SPEED MULTIPLIER TRACTOR MALE TAKE

The tractor PTO speed multiplier is a mechanism used to adapt the power and speed generated by an engine. Therefore, a PTO speed multiplier works to connect the high-pressure hydraulic pump to the tractor's PTO.

It is mainly used in agricultural and industrial applications where increased rotation speed is required.

Technical sheet:

For mounting on GR-3 and GR-2 type pumps
Male tractor socket shaft DIN-9611 1"-3/8 35mm (6 teeth)
Maximum 540 rpm on tractor intake.
Max pressure 200 bar
DIN-5482 motor crown
Multiplication ratio 1 : 3.5
Supplied without oil, we recommend SAE-90 type oil
Maximum temperature: 120ºC
Designed to withstand the most demanding conditions of agricultural or industrial work.
They are ideal for tractor implements (loader, forestry crane, wood splitter, chipper, backhoe, etc.)

€79.86 (tax included)

€66.00 (tax excl.)

SIZE

GR-2
GR-3

Reference:

48131

Description
Comments

Description

Speed multiplier male tractor socket

GR-3

Product Details

Reference 48131

Comments

12 other products in the same category:

GR1 GEAR FLOW DIVIDER

€490.00 (tax excl.)

€592.90 (tax included)

GR1 Gear Flow Divider A GR1 two-body gear flow divider splits a unidirectional flow into two proportional flows, using two gear bodies that rotate at the same speed on a single shaft. Ideal for synchronizing the speed...

ANGLED FLANGE FOR RG PUMP

€6.37 (tax excl.)

€7.71 (tax included)

An RG pump elbow flange is used to connect an RG hydraulic pump to a piping system. It can be useful in applications where space is limited or where the pump needs to be installed in a specific position. This flange...

MANUAL HYDRAULIC PUMP

€101.13 (tax excl.)

€122.37 (tax included)

A hand hydraulic pump makes operating any hydraulic system easier. It uses human power to convert mechanical energy into hydraulic energy. They are relatively simple to operate and maintain, making them an economical...

GR3 THREADED HYDRAULIC GEAR PUMP

€105.44 (tax excl.)

€127.58 (tax included)

A GR3 threaded hydraulic gear pump transforms the rotary motion produced by a motor into flow/pressure through oil. They allow for efficient pump control, as the pumping rate is proportional to the pump's rotational...

GR2 THREADED HYDRAULIC GEAR PUMP

€65.34 (tax excl.)

€79.06 (tax included)

The GR-2 threaded hydraulic gear pump is used for pumping oil to be converted into pressure in a sealed circuit. Being small in size, it is ideal for applications where space is limited. The GR-2 pump can be used in a...

GR2 HYDRAULIC GEAR PUMP WITH FLANGE

€65.34 (tax excl.)

€79.06 (tax included)

A GR2 flanged hydraulic gear pump uses two gears to continuously drive the flow of fluid. It is designed to be mounted to a surface using a flange, allowing it to be connected to pipes or other hydraulic system...

STRAIGHT FLANGE FOR RFI EXTENDED PUMP

€17.82 (tax excl.)

€21.56 (tax included)

The RFI Extended Pump Straight Flange is used to safely and efficiently connect an RFI hydraulic pump to a piping system. The flange has a straight shape and is longer than a standard flange, allowing for greater...

HYDRAULIC OIL MOTOR PUMP 24VDC 3KW

€880.00 (tax excl.)

€1,064.80 (tax included)

A 24VDC 3KW oil-hydraulic motor pump is a combination of a 24-volt direct current (VDC) electric motor with a hydraulic pump to generate a high-pressure oil flow. Applications requiring precise motion and control,...

STRAIGHT FLANGE FOR RF PUMP

€12.48 (tax excl.)

€15.10 (tax included)

A straight RF pump flange connects an RF hydraulic pump to a piping system. The flange is straight and is installed perpendicular to the pump surface. Unlike elbow flanges, this flange is straight. Applications:...

FIXED FLOW PISTON PUMP

€506.00 (tax excl.)

€612.26 (tax included)

Fixed displacement piston pumps for high power and pressure applications supply oil using axial or swashplate pistons. DIRECTION OF RIGHT TURN Pressure 350 bar. Threaded outlets/inlets. Suction pressure 0.85 - 2 bar....

GR1 HYDRAULIC GEAR PUMP WITH FLANGE

€49.98 (tax excl.)

€60.48 (tax included)

The GR1 flanged hydraulic gear pump is designed with a flange, which is a plate with bolt holes, making it easy to mount in a hydraulic system and connect to pipes, valves, or other hydraulic system components. It is...

ELECTRIC CLUTCH

€550.00 (tax excl.)

€665.50 (tax included)

The electric clutch for mounting on a hydraulic pump is used to automatically connect and disconnect the pump using an electrical signal. It can be installed on GR-1 and GR-2 pumps. Available in 12VDC and 24VDC...