2/2 N.OPEN SOLENOID VALVE LINEAR BORE AN11

A 2/2 N. open linear flow AN11 solenoid valve is a pneumatic component used in industrial automation systems to control compressed air flow. The valve has two ports (inlet and outlet) and two positions (open and closed). It is normally open, meaning air flow is permitted until an electrical signal is applied to close it. Linear flow means the shutter moves in a straight line to open or close the flow of fluid.

Technical sheet:

Direct-operated solenoid valve. 1/8" male thread.
No differential pressure is required for proper operation.
Vertical mounting position.
Applicable by design for compressor head discharge.
Applications: Compressed air, inert gases, diesel, steam, and in general all fluids compatible with the available sealing gaskets.
Applicable to the compressor head to discharge it.
Maximum viscosity allowed: 5º Engler.
Mounting coil type C3, supplied separately.

€26.62 (tax included)

€22.00 (tax excl.)

Reference:

6024

Description
Comments

Description

2/2 N.open solenoid valve linear passage AN11

ELEC.VALVULA 22 N.ABIERTA PASO LINEAL AN11

Product Details

Reference 6024

Comments

T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)

€1.21 (tax included)

A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...

SOLENOID VALVE COIL C1

€7.51 (tax excl.)

€9.09 (tax included)

A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...

12 other products in the same category:

2/2 NO. OPEN SOLENOID VALVE STAINLESS STEEL DIRECT ACTION

€58.60 (tax excl.)

€70.91 (tax included)

INOX-304 Solenoid Valve Normally Open. Size from 1/8" to 1/2" It comes with a coil and connector. Available in high pressure and NPT thread. IP-65 protection Operating temperature -20ºC / 80ºC Viscosity limit 20 cST....

3/2" SOLENOID VALVE CLOSED 1/4" STAINLESS STEEL DIRECT CONTROL

€64.00 (tax excl.)

€77.44 (tax included)

A 3/2 N. closed 1/4" stainless steel direct control solenoid valve is an electromagnetic valve designed to control the flow of a fluid (typically compressed air) in low flow pneumatic or hydraulic systems....

3/2 N.OPEN SOLENOID VALVE INOX 1/8" 1/4" DIRECT CONTROL

€56.25 (tax excl.)

€68.06 (tax included)

A 3/2 N.open stainless steel 1/8" 1/4" direct control solenoid valve is used in systems that control the flow of liquids or gases to direct the passage of a fluid. Applications: Industrial automation, Food and...

C4 SOLENOID VALVE COIL

€12.85 (tax excl.)

€15.55 (tax included)

A C4 solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems. Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...

2/2 N.CLOSED SOLENOID VALVE 1/4" AL02

€23.11 (tax excl.)

€27.96 (tax included)

The 2/2 N.closed 1/4" AL02 solenoid valve is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter duct. The valve has 2 ways (inlet and outlet) and 2 positions (open and...

T-30 COIL CONNECTOR DIN-43650-A

€1.00 (tax excl.)

€1.21 (tax included)

A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...

T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)

€1.21 (tax included)

SOLENOID VALVE 2/2 NO. OPEN 1/4" AN02

€35.15 (tax excl.)

€42.53 (tax included)

A 2/2 N. open solenoid valve, 1/4" AN20, is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter conduit. The valve has two ports (inlet and outlet) and two positions...

C3 8W SOLENOID VALVE COIL

€8.80 (tax excl.)

€10.65 (tax included)

A C3 8W solenoid coil is the essential electromagnetic component that activates a solenoid valve mechanism, allowing or stopping the flow of fluid (liquid or gas) in a system. 8W indicates the power consumption....

T-22 AC/DC LED CONNECTOR

€4.14 (tax excl.)

€5.01 (tax included)

A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...

2/2 NO. CLOSED SOLENOID VALVE STAINLESS STEEL DIRECT ACTION

€46.35 (tax excl.)

€56.08 (tax included)

2/2 N. normally closed solenoid valve, stainless steel, direct control A 2/2 N. normally closed stainless steel direct acting solenoid valve is an electromechanical control device designed to open or close the passage...

SOLENOID VALVE 2/2 N.CLOSED 1/8" AL01

€14.07 (tax excl.)

€17.02 (tax included)

A 2/2 normally closed (N.C.) solenoid valve, 1/8" AL01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" air line in...