe fitting for compressed air networks A straight tube fitting for compressed air networks is a pneumatic connector used to join two tubes in alignment, allowing the continuity of airflow without changes in...
€28.00 (tax excl.)
€33.88 (tax included)
Unidirectional flow regulator. Available in 1/8" - 1/4" threads Working temperature -10ºC / 60 ºC Pressure 2 - 10 bar The panel mounting with the special nut, the knob knob, when turned, does not move relative to the...
€58.00 (tax excl.)
€70.18 (tax included)
Polyamide PA-12 tube They are used in pneumatic and hydraulic systems. Technical sheet: High mechanical resistance. Temperature: -40ºC to +100ºC. High resistance to chemical agents. Electrical and thermal insulator....

Menu