Click for more products.
No produts were found.
Click for more products.
No produts were found.

GR2 HYDRAULIC GEAR PUMP WITH FLANGE

A GR2 flanged hydraulic gear pump uses two gears to continuously drive the flow of fluid. It is designed to be mounted to a surface using a flange, allowing it to be connected to pipes or other hydraulic system components. It is a fundamental component of hydraulic systems, as it generates the pressure necessary to operate hydraulic components such as cylinders, motors, and valves. It is available in a variety of sizes and capacities.

Technical sheet:

  • Taper axis 1:8
  • Inlet and outlet for mounting European flange.
  • Temperature -10ºC / 80ºC
  • Right axis.

CHECK OTHER OPTIONS AND CONFIGURATIONS

€79.06 (tax included)
€65.34 (tax excl.)
CAUDAL
  • 4 cc/rev
  • 6 cc/rev
  • 8 cc/rev
  • 10 cc/rev
  • 12 cc/rev
  • 14 cc/rev
  • 16 cc/rev
  • 18 cc/rev
  • 20 cc/rev
  • 23 cc/rev
  • 25 cc/rev
  • 30 cc/rev
Reference:
48080025
Description

GR2 hydraulic gear pump with flange

Product Details
48080025
Comments
Related products
€12.48 (tax excl.)
€15.10 (tax included)
A straight RF pump flange connects an RF hydraulic pump to a piping system. The flange is straight and is installed perpendicular to the pump surface. Unlike elbow flanges, this flange is straight. Applications:...
€17.82 (tax excl.)
€21.56 (tax included)
The RFI Extended Pump Straight Flange is used to safely and efficiently connect an RFI hydraulic pump to a piping system. The flange has a straight shape and is longer than a standard flange, allowing for greater...
€15.01 (tax excl.)
€18.16 (tax included)
The RGB pump elbow flange is used to connect an RGB hydraulic pump to other components of a hydraulic system. This can be useful in applications where space is limited or where the pump needs to be installed in a...
€6.37 (tax excl.)
€7.71 (tax included)
An RG pump elbow flange is used to connect an RG hydraulic pump to a piping system. It can be useful in applications where space is limited or where the pump needs to be installed in a specific position. This flange...
€26.85 (tax excl.)
€32.49 (tax included)
A GR-2 elastic coupling is a coupling system for connecting pairs of shafts. It serves to transmit rotational motion and compensate for misalignment between shafts and absorb vibrations that may occur between them. It...
12 other products in the same category:
€96.00 (tax excl.)
€116.16 (tax included)
The tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier connects the high-pressure hydraulic pump to the tractor's PTO. This model...
€66.00 (tax excl.)
€79.86 (tax included)
The female tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier works to connect the high-pressure hydraulic pump to the tractor's...
€105.44 (tax excl.)
€127.58 (tax included)
A GR3 threaded hydraulic gear pump transforms the rotary motion produced by a motor into flow/pressure through oil. They allow for efficient pump control, as the pumping rate is proportional to the pump's rotational...
€65.34 (tax excl.)
€79.06 (tax included)
The GR-2 threaded hydraulic gear pump is used for pumping oil to be converted into pressure in a sealed circuit. Being small in size, it is ideal for applications where space is limited. The GR-2 pump can be used in a...
€12.48 (tax excl.)
€15.10 (tax included)
A straight RF pump flange connects an RF hydraulic pump to a piping system. The flange is straight and is installed perpendicular to the pump surface. Unlike elbow flanges, this flange is straight. Applications:...
€880.00 (tax excl.)
€1,064.80 (tax included)
A 24VDC 3KW oil-hydraulic motor pump is a combination of a 24-volt direct current (VDC) electric motor with a hydraulic pump to generate a high-pressure oil flow. Applications requiring precise motion and control,...
€49.98 (tax excl.)
€60.48 (tax included)
The GR1 flanged hydraulic gear pump is designed with a flange, which is a plate with bolt holes, making it easy to mount in a hydraulic system and connect to pipes, valves, or other hydraulic system components. It is...
€6.60 (tax excl.)
€7.99 (tax included)
The pump to speed multiplier adapter sleeve It is coupled to the pump shaft, and the pinion to the speed multiplier shaft. The rotation of the pinion rotates the sleeve, which transmits the pump's power to the speed...
€17.82 (tax excl.)
€21.56 (tax included)
The RFI Extended Pump Straight Flange is used to safely and efficiently connect an RFI hydraulic pump to a piping system. The flange has a straight shape and is longer than a standard flange, allowing for greater...
€550.00 (tax excl.)
€665.50 (tax included)
The electric clutch for mounting on a hydraulic pump is used to automatically connect and disconnect the pump using an electrical signal. It can be installed on GR-1 and GR-2 pumps. Available in 12VDC and 24VDC...
€49.90 (tax excl.)
€60.38 (tax included)
The GR1 threaded hydraulic gear pump is used for pumping oil into pressure in a closed circuit. The pump is designed to be threaded, making it easy to install and maintain. Applications: industrial hydraulic systems,...
€506.00 (tax excl.)
€612.26 (tax included)
Fixed displacement piston pumps for high power and pressure applications supply oil using axial or swashplate pistons. DIRECTION OF RIGHT TURN Pressure 350 bar. Threaded outlets/inlets. Suction pressure 0.85 - 2 bar....
Recently Viewed
€79.06 (tax included)
€65.34 (tax excl.)
A GR2 flanged hydraulic gear pump uses two gears to continuously drive the flow of fluid. It is designed to be mounted to a surface using a flange, allowing it to be connected to pipes or other hydraulic system...
€8.05 (tax excl.)
€9.74 (tax included)
A weldable female camlock is a quick-connect fitting for quickly and securely joining hoses and pipes, where one end of the fitting is designed to be welded to a pipe, hose, or other component. Applications: Chemical...
€3.60 (tax excl.)
€4.36 (tax included)
Mini pipe adapter with protective spring DN-5 mignon Its distinctive feature is the protective spring that surrounds the tube, providing greater safety and preventing accidental disconnections. Applications:...
€1.00 (tax excl.)
€1.21 (tax included)
A mini clamp is a clamping element designed to secure and support small-diameter rigid pipes in hydraulic systems. Its function is to secure the pipe to a surface (such as a structure, frame, or wall). Applications:...
€27.05 (tax excl.)
€32.73 (tax included)
A non-return valve allows fluid flow (liquid or gas) in one direction only and prevents reverse flow. Examples of use: Machine tool cooling systems, Lubrication systems, Pneumatic systems, Liquid supply systems at...
€129.97 (tax excl.)
€157.26 (tax included)
A 10x330 7001 belt sander is a specialized tool for sanding small and hard-to-reach areas. The 10x330 dimensions refer to the size of the sanding belt in millimeters (width x length), making it ideal for detailed and...

Menu