Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
SOLENOID VALVE 2/2 NO. OPEN 1/8" AN01

SOLENOID VALVE 2/2 NO. OPEN 1/8" AN01

A 2/2 N. open solenoid valve, 1/8" AN01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" diameter air passage when it receives an electrical signal. The valve is normally open, meaning that airflow continues until an electrical signal is applied to close it.

Technical specifications:

  • Direct control solenoid valve
  • Differential pressure is not required for its proper functioning.
  • Mounting position is irrelevant.
  • It is possible to change the coil without removing the valve.
  • Various sealing gaskets depending on the fluid used.
  • Applications: Compressed air, inert gases, diesel, steam, vacuum and in general all fluids compatible with the available sealing gaskets.
  • Maximum permissible viscosity: 5º Engler.
  • C1 type connection coil NOT INCLUDED
€26.28 (tax included)
€21.72 (tax excl.)
Reference:
6023
Description

Solenoid valve 2/2 N. open 1/8" AN01

ELEC.VALVULA 22 N.ABIERTA 18 AN01

Product Details
6023
Comments
Related products
T-22 COIL CONNECTOR DIN-43650-B T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
SOLENOID VALVE COIL C1 SOLENOID VALVE COIL C1

€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
12 other products in the same category:
SOLENOID VALVE 2/2 NO. OPEN 1/4" AN02

€35.15 (tax excl.)
€42.53 (tax included)
A 2/2 N. open solenoid valve, 1/4" AN20, is used to control the flow of compressed air, allowing or blocking its passage through a 1/4" diameter conduit. The valve has two ports (inlet and outlet) and two positions...
T-22 AC/DC LED CONNECTOR

€4.14 (tax excl.)
€5.01 (tax included)
A T-22 AC/DC LED Connector is used to connect and power LED circuits. It is compatible with both alternating and direct current. It is used in a wide variety of applications including industrial lighting, signage,...
SOLENOID VALVE COIL C1

€7.51 (tax excl.)
€9.09 (tax included)
A solenoid valve coil C1 is a fundamental electromechanical component in pneumatic and hydraulic systems. It enables the flow of a fluid (air, oil, water, etc.) to be activated or deactivated through a valve,...
2/2 N.OPEN SOLENOID VALVE LINEAR BORE AN11

€22.00 (tax excl.)
€26.62 (tax included)
A 2/2 N. open linear flow AN11 solenoid valve is a pneumatic component used in industrial automation systems to control compressed air flow. The valve has two ports (inlet and outlet) and two positions (open and...
T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
T-30 COIL CONNECTOR DIN-43650-A

€1.00 (tax excl.)
€1.21 (tax included)
A T-30 DIN-43650-A coil connector is an industrial electrical connector designed to establish a safe and reliable connection between a power or control source and the coil of an electromechanical device. The T-30...
3/2 N.OPEN SOLENOID VALVE INOX 1/8" 1/4" DIRECT CONTROL

€56.25 (tax excl.)
€68.06 (tax included)
A 3/2 N.open stainless steel 1/8" 1/4" direct control solenoid valve is used in systems that control the flow of liquids or gases to direct the passage of a fluid. Applications: Industrial automation, Food and...
2/2 NO. OPEN SOLENOID VALVE STAINLESS STEEL DIRECT ACTION

€58.60 (tax excl.)
€70.91 (tax included)
INOX-304 Solenoid Valve Normally Open. Size from 1/8" to 1/2" It comes with a coil and connector. Available in high pressure and NPT thread. IP-65 protection Operating temperature -20ºC / 80ºC Viscosity limit 20 cST....
3/2" SOLENOID VALVE CLOSED 1/4" STAINLESS STEEL DIRECT CONTROL

€64.00 (tax excl.)
€77.44 (tax included)
A 3/2 N. closed 1/4" stainless steel direct control solenoid valve is an electromagnetic valve designed to control the flow of a fluid (typically compressed air) in low flow pneumatic or hydraulic systems....
SOLENOID VALVE 2/2 N.CLOSED 1/8" AL01

€14.07 (tax excl.)
€17.02 (tax included)
A 2/2 normally closed (N.C.) solenoid valve, 1/8" AL01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" air line in...
3/2 NO. OPEN SOLENOID VALVE 1/4" AC02

€30.99 (tax excl.)
€37.50 (tax included)
The AC02 3/2 N. open solenoid valve (1/4") allows you to control the flow of compressed air, permitting or blocking its passage through three ports, one of which is 1/4" in diameter. It has 3 ports and 2 positions....
Recently Viewed
SOLENOID VALVE 2/2 NO. OPEN 1/8" AN01

€26.28 (tax included)
€21.72 (tax excl.)
A 2/2 N. open solenoid valve, 1/8" AN01, is a pneumatic component used in industrial automation systems to control the flow of compressed air. Its function is to open or close a 1/8" diameter air passage when it...
2/2 NC MIXED CONTROL SOLENOID VALVE AL24

€46.86 (tax excl.)
€56.70 (tax included)
Combined control solenoid valve. No differential pressure is required for correct operation. P min. = 0 This solenoid valve solves the problem of opening and closing fluids when the pressure is low or zero. Mounting...
GUILLEMIN WELDABLE CLOSURE
Reduced price

€25.39 (tax excl.)
€30.72 (tax included)
A weld-on guillemin fitting is a type of symmetrical quick-connect fitting that complies with the French standard NF E 29-572 and the European standard EN 14420-8. It is used for quickly connecting and disconnecting...
STAINLESS STEEL HOSES

We manufacture custom stainless steel hoses , as well as all types of special couplings and terminals. We offer a range of standard fittings (male threads, female threads, flanges, camlocks, etc.), welded using a TIG...
VACUUM GAUGE Ø40 CENTRAL THREAD 1/8"

€3.52 (tax excl.)
€4.26 (tax included)
A Ø40 center thread 1/8" vacuum gauge is a pressure measuring instrument specifically designed to indicate negative pressure (vacuum) in a system. Applications: Pneumatic vacuum systems, Packaging machinery,...
10" WATER FILTER

€20.00 (tax excl.)
€24.20 (tax included)
A 10" water filter is designed to remove impurities and improve water quality. Its distinguishing feature is its standardized 10-inch length. Applications: Residential Points of Entry (POE), Points of Use (POU),...

Menu

Please sign in first.

Sign in