Click for more products.
No products were found.

ATEX BLOWING SOLENOID VALVE COIL

An ATEX blow-off solenoid valve coil . It is used to operate a blow-off solenoid valve in industrial cleaning systems, mainly in dust collectors with bag or cartridge filters in places or environments with a risk of explosion.

Applications: Dust collectors, Food industry, Pharmaceutical industry, Cement industry.

Technical data sheet:

  • Product classification: II 3 GD (equipment group II, category 3 for gas zone 2, and dust zone 22)
  • Gas group: IIB or IIC
  • Dust group: IIIB or IIIC
  • Temperature class (gas): T5
  • Max surface temperature (dust): T140ºC
  • EPL protection level: Gc (gas), Dc (dust)
Read moreShow less
€32.67 (tax incl.)
€27.00 (tax excl.)
POWER
  • 24VAC
  • 24V DC
  • 110V AC
  • 220VAC
Reference:
603114
Description

ATEX blow-off solenoid valve coil

Harmonized standards for use:

  • EN IEC 60079-0:2018. Explosive atmospheres - Part 0 = Equipment - General requirements
  • IEC 60079-15:2017. Explosive atmospheres - Part 15 = protection of equipment by type of protection "n"
  • EN 60079-31:2014. Explosive atmospheres - Part 31 = Protection against ignition of equipment dust by means of a "t" enclosure.
Read moreShow less
Product Details
603114
Comments (0)
8 other products in the same category:
€40.25 (tax excl.)
€48.70 (tax incl.)
A bag filter blow solenoid valve is an electromechanical device used in compressed air cleaning systems for bag filters. Applications: Industrial bag filters, Emission control systems, Cement plants, mining, steel,...
€39.21 (tax excl.)
€47.44 (tax incl.)
A compression fitting filter blow valve is designed for purging and cleaning filters in compressed air systems, fluids or industrial processes. Applications: Compressed air systems, Industrial filters and condensate...
€20.70 (tax excl.)
€25.05 (tax incl.)
The replacement membrane for a Viton blow-off valve is the internal flexible component that allows the airflow to be opened and closed in a blow-off valve. Applications: Dust collectors, cement plants, foundries,...
€37.84 (tax excl.)
€45.79 (tax incl.)
The T-22 DIN 43650-B analog timer is a programmable device for use with elements that have a DIN 43650 B type connection. It is applied with solenoid valves for draining compressor tanks such as air transport lines,...
€57.00 (tax excl.)
€68.97 (tax incl.)
Valves designed for bag filter blowing installations, WITH COMPRESSION FITTING Speed and high flow. Membrane closure. Working pressure 0.5 - 8 bar. Temperature -40 / 80ºC. Aluminum body. Voltages to choose from...
€35.00 (tax excl.)
€42.35 (tax incl.)
A blow-through fitting allows blow-through valves to be connected to the injector tubes through the filter wall in a watertight manner, eliminating the need for welding. Applications: cleaning of bag and cartridge...
€1.00 (tax excl.)
€1.21 (tax incl.)
A DIN-43650-A T-30 coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and a coil of an electromechanical device. The T-30...
€22.00 (tax excl.)
€26.62 (tax incl.)
The NBR blow-off valve membrane replacement is designed to ensure a tight seal and optimal valve functionality, allowing for efficient filter blow-off and expulsion of accumulated particles. Applications: Pneumatic...
Recently Viewed
€32.67 (tax incl.)
€27.00 (tax excl.)
An ATEX blow-off solenoid valve coil . It is used to operate a blow-off solenoid valve in industrial cleaning systems, mainly in dust collectors with bag or cartridge filters in places or environments with a risk of...
€63.09 (tax excl.)
€76.33 (tax incl.)
A guided cylinder with bronze bushings is a double-acting pneumatic actuator designed to provide stable, precise, and durable linear motion. The self-lubricating sintered bronze bushings ensure excellent wear...
€4.49 (tax excl.)
€5.43 (tax incl.)
DIN 2353 L elbow pipe union Operating temperature -20 / 120ºC. Made of drawn steel DIN3859-1. Bichromated coating ISO 4042. Corrosion resistance. Working pressures: Ø 6-8-10-12-15 250 bar Ø 18-22 160 Bar Ø 28-35-42...
€2.63 (tax excl.)
€3.18 (tax incl.)
An ORFS weld-on seat is a hydraulic connection component designed to create an ORFS connection port directly onto a carbon steel structure or pipe by welding. Applications: Construction and agricultural machinery,...
€20.40 (tax excl.)
€24.68 (tax incl.)
A 3/4" Swivel Joint is a component of the Loc-Line® modular hose system designed to provide a pivoting and adjustable connection. Examples of use: Machine tool cooling, Air blowing systems, Adjustable supports....
€0.30 (tax excl.)
€0.36 (tax incl.)
ISO-6432 stem nut Used to securely attach clevis or other accessory to the rod end of an ISO-6432 pneumatic cylinder. Applications: Industrial automation, Agricultural machinery, Medical equipment, Packaging....

Menu

Settings