Click for more products.
No products were found.

GR3 HYDRAULIC GEAR PUMP WITH FLANGE

A GR3 flanged hydraulic gear pump uses two gears to propel fluid. As the gears rotate, fluid is pumped between them, increasing its pressure. They are used in a wide range of applications, including industrial hydraulic systems, lifting systems, and fluid control systems.

Applications: mobile hydraulic systems, hydraulic presses, lifting systems and machine tools.

Technical sheet:

  • Taper axis 1:8
  • European flange output.
  • Temperature -10ºC / 80ºC
  • Right axis.

CHECK OTHER OPTIONS AND CONFIGURATIONS

Read moreShow less
€127.58 (tax incl.)
€105.44 (tax excl.)
CAUDAL
  • 25 cc/rev
  • 32 cc/rev
  • 38 cc/rev
  • 44 cc/rev
  • 50 cc/rev
  • 55 cc/rev
  • 63 cc/rev
  • 70 cc/rev
  • 80 cc/rev
  • 90 cc/rev
Reference:
48080050
Description

GR3 hydraulic gear pump with flange

Read moreShow less
Product Details
48080050
Comments (0)
You may also like
€12.48 (tax excl.)
€15.10 (tax incl.)
A straight RF pump flange connects an RF hydraulic pump to a piping system. The flange is straight and is installed perpendicular to the pump surface. Unlike elbow flanges, this flange is straight. Applications:...
€17.82 (tax excl.)
€21.56 (tax incl.)
The RFI Extended Pump Straight Flange is used to safely and efficiently connect an RFI hydraulic pump to a piping system. The flange has a straight shape and is longer than a standard flange, allowing for greater...
€15.01 (tax excl.)
€18.16 (tax incl.)
The RGB pump elbow flange is used to connect an RGB hydraulic pump to other components of a hydraulic system. This can be useful in applications where space is limited or where the pump needs to be installed in a...
€6.37 (tax excl.)
€7.71 (tax incl.)
An RG pump elbow flange is used to connect an RG hydraulic pump to a piping system. It can be useful in applications where space is limited or where the pump needs to be installed in a specific position. This flange...
€32.00 (tax excl.)
€38.72 (tax incl.)
The GR-3 elastic coupling is a coupling system for connecting pairs of shafts, allowing for a certain degree of angular and axial misalignment between them. Its function is to absorb vibrations, imbalances, and...
8 other products in the same category:
€76.00 (tax excl.)
€91.96 (tax incl.)
A pulley-mounted pump bracket mounts directly onto hydraulic gear pumps. Technical sheet: Possibility of choosing different shafts. The output shaft is cylindrical. There is the possibility of a 1:8 tapered shaft. The...
€17.82 (tax excl.)
€21.56 (tax incl.)
The RFI Extended Pump Straight Flange is used to safely and efficiently connect an RFI hydraulic pump to a piping system. The flange has a straight shape and is longer than a standard flange, allowing for greater...
€96.00 (tax excl.)
€116.16 (tax incl.)
The tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier connects the high-pressure hydraulic pump to the tractor's PTO. This model...
€490.00 (tax excl.)
€592.90 (tax incl.)
GR1 Gear Flow Divider A GR1 two-body gear flow divider splits a unidirectional flow into two proportional flows, using two gear bodies that rotate at the same speed on a single shaft. Ideal for synchronizing the speed...
€49.90 (tax excl.)
€60.38 (tax incl.)
The GR1 threaded hydraulic gear pump is used for pumping oil into pressure in a closed circuit. The pump is designed to be threaded, making it easy to install and maintain. Applications: industrial hydraulic systems,...
€12.48 (tax excl.)
€15.10 (tax incl.)
A straight RF pump flange connects an RF hydraulic pump to a piping system. The flange is straight and is installed perpendicular to the pump surface. Unlike elbow flanges, this flange is straight. Applications:...
€49.98 (tax excl.)
€60.48 (tax incl.)
The GR1 flanged hydraulic gear pump is designed with a flange, which is a plate with bolt holes, making it easy to mount in a hydraulic system and connect to pipes, valves, or other hydraulic system components. It is...
€6.60 (tax excl.)
€7.99 (tax incl.)
The pump to speed multiplier adapter sleeve It is coupled to the pump shaft, and the pinion to the speed multiplier shaft. The rotation of the pinion rotates the sleeve, which transmits the pump's power to the speed...
Recently Viewed
€127.58 (tax incl.)
€105.44 (tax excl.)
A GR3 flanged hydraulic gear pump uses two gears to propel fluid. As the gears rotate, fluid is pumped between them, increasing its pressure. They are used in a wide range of applications, including industrial...
€3.61 (tax excl.)
€4.37 (tax incl.)
The screw hydraulic flow regulator is a valve designed to precisely control and adjust the flow of oil in hydraulic circuits by means of an adjusting screw. Applications: Industrial hydraulic systems, Agricultural...
€39.00 (tax excl.)
€47.19 (tax incl.)
A K1 ball grease fitting is a lubrication point that facilitates the introduction of grease into bearings, bushings, and other mechanisms that require periodic lubrication. Applications: industrial machinery,...

Menu

Settings