Click for more products.
No produts were found.
Click for more products.
No produts were found.

VALVE 5/3 CLOSED CENTER VC14 1501C00007

A 5/3 closed center valve VC14 1501C00007

Technical sheet:

  • Sub-D multipolar integrated system
  • Simplicity and versatility of assembly and wiring.
  • Double electropilot, housed on the same side, reducing the size of the battery.
  • Wide range of valves and modules, threads and pitches.
  • Possibility of mounting up to 20 bistable solenoid valves in the same block (40 signals)
  • Multipolar connector 25 pin from 2 to 10 valve positions or 44 pin from 2 to 20 valve positions.
  • Protection degree IP-40 in 25 pin or IP-65 in 25 and 44 pins
  • Voltage 24V DC Power 1.3 W
  • PNP electrical configuration
  • Working temperature -5ºC / 50ºC
  • Working pressure Vacuum -1 / 10 bar.
€85.91 (tax included)
€71.00 (tax excl.)
SELECT THE THREAD
  • 1/4"
  • Ø 6
  • Ø 8
Reference:
57060009
Description

valve 5/3 closed center VC14 1501C00007

Product Details
57060009
Comments
12 other products in the same category:
€82.00 (tax excl.)
€99.22 (tax included)
One valve 3/2 NC + 3/2 NO VD14 1501C00010 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
€8.20 (tax excl.)
€9.92 (tax included)
An MS blanking module is a component used in structured cabling systems, specifically in patch panels or junction boxes, with the primary function of occupying an unused space or port, preventing the entry of dust,...
€63.00 (tax excl.)
€76.23 (tax included)
A 5/2 bistable valve VB14 1501C00004 is a pneumatic control valve used in Sub-D multipole integrated systems. It features 5 ports (2 inlet, 2 outlet, and 1 exhaust) and 2 stable operating positions (bistable)....
€2.56 (tax excl.)
€3.10 (tax included)
A 1531C00010 module closure plug is essential in electrical or electronic systems. Its main function is to close and seal a port or connection. It prevents dust particles, moisture, or any other contaminants from...
€49.00 (tax excl.)
€59.29 (tax included)
A 5/2 monostable valve VA14 1501C00001 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
€117.00 (tax excl.)
€141.57 (tax included)
25-pin IP-65 power cable for integrated multipolar Sub-D system Choice between 3 cable lengths: 3.5 or 10 meters. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side,...
€83.00 (tax excl.)
€100.43 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
€158.00 (tax excl.)
€191.18 (tax included)
44-pin IP-65 power cable for integrated multipolar Sub-D system Choice between 3 cable lengths: 3.5 or 10 meters. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side,...
€35.00 (tax excl.)
€42.35 (tax included)
A 2-position multipole base module is used to control two 150 series solenoid valves simultaneously. Each position is equipped with two electrical signals, allowing the solenoid valves to be connected and controlled...
€8.50 (tax excl.)
€10.29 (tax included)
A 1601C000017 leg fixing kit is a set of components for securing or mounting a SIM-150 multipolar integrated system. This kit includes brackets and screws that allow you to anchor, level and stabilize the SIM-150...
€41.92 (tax excl.)
€50.72 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of mounting and wiring. Double electropilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
€83.00 (tax excl.)
€100.43 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of mounting and wiring. Double electropilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
Recently Viewed
€85.91 (tax included)
€71.00 (tax excl.)
A 5/3 closed center valve VC14 1501C00007 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
€73.20 (tax excl.)
€88.57 (tax included)
A 140-piece grease nipple case 16090 is a maintenance kit containing a wide variety of grease nipples, used for the lubrication of machinery and equipment. Applications: Automotive and heavy machinery workshops,...
€2.00 (tax excl.)
€2.42 (tax included)
Base blanking plate is used to close and seal openings in bases or structures such as electrical boxes, control panels, electronic equipment or machinery. Its primary function is to protect internal components from...
€11.25 (tax excl.)
€13.61 (tax included)
The glass profile is a rubber profile in SBR, ideal for the glass sector and industry in general, to be used for joining glass with 3 to 5 mm sheet metal. This profile goes together with another rubber profile, called...
€3.33 (tax excl.)
€4.03 (tax included)
A miniature center male tee is a small "T" shaped connector used in compact piping systems or small diameter conduits. It is used in tight spaces where a "T" connection and an additional threaded outlet are needed....
€18.11 (tax excl.)
€21.91 (tax included)
Perforated strap hook It is expressly designed to hold and secure straps with regular perforations. These hooks are essential in a wide variety of industrial, logistics and organizational applications, where quick and...

Menu