Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
GR1 GEAR FLOW DIVIDER
GR1 GEAR FLOW DIVIDER
GR1 GEAR FLOW DIVIDER
GR1 GEAR FLOW DIVIDER

GR1 GEAR FLOW DIVIDER

GR1 Gear Flow Divider

A GR1 two-body gear flow divider splits a unidirectional flow into two proportional flows, using two gear bodies that rotate at the same speed on a single shaft. Ideal for synchronizing the speed of two identical cylinders.

Main features:

  • 1/2" Inlet 3/8" Outlets
  • Maximum speed 3000 rpm.
  • Maximum pressure 220 bar
  • Selection options between 1.2 and 9.5 cm³
  • It incorporates a compensation valve.
€592.90 (tax included)
€490.00 (tax excl.)
OUTPUT TYPE
  • 2 OUTPUTS
  • 4 OUTPUTS
CAUDAL
  • 1.2 cc/rev
  • 1.7 cc/rev
  • 2.3 cc/rev
  • 2.7cc/rev
  • 3.2cc/rev
  • 3.8 cc/rev
  • 4.3 cc/rev
  • 5 cc/rev
  • 6.3 cc/rev
  • 7.8 cc/rev
  • 9.5 cc/rev
Reference:
4938100
Description

GR1 Gear Flow Divider

A GR1 two-body gear flow divider is a hydraulic component designed to divide the flow of a fluid into two equal or proportional outlets , using two mechanically coupled gear sections (bodies). This type of divider ensures precise flow distribution , regardless of pressure variations at each outlet.

Common applications

  • Synchronization of hydraulic cylinders.
  • Industrial and mobile machinery.
  • Lifting systems, presses, platforms and simultaneous movement equipment.
  • Hydraulic circuits where uniform flow distribution is required.

Technical specifications of a GR1 gear flow divider:

Product Details
4938100
Comments
Related products
GR1 THREADED HYDRAULIC GEAR PUMP GR1 THREADED HYDRAULIC GEAR PUMP

€49.90 (tax excl.)
€60.38 (tax included)
The GR1 threaded hydraulic gear pump is used for pumping oil into pressure in a closed circuit. The pump is designed to be threaded, making it easy to install and maintain. Applications: industrial hydraulic systems,...
12 other products in the same category:
GR3 HYDRAULIC GEAR PUMP WITH FLANGE

€105.44 (tax excl.)
€127.58 (tax included)
A GR3 flanged hydraulic gear pump uses two gears to propel fluid. As the gears rotate, fluid is pumped between them, increasing its pressure. They are used in a wide range of applications, including industrial...
ELECTRIC CLUTCH

€550.00 (tax excl.)
€665.50 (tax included)
The electric clutch for mounting on a hydraulic pump is used to automatically connect and disconnect the pump using an electrical signal. It can be installed on GR-1 and GR-2 pumps. Available in 12VDC and 24VDC...
GR2 HYDRAULIC GEAR PUMP WITH FLANGE

€65.34 (tax excl.)
€79.06 (tax included)
A GR2 flanged hydraulic gear pump uses two gears to continuously drive the flow of fluid. It is designed to be mounted to a surface using a flange, allowing it to be connected to pipes or other hydraulic system...
SPEED MULTIPLIER FEMALE TRACTOR TAKE

€66.00 (tax excl.)
€79.86 (tax included)
The female tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier works to connect the high-pressure hydraulic pump to the tractor's...
GR1 HYDRAULIC GEAR PUMP WITH FLANGE

€49.98 (tax excl.)
€60.48 (tax included)
The GR1 flanged hydraulic gear pump is designed with a flange, which is a plate with bolt holes, making it easy to mount in a hydraulic system and connect to pipes, valves, or other hydraulic system components. It is...
GR1 THREADED HYDRAULIC GEAR PUMP

€49.90 (tax excl.)
€60.38 (tax included)
The GR1 threaded hydraulic gear pump is used for pumping oil into pressure in a closed circuit. The pump is designed to be threaded, making it easy to install and maintain. Applications: industrial hydraulic systems,...
GR3 THREADED HYDRAULIC GEAR PUMP

€105.44 (tax excl.)
€127.58 (tax included)
A GR3 threaded hydraulic gear pump transforms the rotary motion produced by a motor into flow/pressure through oil. They allow for efficient pump control, as the pumping rate is proportional to the pump's rotational...
STRAIGHT FLANGE FOR RFI EXTENDED PUMP

€17.82 (tax excl.)
€21.56 (tax included)
The RFI Extended Pump Straight Flange is used to safely and efficiently connect an RFI hydraulic pump to a piping system. The flange has a straight shape and is longer than a standard flange, allowing for greater...
HYDRAULIC OIL MOTOR PUMP 24VDC 3KW

€880.00 (tax excl.)
€1,064.80 (tax included)
A 24VDC 3KW oil-hydraulic motor pump is a combination of a 24-volt direct current (VDC) electric motor with a hydraulic pump to generate a high-pressure oil flow. Applications requiring precise motion and control,...
SPEED MULTIPLIER TRACTOR SOCKET QUICK PLUG

€96.00 (tax excl.)
€116.16 (tax included)
The tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier connects the high-pressure hydraulic pump to the tractor's PTO. This model...
SPEED MULTIPLIER TRACTOR MALE TAKE

€66.00 (tax excl.)
€79.86 (tax included)
The tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier works to connect the high-pressure hydraulic pump to the tractor's PTO. It is...
MANUAL HYDRAULIC PUMP

€101.13 (tax excl.)
€122.37 (tax included)
A hand hydraulic pump makes operating any hydraulic system easier. It uses human power to convert mechanical energy into hydraulic energy. They are relatively simple to operate and maintain, making them an economical...
Recently Viewed
GR1 GEAR FLOW DIVIDER

€592.90 (tax included)
€490.00 (tax excl.)
GR1 Gear Flow Divider A GR1 two-body gear flow divider splits a unidirectional flow into two proportional flows, using two gear bodies that rotate at the same speed on a single shaft. Ideal for synchronizing the speed...
STRAIGHT FLANGE FOR RF PUMP

€12.48 (tax excl.)
€15.10 (tax included)
A straight RF pump flange connects an RF hydraulic pump to a piping system. The flange is straight and is installed perpendicular to the pump surface. Unlike elbow flanges, this flange is straight. Applications:...
220V ELECTROHYDRAULIC RADIAL PRESS

€1,400.00 (tax excl.)
€1,694.00 (tax included)
A 220V electrohydraulic radial press is used to make radial joints in pipes and fittings. These joints are achieved by circumferentially compressing a sleeve or ring onto the pipe and fitting. Applications: plumbing,...
BUTTON SILENCER

€0.78 (tax excl.)
€0.94 (tax included)
Button mute It is a pneumatic component designed to reduce the noise generated by the escape of compressed air in a pneumatic system. It is installed in-line in the pneumatic circuit, usually at the outlet of the...
ELASTIC COUPLING GR-1

€15.14 (tax excl.)
€18.32 (tax included)
The GR-1 elastic coupling is a coupling system for connecting pairs of shafts. It connects two shafts, allowing power transmission between them and absorbing vibrations, misalignments, and shocks. Its design...
3/4" SPROCKET

€10.22 (tax excl.)
€12.37 (tax included)
3/4" pinion Technical sheet: Standard toothed pinion made of F-114 steel, blued, black. Dimensions and finish according to DIN-8187 ISO R606 standard They are served with a through hole. Possibility of selecting...

Menu

Please sign in first.

Sign in