24VDC 3KW Oil-hydraulic Motor Pump | Buy Online

HYDRAULIC OIL MOTOR PUMP 24VDC 3KW

A 24VDC 3KW oil-hydraulic motor pump is a combination of a 24-volt direct current (VDC) electric motor with a hydraulic pump to generate a high-pressure oil flow.

Applications requiring precise motion and control, such as electric vehicles, industrial machinery, agricultural equipment, marine applications, renewable energy, etc.

Technical sheet:

Power 3000 W
Engine speed 2000 rpm
IP-23 protection
Ventilated electric motor.
Engine diameter 151 mm
Incorporates GR-2 11.3 cc hydraulic pump for flange.
Support with legs for fixing.

If you need help choosing the right 24VDC 3KW oil-hydraulic pump for your application, please don't hesitate to contact us.

STRAIGHT FLANGE FOR RF PUMP

€12.48 (tax excl.)

€15.10 (tax incl.)

A straight RF pump flange connects an RF hydraulic pump to a piping system. The flange is straight and is installed perpendicular to the pump surface. Unlike elbow flanges, this flange is straight. Applications:...

ANGLED FLANGE FOR RG PUMP

€6.37 (tax excl.)

€7.71 (tax incl.)

An RG pump elbow flange is used to connect an RG hydraulic pump to a piping system. It can be useful in applications where space is limited or where the pump needs to be installed in a specific position. This flange...

8 other products in the same category:

GR3 THREADED HYDRAULIC GEAR PUMP

€105.44 (tax excl.)

€127.58 (tax incl.)

A GR3 threaded hydraulic gear pump transforms the rotary motion produced by a motor into flow/pressure through oil. They allow for efficient pump control, as the pumping rate is proportional to the pump's rotational...

GR3 HYDRAULIC GEAR PUMP WITH FLANGE

€105.44 (tax excl.)

€127.58 (tax incl.)

A GR3 flanged hydraulic gear pump uses two gears to propel fluid. As the gears rotate, fluid is pumped between them, increasing its pressure. They are used in a wide range of applications, including industrial...

SPEED MULTIPLIER TRACTOR MALE TAKE

€66.00 (tax excl.)

€79.86 (tax incl.)

The tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier works to connect the high-pressure hydraulic pump to the tractor's PTO. It is...

MANUAL HYDRAULIC PUMP

€101.13 (tax excl.)

€122.37 (tax incl.)

A hand hydraulic pump makes operating any hydraulic system easier. It uses human power to convert mechanical energy into hydraulic energy. They are relatively simple to operate and maintain, making them an economical...

PUMP TO MULTIPLIER ADAPTER SLEEVE

€6.60 (tax excl.)

€7.99 (tax incl.)

The pump to speed multiplier adapter sleeve It is coupled to the pump shaft, and the pinion to the speed multiplier shaft. The rotation of the pinion rotates the sleeve, which transmits the pump's power to the speed...

STRAIGHT FLANGE FOR RF PUMP

€12.48 (tax excl.)

€15.10 (tax incl.)

GR2 THREADED HYDRAULIC GEAR PUMP

€65.34 (tax excl.)

€79.06 (tax incl.)

The GR-2 threaded hydraulic gear pump is used for pumping oil to be converted into pressure in a sealed circuit. Being small in size, it is ideal for applications where space is limited. The GR-2 pump can be used in a...

SPEED MULTIPLIER TRACTOR SOCKET QUICK PLUG

€96.00 (tax excl.)

€116.16 (tax incl.)

The tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier connects the high-pressure hydraulic pump to the tractor's PTO. This model...