Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
CENTRAL FEMALE TUBE PRESS INOX
CENTRAL FEMALE TUBE PRESS INOX
CENTRAL FEMALE TUBE PRESS INOX
CENTRAL FEMALE TUBE PRESS INOX

CENTRAL FEMALE TUBE PRESS INOX

A stainless steel press-fit female center pipe tee is distinguished by its female branch connection, unlike the other two ends, which are press-fit. It allows the connection of three pipe sections, with one section diverted from the main flow.

Applications: plumbing, heating, cooling, compressed air systems, gas, drinking water installations, and fluid treatment in residential, commercial, and industrial sectors.

Technical sheet:

  • INOX-316 fitting for pressing.
  • Available tube diameters 15-18-22-28-35-42-54
  • EPDM gasket available (domestic water, heating, fire protection, compressed air (oil-free)
  • VITON gasket available (oils, hydrocarbons (except diesel), solar installations, compressed air.
  • For DVGW GW 541 UNE-EN-10088 tube
  • Pressure 16 bar at 90ºC
  • Temperature 120ºC
  • Various certifications and approvals, depending on the sector.
€9.83 (tax included)
€8.12 (tax excl.)
Tube diameter - Thread
  • Ø 15-1/2
  • Ø 18-1/2
  • Ø 18-3/4
  • Ø 22-1/2
  • Ø 22-3/4
  • Ø 28-3/4
  • Ø 28-1
  • Ø 35-1
  • Ø 35-1-1/4
Reference:
58170039
Description

female central press stainless steel tube

Product Details
58170039
Comments
12 other products in the same category:
VITON FKM GASKET

€0.95 (tax excl.)
€1.15 (tax included)
The Viton FKM gasket is characterized by its exceptional resistance to high temperatures, a wide variety of chemicals and abrasion. Variety of applications: automotive industry, chemical industry, aerospace, food...
STAINLESS STEEL PRESS FEMALE THREAD TUBE UNION

€7.46 (tax excl.)
€9.03 (tax included)
A stainless steel female threaded press pipe union allows sections of pipe to be joined. Applications: drinking water installations, heating and cooling systems, solar applications, compressed air systems,...
3-PIECE PRESS STAINLESS STEEL FITTING

€14.64 (tax excl.)
€17.71 (tax included)
A 3-piece stainless steel press fitting is used in piping systems that require high corrosion resistance and secure connections, especially in sanitary and industrial applications. It facilitates pipe assembly and...
M-H PRESS INOX REDUCTION

€4.13 (tax excl.)
€5.00 (tax included)
An MH press stainless steel reducer is a type of fitting used in piping systems to connect two pipes of different diameters. A larger diameter pipe is always connected to a smaller diameter pipe. Common applications:...
90º H-H CURVE PRESS INOX

€4.39 (tax excl.)
€5.31 (tax included)
A 90º HH press inox bend is a pipe fitting designed to make a 90º turn in a pipe line. Typical applications: Sanitary installations, Heating systems, Food industry, Chemical industry and Naval sector. Technical sheet:...
STAINLESS STEEL FEMALE PRESS ADAPTER

€5.59 (tax excl.)
€6.76 (tax included)
A stainless steel female press adapter is a type of pipe fitting designed to connect a press-fit piping system to another component or system that uses a female threaded connection. Technical sheet: INOX-316 fitting...
45º CURVE H-H PRESS INOX

€4.80 (tax excl.)
€5.81 (tax included)
A 45° HH press stainless steel bend is used to change the direction of the pipe at a 45° angle. Both fitting connections are female threads. Applications: food industry, pharmaceutical industry, chemical industry,...
STAINLESS STEEL PRESS MALE THREAD TUBE UNION

€7.05 (tax excl.)
€8.53 (tax included)
A male threaded stainless steel press pipe union allows two or more pipe elements to be connected. The connection to the smooth pipe is made using a radial press system. Applications: Plumbing and heating...
STAINLESS STEEL PRESS CAP

€4.52 (tax excl.)
€5.47 (tax included)
A stainless steel press plug is used to seal or close the end of a pipe or fitting, made of stainless steel and designed for piping systems that use "push-in" connections. Applications: Food and beverage industry,...
90º FEMALE TUBE ELBOW WITH STAINLESS STEEL PRESS FIXING

€8.38 (tax excl.)
€10.14 (tax included)
A 90º female pipe elbow with stainless steel press fitting allows a 90º turn in the piping system and can be anchored to a surface (wall, floor, etc.) to provide stability to the installation. Technical sheet:...
BATTERY-POWERED ELECTRO-HYDRAULIC PRESS

€1,700.00 (tax excl.)
€2,057.00 (tax included)
A battery-powered electro-hydraulic press uses a hydraulic system driven by an electric motor powered by a rechargeable battery to make joints, usually radial or axial, in pipes and fittings. Applications: Plumbing,...
90º CURVE M-H PRESS INOX

€3.99 (tax excl.)
€4.83 (tax included)
A 90º MH press inox bend is a pipe fitting, especially for installations where high corrosion resistance and a tight seal are required. Its function is to change the direction of fluid flow at a 90º angle....
Recently Viewed
CENTRAL FEMALE TUBE PRESS INOX

€9.83 (tax included)
€8.12 (tax excl.)
A stainless steel press-fit female center pipe tee is distinguished by its female branch connection, unlike the other two ends, which are press-fit. It allows the connection of three pipe sections, with one section...
CNOMO PCN LOW SQUAD

€7.50 (tax excl.)
€9.07 (tax included)
CNOMO PCN low squad It is a metal accessory that is used to fix pneumatic cylinders on structures or supports. Its L-shaped design allows the cylinder to be attached to the mounting surface perpendicularly or at an...
MINI ANTI-VIBRATION MOUNT

€3.94 (tax excl.)
€4.77 (tax included)
The mini anti-vibration mount is designed to isolate mechanical vibrations in smaller or heavier equipment and machinery. Applications: Electronic equipment, Measuring equipment, Household equipment, Light industrial...
MAXI MALE ADAPTER DN-9 ISO 6150 B-15

€2.40 (tax excl.)
€2.90 (tax included)
The ISO 6150 B-15 DN-9 male maxi adapter is used when a hose or pneumatic component with a standard male thread needs to be connected to a quick-connect system of the ISO 6150 B-15 type. The nominal diameter of the...
NG-6 SINGLE OVERCENTER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
The NG-6 simple overcenter valve is used to control the movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since...
PNEUMATIC FILTER BLOWOUT VALVE

€31.42 (tax excl.)
€38.02 (tax included)
The pneumatic filter blow valve is designed for the automatic cleaning of filters by means of compressed air pulses. Applications: industrial filtration systems (such as dust collectors or bag filters) Main features:...

Menu

Please sign in first.

Sign in