Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
BLOW-IN PULL-IN
BLOW-IN PULL-IN
BLOWN WALL THROUGH
BLOWN WALL THROUGH
BLOW-IN PULL-IN
BLOW-IN PULL-IN
BLOWN WALL THROUGH
BLOWN WALL THROUGH

BLOW-IN PULL-IN

A blow-through fitting allows blow-through valves to be connected to the injector tubes through the filter wall in a watertight manner, eliminating the need for welding.

Applications: cleaning of bag and cartridge filters, dust removal systems and dust collectors, pneumatic installations

Main features :

  • Eliminates welding in through-wall installations.
  • Temperature -20ºC/130ºC
  • It is normally used with blow valves that have compression fittings.
  • Top-loading dust collectors require installation and removal of collection bags or cartridges from the top of the housing, above the blow tubes.
€42.35 (tax included)
€35.00 (tax excl.)
DIAMETERS
  • Ø 3/4"
  • Ø 1"
  • Ø 1-1/2"
  • Ø 2"
Reference:
6039101
Description

Bulkhead fitting for blowing

The bulkhead fitting for blowing systems is a component designed to allow the passage of air or pressurized fluid through walls, tanks or panels, guaranteeing a watertight, safe and resistant connection.

It is commonly used in air cleaning (blowing), filtration and pneumatic systems.

Applications

  • Filter blowing systems
  • Compressed air cleaning
  • Industrial pneumatic installations
  • Air material handling equipment
  • Tanks, hoppers and enclosed cabins

Technical specifications of a blower tube:

Product Details
6039101
Comments
12 other products in the same category:
ANALOG TIMER T-22 DIN 43650-B

€37.84 (tax excl.)
€45.79 (tax included)
The T-22 DIN 43650-B analog timer is a programmable device for joint use with elements that have a DIN 43650 B type connection. It is applied with solenoid valves for draining compressor boilers such as air transport...
T-30 COIL CONNECTOR DIN-43650-A

€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
COMPRESSION FITTING BLOW SOLENOID VALVE

€57.00 (tax excl.)
€68.97 (tax included)
Valves designed for bag filter blowing installations, WITH COMPRESSION FITTING Speed and high flow. Membrane closure. Working pressure 0.5 - 8 bar. Temperature -40 / 80ºC. Aluminum body. Voltages to choose from...
SOLENOID VALVE FOR BLOW FILTERS

€40.25 (tax excl.)
€48.70 (tax included)
A bag filter blow solenoid valve is an electromechanical device used in compressed air cleaning systems for bag filters. Applications: Industrial bag filters, Emission control systems, Cement plants, mining, steel,...
NBR BLOW-IN VALVE DIAPHRAGM REPLACEMENT

€22.00 (tax excl.)
€26.62 (tax included)
The NBR blow-off valve membrane replacement is designed to ensure a tight seal and optimal valve functionality, allowing for efficient filter blow-off and expulsion of accumulated particles. Applications: Pneumatic...
VITON BLOW-MOUNTED VALVE DIAPHRAGM REPLACEMENT

€20.70 (tax excl.)
€25.05 (tax included)
The replacement membrane for a Viton blow-off valve is the internal flexible component that allows the airflow to be opened and closed in a blow-off valve. Applications: Dust collectors, cement plants, foundries,...
ATEX BLOWING SOLENOID VALVE COIL

€20.00 (tax excl.)
€24.20 (tax included)
An ATEX blow-off solenoid valve coil . It is used to operate a blow-off solenoid valve in industrial cleaning systems, mainly in dust collectors with bag or cartridge filters in places or environments with a risk of...
COIL FOR BLOWING SOLENOID VALVE

€12.00 (tax excl.)
€14.52 (tax included)
A Ø10 solenoid valve coil is used to operate a solenoid valve in industrial cleaning systems, mainly in dust collectors with bag filters or cartridges. It generates a magnetic field when energized that opens or closes...
DIN-43650-A LED T-30 CONNECTOR

€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
PNEUMATIC FILTER BLOWOUT VALVE

€31.42 (tax excl.)
€38.02 (tax included)
The pneumatic filter blow valve is designed for the automatic cleaning of filters by means of compressed air pulses. Applications: industrial filtration systems (such as dust collectors or bag filters) Main features:...
ANALOG TIMER T-30

€37.84 (tax excl.)
€45.79 (tax included)
The T-30 analog timer is an electromechanical device used to activate or deactivate an electrical circuit after a preset time. Like the T-22 DIN 43650-B, but with some differences, it is used to control processes that...
FILTER BLOWOUT VALVE COMPRESSION FITTING

€39.21 (tax excl.)
€47.44 (tax included)
A compression fitting filter blow valve is designed for purging and cleaning filters in compressed air systems, fluids or industrial processes. Applications: Compressed air systems, Industrial filters and condensate...
Recently Viewed
BLOW-IN PULL-IN

€42.35 (tax included)
€35.00 (tax excl.)
A blow-through fitting allows blow-through valves to be connected to the injector tubes through the filter wall in a watertight manner, eliminating the need for welding. Applications: cleaning of bag and cartridge...
NBR O-RING THREAD

€1.00 (tax excl.)
€1.21 (tax included)
NBR O-ring thread The O-ring or cord is an extruded profile with a circular section. O-rings allow the manufacture of virtually any gasket size without the need to invest in expensive moulding tools. Once the required...
QUICK PLUG MULTIPRESS HOSE

€4.96 (tax excl.)
€6.00 (tax included)
Quick coupling multi-pressure hose Used to quickly connect and disconnect compressed air hoses to various components of a pneumatic system. It is versatile as it can adapt to different sizes and types of hoses....
MANOMETER Ø40 SIDE THREAD 1/8"

€5.78 (tax excl.)
€6.99 (tax included)
A Ø40 1/8" side thread pressure gauge is used to measure the pressure of fluids, such as air, water or oil, within a system. Applications: Pneumatic industry, Hydraulic industry, Industrial processes or Boilers....
SINGLE SCREW

€0.68 (tax excl.)
€0.82 (tax included)
A simple screw is the hollow bolt used to attach a single banjo-type terminal to a pressure port. Applications: automotive, agricultural machinery, industrial hydraulics. Main features: 60° conical closure fitting...
PM2 resistive manual pump

€45.00 (tax excl.)
€54.45 (tax included)
A PM2 resistive hand pump is used to supply oil to lubrication systems in a precise and controlled manner. The PM2 model is notable for its durability and adjustability. It is used to supply oil to lubrication...

Menu

Please sign in first.

Sign in