Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
3/2 NO. OPEN SOLENOID VALVE 1/8" AC09

3/2 NO. OPEN SOLENOID VALVE 1/8" AC09

The AC09 3/2 N. open solenoid valve (1/8") allows you to control the flow of compressed air by permitting or blocking its passage through three ports, one of which has a 1/8" diameter. The valve has 3 ports and 2 positions. It is normally open, meaning the outlet port is connected to the inlet until an electrical signal is applied to block it.

Applications: Industrial automation, Control systems, Process machinery.

Technical specifications:

  • Differential pressure is not required for its proper functioning.
  • Mounting position is irrelevant.
  • It is possible to change the coil without removing the valve.
  • Various sealing gaskets depending on the fluid used.
  • Applications: Compressed air, inert gases, diesel, steam, vacuum and in general all fluids compatible with the available sealing gaskets.
  • Maximum permissible viscosity: 5º Engler.
  • C1 type mounting coil NOT INCLUDED
  • Normally open
€25.29 (tax included)
€20.90 (tax excl.)
Reference:
6028
Description

3/2 N. open solenoid valve 1/8" AC09

Product Details
6028
Comments
Related products
T-22 COIL CONNECTOR DIN-43650-B T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
SOLENOID VALVE COIL C1 SOLENOID VALVE COIL C1

€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
12 other products in the same category:
3/2 N.OPEN SOLENOID VALVE INOX 1/8" 1/4" DIRECT CONTROL

€56.25 (tax excl.)
€68.06 (tax included)
A 3/2 N.open stainless steel 1/8" 1/4" direct control solenoid valve is used in systems that control the flow of liquids or gases to direct the passage of a fluid. Applications: Industrial automation, Food and...
C3 8W SOLENOID VALVE COIL

€8.80 (tax excl.)
€10.65 (tax included)
A C3 8W solenoid coil is the essential electromagnetic component that activates a solenoid valve mechanism, allowing or stopping the flow of fluid (liquid or gas) in a system. 8W indicates the power consumption....
2/2 N.CLOSED SOLENOID VALVE 1/4" AL02

€23.11 (tax excl.)
€27.96 (tax included)
The 2/2 N.closed 1/4" AL02 solenoid valve is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter duct. The valve has 2 ways (inlet and outlet) and 2 positions (open and...
T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
3/2" SOLENOID VALVE CLOSED 1/8" STAINLESS STEEL DIRECT CONTROL

€32.20 (tax excl.)
€38.96 (tax included)
A 3/2 N. closed 1/8" Inox direct control solenoid valve is used to control the flow of a fluid (usually compressed air) in pneumatic systems. It has 3 ways and 2 positions. The movement of the plunger that controls...
SOLENOID VALVE 2/2 NO. OPEN 1/4" AN02

€35.15 (tax excl.)
€42.53 (tax included)
A 2/2 N. open solenoid valve, 1/4" AN20, is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter conduit. The valve has two ports (inlet and outlet) and two positions...
2/2 N.OPEN SOLENOID VALVE LINEAR BORE AN11

€22.00 (tax excl.)
€26.62 (tax included)
A 2/2 N. open linear flow AN11 solenoid valve is a pneumatic component used in industrial automation systems to control compressed air flow. The valve has two ports (inlet and outlet) and two positions (open and...
3/2 NO. OPEN SOLENOID VALVE 1/4" AC02

€30.99 (tax excl.)
€37.50 (tax included)
The AC02 3/2 N. open solenoid valve (1/4") allows you to control the flow of compressed air, permitting or blocking its passage through three ports, one of which is 1/4" in diameter. It has 3 ports and 2 positions....
T-30 COIL CONNECTOR DIN-43650-A

€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
3/2" SOLENOID VALVE CLOSED 1/4" STAINLESS STEEL DIRECT CONTROL

€64.00 (tax excl.)
€77.44 (tax included)
A 3/2 N. closed 1/4" stainless steel direct control solenoid valve is an electromagnetic valve designed to control the flow of a fluid (typically compressed air) in low flow pneumatic or hydraulic systems....
3/2 N. CLOSED SOLENOID VALVE 1/8" AC01

€20.90 (tax excl.)
€25.29 (tax included)
The AC01 3/2 N. normally closed 1/8" solenoid valve is used to control the flow of compressed air in industrial automation systems. It offers a third position that allows a specific port to be connected or...
T-22 AC/DC LED CONNECTOR

€4.14 (tax excl.)
€5.01 (tax included)
A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...
Recently Viewed
3/2 NO. OPEN SOLENOID VALVE 1/8" AC09

€25.29 (tax included)
€20.90 (tax excl.)
The AC09 3/2 N. open solenoid valve (1/8") allows you to control the flow of compressed air by permitting or blocking its passage through three ports, one of which has a 1/8" diameter. The valve has 3 ports and 2...
BRASS HOLLOW CONE NOZZLE 10 L/min

€12.00 (tax excl.)
€14.52 (tax included)
A 10 L/min brass hollow cone nozzle is used to atomize liquids, creating a hollow cone shaped spray pattern. Applications: Foam removal, washing and rinsing, dust treatment, cleaning, cooling, shut-off,...
VALVE 5/3 PRESSURE CENTER VF14 1501C00016

€83.00 (tax excl.)
€100.43 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
GREASE PUMP WITH HOSE 500 gr 12633

€28.80 (tax excl.)
€34.85 (tax included)
Technical data Pump outlet connection: M 10 x 1 Capacity: 500ml Filling options: 400 g, Lubricationcartridge, DIN 1284, or bulk grease Grease supply piston diameter: 8mm Grease supply piston actuation: lever Volume /...
MAXI FEMALE ADAPTER DN-9 ISO 6150 B-15

€2.40 (tax excl.)
€2.90 (tax included)
Maxi female adapter DN-9 ISO 6150 B-15 Used to join a hose or pneumatic component with a standard female thread to a quick connection system of the ISO 6150 B-15 type. It complies with ISO 6150, ensuring its...
BANJO BALL 45º FOR BRAKE PIPE

€4.13 (tax excl.)
€5.00 (tax included)
A 45° banjo ball for brake pipe is a hydraulic connector specific to brake systems that offers a compact connection. Applications: Automotive and motorcycle braking systems, Industrial braking systems Technical sheet:...

Menu

Please sign in first.

Sign in