Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
45º CURVE H-H PRESS INOX
45º CURVE H-H PRESS INOX
45º CURVE H-H PRESS INOX
45º CURVE H-H PRESS INOX

45º CURVE H-H PRESS INOX

A 45° HH press stainless steel bend is used to change the direction of the pipe at a 45° angle. Both fitting connections are female threads.

Applications: food industry, pharmaceutical industry, chemical industry, drinking water systems and water treatment.

Technical sheet:

  • INOX-316 fitting for pressing.
  • Available tube diameters 15-18-22-28-35-42-54
  • EPDM gasket available (domestic water, heating, fire protection, compressed air (oil-free)
  • VITON gasket available (oils, hydrocarbons (except diesel), solar installations, compressed air.
  • For DVGW GW 541 UNE-EN-10088 tube
  • Pressure 16 bar at 90ºC
  • Temperature 120ºC
  • Various certifications and approvals, depending on the sector.
€5.81 (tax included)
€4.80 (tax excl.)
DIAMETERS
  • Ø 15
  • Ø 18
  • Ø 22
  • Ø 28
  • Ø 35
  • Ø 42
  • Ø 54
Reference:
58040016
Description

45º bend HH press stainless steel

Product Details
58040016
Comments
12 other products in the same category:
90º MALE PRESS STAINLESS STEEL TUBE ELBOW

€8.66 (tax excl.)
€10.48 (tax included)
A 90º male press stainless steel pipe elbow is a pipe fitting that allows the direction of fluid flow to be changed by 90º. This type of elbow is used in a wide variety of applications, including sanitary...
STRAIGHT H-H JOINT

€2.98 (tax excl.)
€3.61 (tax included)
A straight HH union is a connector used in piping systems, designed to join two pipes in a straight line using a press connection system. Technical sheet: INOX-316 fitting for pressing. Available tube diameters...
YOU EQUAL PRESS INOX

€7.05 (tax excl.)
€8.53 (tax included)
A stainless steel equal tee allows the flow of a fluid to be divided into two equal branches. The connection to the pipes is made by pressing, ensuring a tight and durable joint. Typical applications: Sanitary...
BATTERY-POWERED ELECTRO-HYDRAULIC PRESS

€1,700.00 (tax excl.)
€2,057.00 (tax included)
A battery-powered electro-hydraulic press uses a hydraulic system driven by an electric motor powered by a rechargeable battery to make joints, usually radial or axial, in pipes and fittings. Applications: Plumbing,...
STAINLESS STEEL PRESS CAP

€4.52 (tax excl.)
€5.47 (tax included)
A stainless steel press plug is used to seal or close the end of a pipe or fitting, made of stainless steel and designed for piping systems that use "push-in" connections. Applications: Food and beverage industry,...
REDUCED TEA PRESS INOX

€7.99 (tax excl.)
€9.67 (tax included)
A stainless steel press reducing tee is used in piping systems that require high corrosion resistance and secure joints, especially in sanitary and industrial applications. Applications: Food industry, Pharmaceutical...
STAINLESS STEEL PRESS MALE THREAD TUBE UNION

€7.05 (tax excl.)
€8.53 (tax included)
A male threaded stainless steel press pipe union allows two or more pipe elements to be connected. The connection to the smooth pipe is made using a radial press system. Applications: Plumbing and heating...
220V ELECTROHYDRAULIC RADIAL PRESS

€1,400.00 (tax excl.)
€1,694.00 (tax included)
A 220V electrohydraulic radial press is used to make radial joints in pipes and fittings. These joints are achieved by circumferentially compressing a sleeve or ring onto the pipe and fitting. Applications: plumbing,...
EPDM PRESS FITTING GASKET

€0.21 (tax excl.)
€0.25 (tax included)
An EPDM press-fit gasket is a replacement for stainless steel fittings with a press connection. Its function is to create a durable, airtight seal between the fitting and the pipe, preventing fluid or gas leaks....
90º FEMALE TUBE ELBOW PRESS INOX

€7.85 (tax excl.)
€9.50 (tax included)
A 90° female stainless steel press elbow is a fundamental accessory in pipe installations, especially when high corrosion resistance and a tight seal are required. Its function is to change the direction of fluid flow...
PRESSING CLAMP

€159.72 (tax excl.)
€193.26 (tax included)
Pressing jaw It is used to hold and deform work pieces in a precise and controlled manner. Press jaws are used in a wide variety of industries and manufacturing processes including: metalworking, plastics, wood, and...
FLANGE ADAPTER PN-16 DN-15 PRESS INOX

€33.95 (tax excl.)
€41.08 (tax included)
A PN-16 DN-15 press inox flange adapter allows a stainless steel piping system to be connected using a press joining method to another system that uses a flange connection. Technical sheet: INOX-316 fitting for...
Recently Viewed
45º CURVE H-H PRESS INOX

€5.81 (tax included)
€4.80 (tax excl.)
A 45° HH press stainless steel bend is used to change the direction of the pipe at a 45° angle. Both fitting connections are female threads. Applications: food industry, pharmaceutical industry, chemical industry,...
1-1/2" ROLLER CHAIN

€116.06 (tax excl.)
€140.43 (tax included)
1-1/2" Roller Chain Its function is to transmit power and rotary motion between two shafts by means of coupling with toothed pinions. Applications: industrial machinery, vehicles, food industry, construction....
SANITARY BUTTERFLY VALVE CLAMP BS-4835

€180.00 (tax excl.)
€217.80 (tax included)
A CLAMP BS-4835 sanitary butterfly valve is used in most applications involving liquids and solids, and generally for non-obstructive liquids. The design facilitates installation and maintenance, allowing the valve to...
PRESSURE GAUGE WITH STUBBE MEMBRANE SEPARATOR

€166.00 (tax excl.)
€200.86 (tax included)
The Stubbe diaphragm separator pressure gauge is a pressure measuring instrument designed to provide accurate readings by isolating the sensitive internal mechanism of the gauge from direct contact with highly...
ORFS O-RING

€0.70 (tax excl.)
€0.85 (tax included)
An ORFS O-ring is a static sealing element designed for use in ORFS hydraulic connections. It ensures an effective, leak-resistant static seal between the flat faces of the connectors. Technical sheet: O-ring made of...
NG-6 SINGLE OVERCENTER VALVE

€85.00 (tax excl.)
€102.85 (tax included)
The NG-6 simple overcenter valve is used to control the movement and block the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since...

Menu

Please sign in first.

Sign in