Click for more products.
No produts were found.

GR1 THREADED HYDRAULIC GEAR PUMP

Threaded GR-1 gear pump. Used to pump oil that will be converted into pressure, in a closed circuit.

  • Shaft taper 1:8
  • 3/8" threaded outlet and suction
  • Temperature -10ºC / 80ºC
  • Right turn.

SEE OTHER OPTIONS AND CONFIGURATIONS

Buy online GR1 THREADED HYDRAULIC GEAR PUMP at the best price

€49.90 (tax excl.)
FLOW
Reference:
48070001
Consult price for large quantities
Related products
€6.60 (tax excl.)
Sleeve or pinion to adapt a pump to a speed multiplier. Made of black blued F-114 steel It has the machining for the keyway incorporated Taper 1:8 Pinion insert according to DIN-5482 Check other settings
€13.80 (tax excl.)
GR-1 coupling hood According to European standard. Made of aluminum.
€15.14 (tax excl.)
The GR-1 full elastic coupling is a union system between pairs of shafts. They serve to compensate for misalignments between axles and absorb vibrations that may occur between them. Technical information: Made of...
Description

Product Details
48070001
Reference FLOW Price Add to cart
48070001 0.8cc/rev
€49.90
48070002 1.1cc/rev
€49.90
48070003 1.3cc/rev
€49.90
48070004 1.6cc/rev
€49.90
48070005 1.8cc/rev
€49.90
48070006 2.1cc/rev
€49.90
48070007 2.7cc/rev
€49.90
48070008 3.2cc/rev
€49.90
48070009 3.7cc/rev
€49.90
48070010 4.2cc/rev
€49.90
48070011 4.8cc/rev
€49.90
48070012 5.8cc/rev
€49.90
48070013 8 cc/rev
€49.90
48070014 9 cc/rev
€49.90
12 other products in the same category:
€96.00 (tax excl.)
The speed multiplier for tractor power take-off is a mechanism used to adapt the power and speed generated by an engine. Therefore, a power take-off speed multiplier works to link the high-pressure hydraulic pump with...
€12.51 (tax excl.)
90º angled flange for RGB pump Made of steel Thread according to ISO-1179-1 Supplied with 4 screws and O-ring. Pressure 315 bar. The size refers to the center-to-center distance of the screws.
€91.94 (tax excl.)
The manual hydraulic pump facilitates the operation of any hydraulic system, with an adequate cost and the necessary efficiency. It is served with a lever. Possibility of choosing different tanks and flow rates. In...
€5.31 (tax excl.)
90º flange for RG pump Made of steel Pressure 315 bar Supplied with screws and O-ring Thread according to ISO-1179-1 The size refers to the center-to-center distance of the screws.
€66.00 (tax excl.)
The speed multiplier for tractor power take-off is a mechanism used to adapt the power and speed generated by an engine. Therefore, a power take-off speed multiplier works to link the high-pressure hydraulic pump with...
€105.44 (tax excl.)
GR-3 gear pump to mount European flange Shaft taper 1:8 European flange outlet. Temperature -10ºC / 80ºC Right axis. SEE OTHER OPTIONS AND CONFIGURATIONS
€65.34 (tax excl.)
Threaded GR-2 gear pump. Used for pumping oil that will be converted into pressure in a sealed circuit. Shaft taper 1:8 1/2" threaded outlet/1/2" or 3/4" threaded suction Temperature -10ºC / 80ºC Right axis. SEE OTHER...
€66.00 (tax excl.)
The speed multiplier for tractor power take-off is a mechanism used to adapt the power and speed generated by an engine. Therefore, a power take-off speed multiplier works to link the high-pressure hydraulic pump with...
€105.44 (tax excl.)
A hydraulic pump transforms a rotary movement produced by a motor and transforms it into flow/pressure through oil. They allow effective control of pumping since the pumping flow rate is proportional to the rotation...
€10.40 (tax excl.)
Straight pump flange Made of steel Supplied with screws and O-ring. Pressure 250 bar. The size refers to the center-to-center distance of the screws.
€49.98 (tax excl.)
GR-1 gear pump for mounting flange Shaft taper 1:8 Inlet and outlet to be mounted with European flange Temperature -10ºC / 80ºC Right axis. * Check other options and settings * Buy HYDRAULIC GEAR PUMP GR1 flange...
€880.00 (tax excl.)
Oil-hydraulic motor pump with 24VDC motor Power 3000 W Engine speed 2000 rpm Protection IP-23 Ventilated electric motor. Motor diameter 151 mm Includes GR-2 11.3 cc hydraulic pump with flange. Support with legs for...

Menu

Settings