Click for more products.
No produts were found.
Click for more products.
No produts were found.

3/2" SOLENOID VALVE CLOSED 1/8" STAINLESS STEEL DIRECT CONTROL

A 3/2 N. closed 1/8" Inox direct control solenoid valve is used to control the flow of a fluid (usually compressed air) in pneumatic systems. It has 3 ways and 2 positions. The movement of the plunger that controls the fluid flow is directly actuated by the force of the electromagnet.

Technical sheet:

  • Function: Normally closed.
  • Pressure 0-10 bar (max. 40 bar)
  • VITON gasket Possibility of ordering in NBR - EPDM
  • Hole Ø 1.5mm
  • Temperature -10 / 130ºC.
  • No differential pressure is required for proper operation.
  • Mounting position indifferent.
  • It is possible to change the coil without having to disassemble the valve.
  • Mounting coil type C1
€38.96 (tax included)
€32.20 (tax excl.)
Reference:
6040
Description

3/2 N.closed solenoid valve 1/8" Stainless steel direct control

ELEC.VALVULA 32 N.CERRADA 18 INOX

Product Details
6040
Comments
Related products
€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
9 other products in the same category:
€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
€46.35 (tax excl.)
€56.08 (tax included)
2/2 N. normally closed solenoid valve, stainless steel, direct control A 2/2 N. normally closed stainless steel direct acting solenoid valve is an electromechanical control device designed to open or close the passage...
€64.00 (tax excl.)
€77.44 (tax included)
A 3/2 N. closed 1/4" stainless steel direct control solenoid valve is an electromagnetic valve designed to control the flow of a fluid (typically compressed air) in low flow pneumatic or hydraulic systems....
€56.25 (tax excl.)
€68.06 (tax included)
A 3/2 N.open stainless steel 1/8" 1/4" direct control solenoid valve is used in systems that control the flow of liquids or gases to direct the passage of a fluid. Applications: Industrial automation, Food and...
€58.60 (tax excl.)
€70.91 (tax included)
INOX-304 Solenoid Valve Normally Open. Size from 1/8" to 1/2" It comes with a coil and connector. Available in high pressure and NPT thread. IP-65 protection Operating temperature -20ºC / 80ºC Viscosity limit 20 cST....
€11.00 (tax excl.)
€13.31 (tax included)
MA30 coil for stainless steel solenoid valve An MA30 coil for stainless steel solenoid valves is an electromagnetic component designed to activate stainless steel solenoid valves, ensuring reliable, fast, and...
Recently Viewed
€38.96 (tax included)
€32.20 (tax excl.)
A 3/2 N. closed 1/8" Inox direct control solenoid valve is used to control the flow of a fluid (usually compressed air) in pneumatic systems. It has 3 ways and 2 positions. The movement of the plunger that controls...
€17.15 (tax excl.)
€20.75 (tax included)
An EN-1092-1-11B stainless steel welding neck flange (Formerly DIN-2176, DIN-2502 standard) is distinguished by having a long, tapered neck that is welded to the pipe, creating a robust and reliable joint....

Menu