Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
3/2 N. CLOSED SOLENOID VALVE 1/8" AC01

3/2 N. CLOSED SOLENOID VALVE 1/8" AC01

The AC01 3/2 N. normally closed 1/8" solenoid valve is used to control the flow of compressed air in industrial automation systems. It offers a third position that allows a specific port to be connected or disconnected. It has three ports and two positions. In the normal position, one port is connected to the inlet, another to the outlet, and the third is blocked until an electrical signal is applied to open it.

Applications: Industrial automation, Packaging machinery, Robotics, Pneumatic control systems, Machine tools.

Technical specifications:

  • Direct acting solenoid valve 1/8".
  • Differential pressure is not required for its proper functioning.
  • Mounting position is irrelevant.
  • It is possible to change the coil without removing the valve.
  • Various sealing gaskets depending on the fluid used.
  • Applications: Compressed air, inert gases, diesel, steam, vacuum and in general all fluids compatible with the available sealing gaskets.
  • Maximum permissible viscosity: 5º Engler.
  • Supplied WITHOUT COIL
  • C1 type mounting coil
€25.29 (tax included)
€20.90 (tax excl.)
Reference:
6027
Description

3/2 N. closed solenoid valve 1/8" AC01

ELEC.VALVULA 32 N.CERRADA 18 AC01

Product Details
6027
Comments
Related products
T-22 COIL CONNECTOR DIN-43650-B T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
SOLENOID VALVE COIL C1 SOLENOID VALVE COIL C1

€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
12 other products in the same category:
3/2" SOLENOID VALVE CLOSED 1/4" STAINLESS STEEL DIRECT CONTROL

€64.00 (tax excl.)
€77.44 (tax included)
A 3/2 N. closed 1/4" stainless steel direct control solenoid valve is an electromagnetic valve designed to control the flow of a fluid (typically compressed air) in low flow pneumatic or hydraulic systems....
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
SOLENOID VALVE 2/2 NO. OPEN 1/4" AN02

€35.15 (tax excl.)
€42.53 (tax included)
A 2/2 N. open solenoid valve, 1/4" AN20, is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter conduit. The valve has two ports (inlet and outlet) and two positions...
3/2 N.OPEN SOLENOID VALVE INOX 1/8" 1/4" DIRECT CONTROL

€56.25 (tax excl.)
€68.06 (tax included)
A 3/2 N.open stainless steel 1/8" 1/4" direct control solenoid valve is used in systems that control the flow of liquids or gases to direct the passage of a fluid. Applications: Industrial automation, Food and...
C4 SOLENOID VALVE COIL

€12.85 (tax excl.)
€15.55 (tax included)
A C4 solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems. Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...
SOLENOID VALVE COIL C1

€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
2/2 N.CLOSED SOLENOID VALVE 1/4" AL02

€23.11 (tax excl.)
€27.96 (tax included)
The 2/2 N.closed 1/4" AL02 solenoid valve is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter duct. The valve has 2 ways (inlet and outlet) and 2 positions (open and...
T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
3/2 NO. OPEN SOLENOID VALVE 1/4" AC02

€30.99 (tax excl.)
€37.50 (tax included)
The AC02 3/2 N. open solenoid valve (1/4") allows you to control the flow of compressed air, permitting or blocking its passage through three ports, one of which is 1/4" in diameter. It has 3 ports and 2 positions....
SOLENOID VALVE 2/2 N.CLOSED 1/8" AL01

€14.07 (tax excl.)
€17.02 (tax included)
A 2/2 normally closed (N.C.) solenoid valve, 1/8" AL01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" air line in...
2/2 NO. OPEN SOLENOID VALVE STAINLESS STEEL DIRECT ACTION

€58.60 (tax excl.)
€70.91 (tax included)
INOX-304 Solenoid Valve Normally Open. Size from 1/8" to 1/2" It comes with a coil and connector. Available in high pressure and NPT thread. IP-65 protection Operating temperature -20ºC / 80ºC Viscosity limit 20 cST....
C3 8W SOLENOID VALVE COIL

€8.80 (tax excl.)
€10.65 (tax included)
A C3 8W solenoid coil is the essential electromagnetic component that activates a solenoid valve mechanism, allowing or stopping the flow of fluid (liquid or gas) in a system. 8W indicates the power consumption....
Recently Viewed
3/2 N. CLOSED SOLENOID VALVE 1/8" AC01

€25.29 (tax included)
€20.90 (tax excl.)
The AC01 3/2 N. normally closed 1/8" solenoid valve is used to control the flow of compressed air in industrial automation systems. It offers a third position that allows a specific port to be connected or...
Lockable swivel joint

€23.39 (tax excl.)
€28.31 (tax included)
A lockable swivel joint is a type of joint that allows rotary movement in a single plane, but can be locked in place to prevent further movement. It is a common component in many types of machinery and equipment,...
SEMI-QUICK T-TUBE JOINT

€2.62 (tax excl.)
€3.17 (tax included)
semi-fast connection tube A semi-quick pipe connector allows you to split or join three pipe lines using semi-quick connections without the need for tools, guaranteeing a quick, safe and watertight connection. Main...

Menu

Please sign in first.

Sign in