BRASS FEMALE PLUG
€0.78
(tax excl.)
€0.94
(tax included)
INSTALLATION FITTINGS
€41.36
(tax excl.)
€50.05
(tax included)
A fitting wrench is a hand tool used to tighten or loosen fittings in piping systems, especially those using copper, plastic, or stainless steel tubing. Its function is to ensure a tight and secure connection between...
€14.75
(tax excl.)
€17.85
(tax included)
A drill-to-pipe branch fitting is a pneumatic or hydraulic connector that allows an air or fluid intake to be taken directly from a drilled hole made in a main pipe. Applications: Compressed air networks, Pneumatic...
€54.42
(tax excl.)
€65.85
(tax included)
A 5-way 1/2" aluminum manifold is a fundamental component in compressed air systems for distributing a main air supply to multiple branches, allowing multiple pieces of equipment or lines to be connected from a single...
€40.10
(tax excl.)
€48.52
(tax included)
A 3-way 1/2" aluminum manifold is an essential component in compressed air systems, designed to distribute a main air supply to multiple branches. It is suitable for medium flow rates and applications where corrosion...
€2.27
(tax excl.)
€2.75
(tax included)
Technopolymer nut with stainless steel ring Suitable for: Compressed air, inert gases, vacuum. Temperature -30ºC / 80ºC Available diameters 16-20-25-32-40-50-63 Reaction to fire: EN 13501-1:2007+A1:2009 EN...
€14.69
(tax excl.)
€17.77
(tax included)
Curved link pipe for air installations Possibility to choose between diameter 16,20 and 25 mm. Pressure range -0.6 / 16 bar. Exterior and interior titanium-based treatment, exterior electroplating paint, Blue color...
€1.75
(tax excl.)
€2.12
(tax included)
An isophonic clamp consists of a metal band and an inner gasket made of rubber or elastomeric material. The rubber gasket creates a tight seal that dampens vibrations and reduces noise. Its function is to hold pipes,...
€32.00
(tax excl.)
€38.72
(tax included)
Wall light with threaded inlet and 2 outlets.
It is a plumbing accessory designed to be mounted on a wall and divide a connection into two independent branches.
Technical data sheet:
Applicable in compressed air...
€12.43
(tax excl.)
€15.04
(tax included)
Reduced TE fitting for tube of technopolymer installations. Suitable for: Compressed air, inert gases, vacuum. Temperature -30ºC / 80ºC Available diameters 16-20-25-32-40-50-63 Reaction to fire: EN...
€8.42
(tax excl.)
€10.19
(tax included)
Reduced straight union for installations This is a plumbing and piping system accessory designed to connect two sections of pipe with different diameters. Its function is to join these two sections in a secure and...
€16.22
(tax excl.)
€19.63
(tax included)
Threaded drill branch fitting This type of fitting has, on one side, a threaded connection that adapts to the thread of a pipe and, on the other, a hole or drill that allows a smaller diameter pipe or accessory to be...
€58.08
(tax excl.)
€70.28
(tax included)
A pipe cutter is a hand tool used to cut round pipes at a right angle. It's the quickest and most convenient way to cut a pipe. Technical specifications: Telescopic blade feeding system. Cut from 4 to 42 mm. Ergonomic...
€14.75
(tax excl.)
€17.85
(tax included)
Technopolymer central thread TE fitting for tube Suitable for: Compressed air, inert gases, vacuum. Temperature -30ºC / 80ºC Available diameters 16-20-25-32-40-50-63 Reaction to fire: EN 13501-1:2007+A1:2009 EN...
€4.52
(tax excl.)
€5.47
(tax included)
Straight union for tapered threaded pipe for networks A straight pipe-to-conical thread union for networks is a connection fitting used to join a pipe with a threaded component in fluid networks, ensuring a leak-proof...
€5.53
(tax excl.)
€6.69
(tax included)
Plug for pipe installations It is designed to hermetically seal the end of a tube, preventing the passage of fluids (liquids or gases) or solids. Applications: Construction, Industry, Plumbing, Heating and air...
€10.21
(tax excl.)
€12.35
(tax included)
A TE pipe fitting for compressed air network installations is used to divide or branch a main pipe line into two secondary lines, usually at a 90º angle to the main flow.
Applications: Manufacturing and automotive...
€6.30
(tax excl.)
€7.62
(tax included)
90° elbow joint A 90° elbow fitting is a pneumatic component that allows pipes or hoses to be connected at a right angle, ensuring an efficient change of direction of compressed air, with high sealing and reliability....
€7.36
(tax excl.)
€8.91
(tax included)
Technopolymer fitting for 45º tube union (stainless steel ring) Suitable for: Compressed air, inert gases, vacuum. Temperature -30ºC / 80ºC Available diameters 16-20-25-32-40-50-63 Reaction to fire: EN...
€32.00
(tax excl.)
€38.72
(tax included)
Extruded aluminium tube EN AW T6 UNI-EN 755-2 (4mt) It is a tubular aluminium profile obtained from an extrusion process. In this process, the aluminium is forced to pass through a die with the desired shape, thus...
€33.40
(tax excl.)
€40.41
(tax included)
A useful pipe punch is a hand tool used to punch holes in pipes of different materials, such as PVC, polyethylene, metal, etc., in a precise and safe manner. They are indispensable in various applications, from the...
€8.36
(tax excl.)
€10.12
(tax included)
A heavy-duty clamp is a fastening element designed to firmly and securely secure pipes, cables, or hoses. Unlike conventional clamps, heavy-duty clamps can withstand heavier loads and withstand more demanding...
€6.82
(tax excl.)
€8.25
(tax included)
Straight pipe fitting for compressed air networks
A straight tube fitting for compressed air networks is a pneumatic connector used to join two tubes in alignment, allowing the continuity of airflow without changes in...
Approved aluminum pipe, fittings and accessories for compressed air installations.
Different measurements to choose from
