Click for more products.
No products were found.

WELDABLE STRAIGHT TUBE JOINT DIN 2353 S

Weldable straight pipe joint DIN 2353 S

  • Operating temperature -20 / 120°C.
  • Made of drawn steel DIN3859-1.
  • Bichromated coating ISO 4042.
  • Corrosion resistance.
  • Work pressures
    • 6-8-10-12-14 600 bar.
    • 16-20-25-30 400 bar .
    • 38,315 bar.

Assembly instructions

Read moreShow less
€6.06 (tax incl.)
€5.01 (tax excl.)
DIAMETERS
  • Ø 6
  • Ø8
  • Ø 10
  • Ø 12
  • Ø 14
  • Ø 16
  • Ø 20
  • Ø 25
  • Ø 30
  • Ø 38
Reference:
33510005
Description

Weldable straight pipe joint DIN 2353 S

UNION TUBO RECTO SOLDABLE S DIN 2353

Read moreShow less
Product Details
33510005
Comments (0)
8 other products in the same category:
€1.39 (tax excl.)
€1.68 (tax incl.)
Anti-drip safety bicone DIN 2353 S Operating temperature -20ºC / 120ºC. Made of drawn steel DIN3859-1. Bichromated coating ISO 4042. Corrosion resistance. Work pressures 6-8-10-12-14 600 bar. 16-20-25-30 400 bar ....
€4.25 (tax excl.)
€5.14 (tax incl.)
Straight tube union with tapered thread DIN-2353 S Operating temperature -20 / 120°C. Made of drawn steel DIN3859-1. Bichromated coating ISO 4042. Corrosion resistance Work pressures Ø 6-8-10-12-14 600 bar. Ø...
€4.40 (tax excl.)
€5.32 (tax incl.)
Fitting DIN-2353 S female thread tube union Working temperature -20 / 120?C. Made of DIN3859-1 drawn steel. ISO 4042 bichromate coating. Corrosion resistance. Working pressures Ø 6-8-10-12-14 600 bar. Ø 16-20-25-30...
€10.16 (tax excl.)
€12.29 (tax incl.)
DIN-2353 S swivel elbow pipe fitting Operating temperature -20 / 120°C. Made of drawn steel DIN3859-1. Bichromated coating ISO 4042. Corrosion resistance. Work pressures 6-8-10-12-14 600 bar. 16-20-25-30 400 bar ....
€0.29 (tax excl.)
€0.35 (tax incl.)
A DIN 2353 S bicone is a cutting ring used in hydraulic pipe connection systems that comply with the DIN 2353 standard, belonging to the light series. Applications: Industrial machinery, Construction equipment, Mobile...
€7.38 (tax excl.)
€8.93 (tax incl.)
A DIN-2353 S tee fitting is used in high-pressure hydraulic systems to create a T-shaped branch in a rigid piping system. It is based on the robust shear ring system standardized by DIN 2353. Applications: Heavy...
€0.30 (tax excl.)
€0.36 (tax incl.)
A copper washer is designed to create a tight, deformable seal under compression, making it indispensable in joints where excellent sealing, conductivity, and corrosion resistance are required under specific...
€10.01 (tax excl.)
€12.11 (tax incl.)
DIN-2353 S side tee adapter Operating temperature -20 / 120°C. Made of drawn steel DIN3859-1. Bichromated coating ISO 4042. Corrosion resistance. Work pressures 6-8-10-12-14 600 bar. 16-20-25-30 400 bar . 38,315 bar....
Recently Viewed
€6.06 (tax incl.)
€5.01 (tax excl.)
Weldable straight pipe joint DIN 2353 S Operating temperature -20 / 120°C. Made of drawn steel DIN3859-1. Bichromated coating ISO 4042. Corrosion resistance. Work pressures 6-8-10-12-14 600 bar. 16-20-25-30 400 bar ....
€35.57 (tax excl.)
€43.04 (tax incl.)
Straight grease fitting H1 Its function is to apply small amounts of grease to specific lubrication points on machinery and equipment. It is an essential component in preventative maintenance, as it ensures proper...
€5.40 (tax excl.)
€6.53 (tax incl.)
An ORFS straight bulkhead is a hydraulic fitting designed to pass a pipe connection through a panel or wall straight, using an ORFS connection to ensure a watertight seal. Technical sheet: ORFS fitting in carbon...
€58.60 (tax excl.)
€70.91 (tax incl.)
INOX-304 Solenoid Valve Normally Open. Size from 1/8" to 1/2" It comes with a coil and connector. Available in high pressure and NPT thread. IP-65 protection Operating temperature -20ºC / 80ºC Viscosity limit 20 cST....
€34.80 (tax excl.)
€42.11 (tax incl.)
Lever-operated oil transfer pump 10L/min 13015 Its function is to transfer liquids, especially oils, between containers quickly and efficiently. It works by using a lever that activates an internal mechanism that...
€16.67 (tax excl.)
€20.17 (tax incl.)
The male threaded end serves to transform the rod outlet of ISO-21287 (5003) cylinders into a male thread. Main features: Metric thread ISO-21287 Standard Supplied without nut. Made of zinc-plated steel.

Menu

Settings