Click for more products.
No products were found.

ELECTRIC CLUTCH

The electric clutch for mounting on a hydraulic pump is used to automatically connect and disconnect the pump using an electrical signal.

  • It can be installed on GR-1 and GR-2 pumps.
  • Available in 12VDC and 24VDC
  • Maximum speed 5000 rpm at 65 Nm.
  • Double pulley drive for type A belt
  • Weight 5.6 Kg.
Read moreShow less
€665.50 (tax incl.)
€550.00 (tax excl.)
VOLTAGE/VOLUME
  • 12V DC
  • 24V DC
Reference:
4819012
Description

Electric clutch

Read moreShow less
Product Details
4819012
Comments (0)
You may also like
€65.34 (tax excl.)
€79.06 (tax incl.)
The GR-2 threaded hydraulic gear pump is used for pumping oil to be converted into pressure in a sealed circuit. Being small in size, it is ideal for applications where space is limited. The GR-2 pump can be used in a...
€49.90 (tax excl.)
€60.38 (tax incl.)
The GR1 threaded hydraulic gear pump is used for pumping oil into pressure in a closed circuit. The pump is designed to be threaded, making it easy to install and maintain. Applications: industrial hydraulic systems,...
8 other products in the same category:
€101.13 (tax excl.)
€122.37 (tax incl.)
A hand hydraulic pump makes operating any hydraulic system easier. It uses human power to convert mechanical energy into hydraulic energy. They are relatively simple to operate and maintain, making them an economical...
€15.01 (tax excl.)
€18.16 (tax incl.)
The RGB pump elbow flange is used to connect an RGB hydraulic pump to other components of a hydraulic system. This can be useful in applications where space is limited or where the pump needs to be installed in a...
€12.48 (tax excl.)
€15.10 (tax incl.)
A straight RF pump flange connects an RF hydraulic pump to a piping system. The flange is straight and is installed perpendicular to the pump surface. Unlike elbow flanges, this flange is straight. Applications:...
€880.00 (tax excl.)
€1,064.80 (tax incl.)
A 24VDC 3KW oil-hydraulic motor pump is a combination of a 24-volt direct current (VDC) electric motor with a hydraulic pump to generate a high-pressure oil flow. Applications requiring precise motion and control,...
€66.00 (tax excl.)
€79.86 (tax incl.)
The tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier works to connect the high-pressure hydraulic pump to the tractor's PTO. It is...
€6.37 (tax excl.)
€7.71 (tax incl.)
An RG pump elbow flange is used to connect an RG hydraulic pump to a piping system. It can be useful in applications where space is limited or where the pump needs to be installed in a specific position. This flange...
€6.60 (tax excl.)
€7.99 (tax incl.)
The pump to speed multiplier adapter sleeve It is coupled to the pump shaft, and the pinion to the speed multiplier shaft. The rotation of the pinion rotates the sleeve, which transmits the pump's power to the speed...
€65.34 (tax excl.)
€79.06 (tax incl.)
A GR2 flanged hydraulic gear pump uses two gears to continuously drive the flow of fluid. It is designed to be mounted to a surface using a flange, allowing it to be connected to pipes or other hydraulic system...
Recently Viewed
€665.50 (tax incl.)
€550.00 (tax excl.)
The electric clutch for mounting on a hydraulic pump is used to automatically connect and disconnect the pump using an electrical signal. It can be installed on GR-1 and GR-2 pumps. Available in 12VDC and 24VDC...

Menu

Settings