Click for more products.
No produts were found.
Click for more products.
No produts were found.

3/2" SOLENOID VALVE CLOSED 1/4" AC02

3/2 N. closed solenoid valve 1/4" AC02

Technical sheet:

  • 1/4" direct control solenoid valve.
  • No differential pressure is required for proper operation.
  • Mounting position indifferent.
  • It is possible to change the coil without having to disassemble the valve.
  • Various sealing joints depending on the fluid used.
  • Applications: Compressed air, inert gases, diesel, steam, vacuum and in general all fluids compatible with the available sealing gaskets.
  • Maximum viscosity allowed: 5º Engler.
  • C3 type mounting coil (not included)
€37.50 (tax included)
€30.99 (tax excl.)
Reference:
6029
Description

3/2 N. closed solenoid valve 1/4" AC02

ELEC.VALVULA 32 N.CERRADA 14 AC02

Product Details
6029
Comments
Related products
€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
€6.00 (tax excl.)
€7.26 (tax included)
The DIN-43650-A LED T-30 Connector is an electrical component designed for the fast and safe connection of cables in industrial and commercial applications. Applications: Machine control systems, outdoor lighting,...
€8.80 (tax excl.)
€10.65 (tax included)
A C3 8W solenoid coil is the essential electromagnetic component that activates a solenoid valve mechanism, allowing or stopping the flow of fluid (liquid or gas) in a system. 8W indicates the power consumption....
12 other products in the same category:
€14.07 (tax excl.)
€17.02 (tax included)
A 2/2 normally closed (N.C.) solenoid valve, 1/8" AL01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" air line in...
€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
€21.72 (tax excl.)
€26.28 (tax included)
A 2/2 N. open solenoid valve, 1/8" AN01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" diameter air passage when it...
€23.11 (tax excl.)
€27.96 (tax included)
The 2/2 N.closed 1/4" AL02 solenoid valve is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter duct. The valve has 2 ways (inlet and outlet) and 2 positions (open and...
€30.99 (tax excl.)
€37.50 (tax included)
The AC02 3/2 N. open solenoid valve (1/4") allows you to control the flow of compressed air, permitting or blocking its passage through three ports, one of which is 1/4" in diameter. It has 3 ports and 2 positions....
€20.90 (tax excl.)
€25.29 (tax included)
The AC09 3/2 N. open solenoid valve (1/8") allows you to control the flow of compressed air by permitting or blocking its passage through three ports, one of which has a 1/8" diameter. The valve has 3 ports and 2...
€4.14 (tax excl.)
€5.01 (tax included)
A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...
€22.00 (tax excl.)
€26.62 (tax included)
A 2/2 N. open linear flow AN11 solenoid valve is a pneumatic component used in industrial automation systems to control compressed air flow. The valve has two ports (inlet and outlet) and two positions (open and...
€46.35 (tax excl.)
€56.08 (tax included)
2/2 N. normally closed solenoid valve, stainless steel, direct control A 2/2 N. normally closed stainless steel direct acting solenoid valve is an electromechanical control device designed to open or close the passage...
€12.85 (tax excl.)
€15.55 (tax included)
A C4 solenoid valve coil is used to actuate directional valves in pneumatic and hydraulic systems. Applications: Automation machinery, Process control systems, HVAC and Refrigeration, Mobile equipment, Automated...
Recently Viewed
€37.50 (tax included)
€30.99 (tax excl.)
3/2 N. closed solenoid valve 1/4" AC02 Technical sheet: 1/4" direct control solenoid valve. No differential pressure is required for proper operation. Mounting position indifferent. It is possible to change the coil...
€80.81 (tax excl.)
€97.78 (tax included)
pneumatically actuated linear flow buffer valve Its compact design allows for reduced dimensions. Full range from 3/8" to 2 1/2" and in DOUBLE EFFECT. Possibility of incorporating an external indicator (sensor)...
€354.00 (tax excl.)
€428.34 (tax included)
Hydac membrane accumulator to achieve energy storage. Technical information: Volume 2.8 liters. Membrane made of NBR. Equipped with a lockable safety block and complies with the pressure equipment regulations and...
€11.92 (tax excl.)
€14.42 (tax included)
The EN-1092-1-13B stainless steel threaded flange is used in piping systems to join pipe sections, valves, pumps, and other equipment using bolts and gaskets. It features an internal thread, allowing it to be...
€3.39 (tax excl.)
€4.11 (tax included)
The F male camlock fitting, male NPT thread, is used for quick and easy connection of two flexible cables or one cable to a machine connection. It has the male camlock end on one end, and a BSP female end on the...
€13.00 (tax excl.)
€15.73 (tax included)
The CRHL high-pressure stainless steel plug adapter is a pneumatic or hydraulic component designed to connect different types of connectors or hoses in systems operating at high pressures. Its smooth surface...

Menu