Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
GR2 THREADED HYDRAULIC GEAR PUMP
GR2 THREADED HYDRAULIC GEAR PUMP
GR2 THREADED HYDRAULIC GEAR PUMP
GR2 THREADED HYDRAULIC GEAR PUMP

GR2 THREADED HYDRAULIC GEAR PUMP

Threaded GR-2 gear pump. Used for pumping oil that will be converted into pressure in a sealed circuit.

  • Shaft taper 1:8
  • 1/2" threaded outlet/1/2" or 3/4" threaded suction
  • Temperature -10ºC / 80ºC
  • Right axis.

SEE OTHER OPTIONS AND CONFIGURATIONS

Buy online GR2 THREADED HYDRAULIC GEAR PUMP at the best price

€79.06 (tax incl.)
€65.34 (tax excl.)
FLOW
Reference:
48070020
Consult price for large quantities
Related products
PUMP TO MULTIPLIER ADAPTER SLEEVE PUMP TO MULTIPLIER ADAPTER SLEEVE

€7.99 (tax incl.)
€6.60 (tax excl.)
Sleeve or pinion to adapt a pump to a speed multiplier. Made of black blued F-114 steel It has the machining for the keyway incorporated Taper 1:8 Pinion insert according to DIN-5482 Check other settings
GR-2 COUPLING HOOD GR-2 COUPLING HOOD

€17.85 (tax incl.)
€14.75 (tax excl.)
GR-2 coupling bell Made of aluminum. According to European standard.
GR-2 ELASTIC COUPLING GR-2 ELASTIC COUPLING

€32.49 (tax incl.)
€26.85 (tax excl.)
The GR-2 full elastic coupling is a union system between pairs of shafts. They serve to transmit rotational movement and compensate for misalignments between axles and absorb vibrations that may occur between them....
Description

Product Details
48070020
Reference FLOW Price Add to cart
48070020 4 cc/rev
€65.34
48070021 6 cc/rev
€65.34
48070022 8 cc/rev
€65.34
48070023 10 cc/rev
€65.34
48070024 12 cc/rev
€65.34
48070025 14 cc/rev
€65.34
48070026 16 cc/rev
€65.34
48070027 18 cc/rev
€65.34
48070028 20 cc/rev
€68.31
48070029 23 cc/rev
€68.31
48070030 25 cc/rev
€68.31
48070031 28 cc/rev
€68.31
48070032 30 cc/rev
€68.31
12 other products in the same category:
STRAIGHT FLANGE FOR RFI EXTENDED PUMP STRAIGHT FLANGE FOR RFI EXTENDED PUMP

€17.97 (tax incl.)
€14.85 (tax excl.)
Extended straight flange for pump Made of steel Thread according to ISO-1179-1 Supplied with 4 screws and O-ring. Pressure 250 bar. The size refers to the center-to-center distance of the screws.
MANUAL HYDRAULIC PUMP MANUAL HYDRAULIC PUMP

€111.25 (tax incl.)
€91.94 (tax excl.)
The manual hydraulic pump facilitates the operation of any hydraulic system, with an adequate cost and the necessary efficiency. It is served with a lever. Possibility of choosing different tanks and flow rates. In...
GR3 THREADED HYDRAULIC GEAR PUMP GR3 THREADED HYDRAULIC GEAR PUMP

€127.58 (tax incl.)
€105.44 (tax excl.)
A hydraulic pump transforms a rotary movement produced by a motor and transforms it into flow/pressure through oil. They allow effective control of pumping since the pumping flow rate is proportional to the rotation...
GR1 HYDRAULIC GEAR PUMP FLANGE GR1 HYDRAULIC GEAR PUMP FLANGE

€60.48 (tax incl.)
€49.98 (tax excl.)
GR-1 gear pump for mounting flange Shaft taper 1:8 Inlet and outlet to be mounted with European flange Temperature -10ºC / 80ºC Right axis. * Check other options and settings * Buy HYDRAULIC GEAR PUMP GR1 flange...
ELBOW FLANGE FOR RGB PUMP ELBOW FLANGE FOR RGB PUMP

€15.14 (tax incl.)
€12.51 (tax excl.)
90º angled flange for RGB pump Made of steel Thread according to ISO-1179-1 Supplied with 4 screws and O-ring. Pressure 315 bar. The size refers to the center-to-center distance of the screws.
ELBOW FLANGE FOR RG PUMP ELBOW FLANGE FOR RG PUMP

€6.43 (tax incl.)
€5.31 (tax excl.)
90º flange for RG pump Made of steel Pressure 315 bar Supplied with screws and O-ring Thread according to ISO-1179-1 The size refers to the center-to-center distance of the screws.
MOTOR PUMP 24V DC 3KW MOTOR PUMP 24V DC 3KW

€1,064.80 (tax incl.)
€880.00 (tax excl.)
Oil-hydraulic motor pump with 24VDC motor Power 3000 W Engine speed 2000 rpm Protection IP-23 Ventilated electric motor. Motor diameter 151 mm Includes GR-2 11.3 cc hydraulic pump with flange. Support with legs for...
GR2 FLANGE HYDRAULIC GEAR PUMP GR2 FLANGE HYDRAULIC GEAR PUMP

€79.06 (tax incl.)
€65.34 (tax excl.)
GR-2 Flange Mount Gear Pump Shaft taper 1:8 Inlet and outlet to mount European flange. Temperature -10ºC / 80ºC Right axis. SEE OTHER OPTIONS AND CONFIGURATIONS
GR1 THREADED HYDRAULIC GEAR PUMP GR1 THREADED HYDRAULIC GEAR PUMP

€60.38 (tax incl.)
€49.90 (tax excl.)
Threaded GR-1 gear pump. Used to pump oil that will be converted into pressure, in a closed circuit. Shaft taper 1:8 3/8" threaded outlet and suction Temperature -10ºC / 80ºC Right turn. SEE OTHER OPTIONS AND...
PUMP TO MULTIPLIER ADAPTER SLEEVE PUMP TO MULTIPLIER ADAPTER SLEEVE

€7.99 (tax incl.)
€6.60 (tax excl.)
Sleeve or pinion to adapt a pump to a speed multiplier. Made of black blued F-114 steel It has the machining for the keyway incorporated Taper 1:8 Pinion insert according to DIN-5482 Check other settings
STRAIGHT FLANGE FOR RF PUMP STRAIGHT FLANGE FOR RF PUMP

€12.58 (tax incl.)
€10.40 (tax excl.)
Straight pump flange Made of steel Supplied with screws and O-ring. Pressure 250 bar. The size refers to the center-to-center distance of the screws.
TRACTOR SOCKET MULTIPLIER QUICK PLUG TRACTOR SOCKET MULTIPLIER QUICK PLUG

€116.16 (tax incl.)
€96.00 (tax excl.)
The speed multiplier for tractor power take-off is a mechanism used to adapt the power and speed generated by an engine. Therefore, a power take-off speed multiplier works to link the high-pressure hydraulic pump with...

Menu

Please sign in first.

Sign in