Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
VALVE 5/3 PRESSURE CENTER VF14 1501C00016
VALVE 5/3 PRESSURE CENTER VF14 1501C00016
VALVE 5/3 PRESSURE CENTER VF14 1501C00016
VALVE 5/3 PRESSURE CENTER VF14 1501C00016
VALVE 5/3 PRESSURE CENTER VF14 1501C00016
VALVE 5/3 PRESSURE CENTER VF14 1501C00016

VALVE 5/3 PRESSURE CENTER VF14 1501C00016

Sub-D multipolar integrated system

  • Simplicity and versatility of assembly and wiring.
  • Double electric pilot, housed on the same side, reducing the size of the battery.
  • Wide range of valves and modules, threads and pitches.
  • Possibility of mounting up to 20 bistable solenoid valves in the same block (40 signals)
  • Multipolar connector 25 pin for 2 to 10 valve positions or 44 pin for 2 to 20 valve positions.
  • IP-40 protection rating for 25 pins or IP-65 for 25 and 44 pins
  • Voltage 24V DC Power 1.3 W Electrical configuration PNP
  • Operating temperature -5ºC / 50ºC
€100.43 (tax included)
€83.00 (tax excl.)
SELECT THE THREAD
  • 1/4"
  • Ø 6
  • Ø 8
Reference:
57090009
Description

Product Details
57090009
Comments
12 other products in the same category:
BLIND MODULE MS

€8.20 (tax excl.)
€9.92 (tax included)
An MS blanking module is a component used in structured cabling systems, specifically in patch panels or junction boxes, with the primary function of occupying an unused space or port, preventing the entry of dust,...
VALVE 3/2 NC + 3/2 NO VD14 1501C00010

€82.00 (tax excl.)
€99.22 (tax included)
One valve 3/2 NC + 3/2 NO VD14 1501C00010 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
DIN RAIL FIXING KIT

€7.72 (tax excl.)
€9.34 (tax included)
A DIN rail mounting kit is a set of components designed to ensure the correct and stable installation of devices and equipment on a DIN rail. It includes mounting brackets and mounting screws. They are essential for...
POWER CABLE 44 PIN IP-65 1601C000014

€158.00 (tax excl.)
€191.18 (tax included)
44-pin IP-65 power cable for integrated multipolar Sub-D system Choice between 3 cable lengths: 3.5 or 10 meters. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side,...
VALVE 5/3 CENTER TO EXHAUST VE14 1501C00013

€83.00 (tax excl.)
€100.43 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of mounting and wiring. Double electropilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
POWER CABLE 25 PIN IP-65 1601C00006

€117.00 (tax excl.)
€141.57 (tax included)
25-pin IP-65 power cable for integrated multipolar Sub-D system Choice between 3 cable lengths: 3.5 or 10 meters. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side,...
VALVE 5/3 CLOSED CENTER VC14 1501C00007

€71.00 (tax excl.)
€85.91 (tax included)
A 5/3 closed center valve VC14 1501C00007 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
LEG FIXING KIT 1601C000017

€8.50 (tax excl.)
€10.29 (tax included)
A 1601C000017 leg fixing kit is a set of components for securing or mounting a SIM-150 multipolar integrated system. This kit includes brackets and screws that allow you to anchor, level and stabilize the SIM-150...
5/2 MONOSTABLE VALVE VA14 1501C00001

€49.00 (tax excl.)
€59.29 (tax included)
A 5/2 monostable valve VA14 1501C00001 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
MULTIPOLAR COVER TI LEFT 25 PIN 1501C00123

€41.92 (tax excl.)
€50.72 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of mounting and wiring. Double electropilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
VALVE 5/2 DOUBLE VB14 1501C00004

€63.00 (tax excl.)
€76.23 (tax included)
A 5/2 bistable valve VB14 1501C00004 is a pneumatic control valve used in Sub-D multipole integrated systems. It features 5 ports (2 inlet, 2 outlet, and 1 exhaust) and 2 stable operating positions (bistable)....
MULTIPOLAR BASE MODULE 2 POSITIONS

€35.00 (tax excl.)
€42.35 (tax included)
A 2-position multipole base module is used to control two 150 series solenoid valves simultaneously. Each position is equipped with two electrical signals, allowing the solenoid valves to be connected and controlled...
Recently Viewed
VALVE 5/3 PRESSURE CENTER VF14 1501C00016

€100.43 (tax included)
€83.00 (tax excl.)
Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
GREASE PUMP WITH HOSE 500 gr 12633

€28.80 (tax excl.)
€34.85 (tax included)
Technical data Pump outlet connection: M 10 x 1 Capacity: 500ml Filling options: 400 g, Lubricationcartridge, DIN 1284, or bulk grease Grease supply piston diameter: 8mm Grease supply piston actuation: lever Volume /...
MAXI FEMALE ADAPTER DN-9 ISO 6150 B-15

€2.40 (tax excl.)
€2.90 (tax included)
Maxi female adapter DN-9 ISO 6150 B-15 Used to join a hose or pneumatic component with a standard female thread to a quick connection system of the ISO 6150 B-15 type. It complies with ISO 6150, ensuring its...
BANJO BALL 45º FOR BRAKE PIPE

€4.13 (tax excl.)
€5.00 (tax included)
A 45° banjo ball for brake pipe is a hydraulic connector specific to brake systems that offers a compact connection. Applications: Automotive and motorcycle braking systems, Industrial braking systems Technical sheet:...
ELECTRICAL OIL LEVEL WITH FLANGE

€63.00 (tax excl.)
€76.23 (tax included)
A flanged electric oil level gauge is a measurement and control device designed to electronically detect and signal the presence (or absence) of oil at a preset level within a tank. Unlike visual sight gauges, this...
ISO 15552 CYLINDER HOLLOW STEM K1F

€209.54 (tax excl.)
€253.54 (tax included)
ISO-15552 CYLINDER WITH THROUGH HOLLOW ROD USED FOR VACUUM APPLICATIONS Cylinder manufactured under ISO-15552 standard except the stem thread. By having a hollow stem, it allows the circulation of fluids, vacuum etc...

Menu

Please sign in first.

Sign in