Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
OSCILLATING SIDE HINGE
OSCILLATING SIDE HINGE
OSCILLATING SIDE HINGE
OSCILLATING SIDE HINGE

OSCILLATING SIDE HINGE

A swing-out hinge is a mechanical component designed to allow a door, hatch, or cover to swing about a pivot point or lateral axis. It allows limited, controlled movement in an arc around a lateral fixing point.

Applications: Industrial machinery, Automation equipment, Special vehicles, Electrical or control cabinets, Agricultural industry

Technical sheet:

  • Swing hinge.
  • Front or rear mounting.
  • Made of steel.
€124.82 (tax included)
€103.16 (tax excl.)
DIAMETERS
  • Ø 32
  • Ø 40
  • Ø 50
  • Ø 63
  • Ø 80
  • Ø 100
  • Ø 125
Reference:
53380031
Description

swinging side hinge

CHARNELA LATERAL OSCILANTE

Product Details
53380031
Comments
12 other products in the same category:
FRONT REAR PLATE

€3.00 (tax excl.)
€3.62 (tax included)
A front-rear plate for ISO-6432 MF8 cylinder is a mounting accessory for fixing an ISO 6432 round pneumatic cylinder to a flat surface, either from its front or rear. Applications: Automation Machinery, Clamping and...
PIN FOR SWING FIXTURES

€2.06 (tax excl.)
€2.49 (tax included)
Pin for oscillating fixings A pivot pin is a mechanical component designed to act as an axle in joints that allow one part to pivot relative to another. It is essential in applications requiring a movable and...
STRAIGHT BALL JOINT ISO 15552

€25.42 (tax excl.)
€30.76 (tax included)
Coupling for joining cylinder rods and machine components. It allows radial and angular deviations ensuring the longevity and smoothness of operation of the elements joined by the self-aligning joint. Construction of...
CNOMO CENTER SWING FLANGE

€50.23 (tax excl.)
€60.78 (tax included)
A CNOMO center pivot flange is a mounting accessory that allows a CNOMO pneumatic cylinder to be attached to a structure or machine so that it can pivot or tilt around a center point. Applications: Automotive...
BALL JOINT STEM ISO-6432

€5.98 (tax excl.)
€7.24 (tax included)
ISO-6432 rod end It is a mechanical component specifically designed to connect the rod of an ISO-6432 pneumatic cylinder to other elements of a machine or system. Its main function is to allow angular movement of the...
CNOMO STEM NUT

€1.90 (tax excl.)
€2.30 (tax included)
A CNOMO rod nut is a fastener specifically designed for pneumatic or hydraulic cylinders that comply with the CNOMO standard. Its function is to secure the piston rod to the cylinder or to an external connecting...
STEM NUT ISO-6432

€0.30 (tax excl.)
€0.36 (tax included)
ISO-6432 stem nut Used to securely attach clevis or other accessory to the rod end of an ISO-6432 pneumatic cylinder. Applications: Industrial automation, Agricultural machinery, Medical equipment, Packaging....
FEMALE HINGE CNOMO PCN

€15.25 (tax excl.)
€18.45 (tax included)
A CNOMO PCN female hinge allows the cylinder to be attached to a machine or structure, providing a pivot point that allows linear movement of the cylinder rod. Typical applications include industrial automation,...
FIXING FOR ISO-6432 GUIDE

€12.12 (tax excl.)
€14.66 (tax included)
An ISO-6432 guide bracket is used to mount an external guide unit directly onto an ISO 6432 pneumatic cylinder. Its purpose is to create a robust and aligned connection between the cylinder and the guide system,...
CNOMO PCN FLAT FLANGE

€21.00 (tax excl.)
€25.41 (tax included)
A CNOMO PCN flat flange is a fastener or bracket used to securely mount a pneumatic cylinder to a structure or machine, where the cylinder meets the CNOMO PCN standard. The flat flange, meaning it attaches directly to...
ANCHOR FOR INTERMEDIATE HINGE

€69.19 (tax excl.)
€83.72 (tax included)
The intermediate hinge bracket is a mounting accessory designed to secure pneumatic cylinders, allowing controlled oscillating movement during operation. It is installed in the center of the cylinder body and acts as...
REAR FIXING SWINGING BALL JOINT ALUMINUM

€43.48 (tax excl.)
€52.61 (tax included)
Rear swing arm aluminium ball joint It is used to connect the end of a pneumatic cylinder to a structure or support, allowing angular movement. It is fixed to the pneumatic cylinder by means of a threaded connection...
Recently Viewed
OSCILLATING SIDE HINGE

€124.82 (tax included)
€103.16 (tax excl.)
A swing-out hinge is a mechanical component designed to allow a door, hatch, or cover to swing about a pivot point or lateral axis. It allows limited, controlled movement in an arc around a lateral fixing point....
NG-10 LOWER BASE PLATE

€82.00 (tax excl.)
€99.22 (tax included)
A lower NG-10 base plate serves as a mounting and connection point for solenoid valves and other hydraulic components that comply with the NG-10 (CETOP 5) standard. Connection ports for hydraulic lines are located on...
ISO I PNEUMATIC PILOT DISTRIBUTOR

€77.35 (tax excl.)
€93.59 (tax included)
An ISO I pneumatic pilot distributor is used to control the flow and direction of compressed air in pneumatic systems, allowing the operation of cylinders and other actuators. Applications: Industrial automation,...
BLOW-IN PULL-IN

€35.00 (tax excl.)
€42.35 (tax included)
A blow-through fitting allows blow-through valves to be connected to the injector tubes through the filter wall in a watertight manner, eliminating the need for welding. Applications: cleaning of bag and cartridge...
5/16" SINGLE-SIDED DISTRIBUTION STRIP

€6.26 (tax excl.)
€7.57 (tax included)
The 5/16" single-sided distribution strip is designed to distribute fluid from a single inlet to multiple outlets, facilitating the organization and centralization of connections in hydraulic or lubrication systems....
L BULKHEAD NUT

€0.44 (tax excl.)
€0.53 (tax included)
An L bulkhead nut is used to secure a fitting, pipe, or threaded connector through the wall of a panel, tank, or equipment. Applications: Pneumatic and hydraulic systems, Machinery manufacturing, Tanks and containers,...

Menu

Please sign in first.

Sign in