Click for more products.
No products were found.

SOLENOID VALVE 2/2 N.ABIERTA 1/4" AN02

A 2/2 N.abierta solenoid valve, 1/4" AN20, is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter conduit. The valve has two ports (inlet and outlet) and two positions (open and closed). It is normally open, meaning air flows until an electrical signal is received to close it.

Applications: robotics, packaging systems, machinery, industrial automation.

Technical specifications:

  • Direct control solenoid valve.
  • Differential pressure is not required for its proper functioning.
  • Mounting position is irrelevant.
  • It is possible to change the coil without removing the valve.
  • Various sealing gaskets depending on the fluid used.
  • Applications: Compressed air, inert gases, diesel, steam, vacuum and in general all fluids compatible with the available sealing gaskets.
  • Maximum permissible viscosity: 5º Engler.
  • C3 type connection coil
Read moreShow less
€42.53 (tax incl.)
€35.15 (tax excl.)
Reference:
6026
Description

2/2 N.abierta solenoid valve 1/4" AN20

ELEC.VALVULA 22 N.ABIERTA 14 AN02

Read moreShow less
Product Details
6026
Comments (0)
You may also like
€1.00 (tax excl.)
€1.21 (tax incl.)
A DIN-43650-A T-30 coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and a coil of an electromechanical device. The T-30...
€8.80 (tax excl.)
€10.65 (tax incl.)
A C3 8W solenoid coil is the essential electromagnetic component that activates a solenoid valve mechanism, allowing or stopping the flow of fluid (liquid or gas) in a system. 8W indicates the power consumption....
8 other products in the same category:
€30.99 (tax excl.)
€37.50 (tax incl.)
3/2 N. closed solenoid valve 1/4" AC02 Technical specifications: Direct acting solenoid valve 1/4". Differential pressure is not required for its proper functioning. Mounting position is irrelevant. It is possible to...
€58.60 (tax excl.)
€70.91 (tax incl.)
INOX-304 Solenoid Valve Normally Open. Size from 1/8" to 1/2" It comes with a coil and connector. Available in high pressure and NPT thread. IP-65 protection Operating temperature -20ºC / 80ºC Viscosity limit 20 cST....
€21.72 (tax excl.)
€26.28 (tax incl.)
A 2/2 N.abierta solenoid valve, 1/8" AN01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" diameter air passage when it...
€12.85 (tax excl.)
€15.55 (tax incl.)
A C4 solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems. Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...
€20.90 (tax excl.)
€25.29 (tax incl.)
The AC09 3/2 N. open solenoid valve (1/8") allows you to control the flow of compressed air by permitting or blocking its passage through three ports, one of which has a 1/8" diameter. The valve has 3 ports and 2...
€1.00 (tax excl.)
€1.21 (tax incl.)
A DIN-43650-A T-30 coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and a coil of an electromechanical device. The T-30...
€56.25 (tax excl.)
€68.06 (tax incl.)
A 3/2 N.open stainless steel 1/8" 1/4" direct control solenoid valve is used in systems that control the flow of liquids or gases to direct the passage of a fluid. Applications: Industrial automation, Food and...
€64.00 (tax excl.)
€77.44 (tax incl.)
A 3/2 N. normally closed 1/4" stainless steel direct drive solenoid valve is an electromagnetic valve designed to control the flow of a fluid (typically compressed air) in low flow pneumatic or hydraulic systems....
Recently Viewed
€42.53 (tax incl.)
€35.15 (tax excl.)
A 2/2 N.abierta solenoid valve, 1/4" AN20, is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter conduit. The valve has two ports (inlet and outlet) and two positions...
€13.88 (tax excl.)
€16.79 (tax incl.)
A Stauffer grease gun is a hand-operated lubricator designed for the controlled and progressive application of grease to lubrication points on machinery. It features a small reservoir with a threaded cap that is...
€49.00 (tax excl.)
€59.29 (tax incl.)
A 5/2 monostable valve VA14 1501C00001 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
€77.35 (tax excl.)
€93.59 (tax incl.)
An ISO I pneumatic pilot distributor is used to control the flow and direction of compressed air in pneumatic systems, allowing the operation of cylinders and other actuators. Applications: Industrial automation,...
€116.53 (tax excl.)
€141.00 (tax incl.)
Single acting pneumatic actuator. It is used for the control and regulation of butterfly, ball, gate valves, etc., with different maneuvers and diameters between DN 15 and DN 1000. External regulation of the opening...
€37.86 (tax excl.)
€45.81 (tax incl.)
A compressed air tank is a pressure vessel designed to store compressed air. This compressed air is generated by a compressor and stored in the tank, serving as a reserve of pneumatic energy. Compressed air boilers...

Menu

Settings