Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
PNEUMATIC FILTER BLOWOUT VALVE
PNEUMATIC FILTER BLOWOUT VALVE
PNEUMATIC FILTER BLOWOUT VALVE
PNEUMATIC FILTER BLOWOUT VALVE

PNEUMATIC FILTER BLOWOUT VALVE

The pneumatic filter blow valve is designed for the automatic cleaning of filters by means of compressed air pulses.

Applications: industrial filtration systems (such as dust collectors or bag filters)

Main features:

  • Valves designed for bag filter blowing installations.
  • Speed and high flow rate.
  • Membrane closure.
  • Working pressure 0.5 - 8 bar.
  • Temperature -40 / 80ºC.
  • Aluminum body.
  • Possibility of mounting a Viton membrane.
  • ATEX II 2 GD (zone 1 - 21)
  • ATEX II 3 GD (zone 2 - 22)
€38.02 (tax included)
€31.42 (tax excl.)
SELECT THE THREAD
  • 3/4"
  • 1"
  • 1-1/2"
  • 2"
  • 2-1/2"
Reference:
60330025
Description

Pneumatic filter blow valve

A pneumatic filter blow solenoid valve is an electrically operated valve that controls the rapid discharge of compressed air into the blow tubes or venturis, generating a high-pressure air pulse that cleans the filter bags, dislodging the dust accumulated on their surface.

Its function is to produce short, intense pulses of air, dislodge particulate matter adhering to the bags, maintain filtration efficiency, and prevent excessive pressure loss.

Applications

  • Industrial bag filters
  • Emission control systems
  • Cement plants, mining plants, steel plants, food processing plants, etc.

Technical specifications of a pneumatic filter blow valve:

VALVULA SOPLADO DE FILTROS NEUM.VALVULA SOPLADO DE FILTROS NEUM.

Product Details
60330025
Comments
Related products
NBR BLOW-IN VALVE DIAPHRAGM REPLACEMENT NBR BLOW-IN VALVE DIAPHRAGM REPLACEMENT

€22.00 (tax excl.)
€26.62 (tax included)
The NBR blow-off valve membrane replacement is designed to ensure a tight seal and optimal valve functionality, allowing for efficient filter blow-off and expulsion of accumulated particles. Applications: Pneumatic...
12 other products in the same category:
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
VITON BLOW-MOUNTED VALVE DIAPHRAGM REPLACEMENT

€20.70 (tax excl.)
€25.05 (tax included)
The replacement membrane for a Viton blow-off valve is the internal flexible component that allows the airflow to be opened and closed in a blow-off valve. Applications: Dust collectors, cement plants, foundries,...
ATEX BLOWING SOLENOID VALVE COIL

€20.00 (tax excl.)
€24.20 (tax included)
An ATEX blow-off solenoid valve coil . It is used to operate a blow-off solenoid valve in industrial cleaning systems, mainly in dust collectors with bag or cartridge filters in places or environments with a risk of...
SOLENOID VALVE FOR BLOW FILTERS

€40.25 (tax excl.)
€48.70 (tax included)
A bag filter blow solenoid valve is an electromechanical device used in compressed air cleaning systems for bag filters. Applications: Industrial bag filters, Emission control systems, Cement plants, mining, steel,...
ANALOG TIMER T-22 DIN 43650-B

€37.84 (tax excl.)
€45.79 (tax included)
The T-22 DIN 43650-B analog timer is a programmable device for joint use with elements that have a DIN 43650 B type connection. It is applied with solenoid valves for draining compressor boilers such as air transport...
FILTER BLOWOUT VALVE COMPRESSION FITTING

€39.21 (tax excl.)
€47.44 (tax included)
A compression fitting filter blow valve is designed for purging and cleaning filters in compressed air systems, fluids or industrial processes. Applications: Compressed air systems, Industrial filters and condensate...
ANALOG TIMER T-30

€37.84 (tax excl.)
€45.79 (tax included)
The T-30 analog timer is an electromechanical device used to activate or deactivate an electrical circuit after a preset time. Like the T-22 DIN 43650-B, but with some differences, it is used to control processes that...
T-30 COIL CONNECTOR DIN-43650-A

€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
COIL FOR BLOWING SOLENOID VALVE

€12.00 (tax excl.)
€14.52 (tax included)
A Ø10 solenoid valve coil is used to operate a solenoid valve in industrial cleaning systems, mainly in dust collectors with bag filters or cartridges. It generates a magnetic field when energized that opens or closes...
NBR BLOW-IN VALVE DIAPHRAGM REPLACEMENT

€22.00 (tax excl.)
€26.62 (tax included)
The NBR blow-off valve membrane replacement is designed to ensure a tight seal and optimal valve functionality, allowing for efficient filter blow-off and expulsion of accumulated particles. Applications: Pneumatic...
COMPRESSION FITTING BLOW SOLENOID VALVE

€57.00 (tax excl.)
€68.97 (tax included)
Valves designed for bag filter blowing installations, WITH COMPRESSION FITTING Speed and high flow. Membrane closure. Working pressure 0.5 - 8 bar. Temperature -40 / 80ºC. Aluminum body. Voltages to choose from...
BLOW-IN PULL-IN

€35.00 (tax excl.)
€42.35 (tax included)
A blow-through fitting allows blow-through valves to be connected to the injector tubes through the filter wall in a watertight manner, eliminating the need for welding. Applications: cleaning of bag and cartridge...
Recently Viewed
PNEUMATIC FILTER BLOWOUT VALVE

€38.02 (tax included)
€31.42 (tax excl.)
The pneumatic filter blow valve is designed for the automatic cleaning of filters by means of compressed air pulses. Applications: industrial filtration systems (such as dust collectors or bag filters) Main features:...
INSTANT PIPE ENLARGEMENT FITTING

€0.71 (tax excl.)
€0.86 (tax included)
An instant tube extension fitting is a type of quick connector used to join two tubes of different diameters quickly and easily. Technical specifications: Working pressure -0.99 / 10 bar. Temperature 0 /- 60ºC. Wide...
ENDLESS CLAMP W2

€0.38 (tax excl.)
€0.46 (tax included)
The W2 endless clamp is ideal for automotive and industrial applications. It is used to secure and seal hoses and pipes. Applications: Cooling and heating systems, Fuel and air systems in automobiles, Industrial and...
BLOW-IN PULL-IN

€35.00 (tax excl.)
€42.35 (tax included)
A blow-through fitting allows blow-through valves to be connected to the injector tubes through the filter wall in a watertight manner, eliminating the need for welding. Applications: cleaning of bag and cartridge...

Menu

Please sign in first.

Sign in