Click for more products.
No produts were found.
Click for more products.
No produts were found.

AIR PRESSURE MULTIPLIER BOOSTER 1:3.5

A 1:3.5 booster air pressure multiplier is a device that allows you to obtain a higher output pressure than the input pressure.

Technical sheet:

  • Compression ratios 1:3.5
  • It is recommended at the entrance, air filtered to 25 microns.
  • Working temperature 10ºC / 50ºC
  • Inlet pressure 3-8 bar.
  • The control circuit integrated into the system allows the desired pressure to be obtained by adjusting only the inlet pressure.
  • Easy to apply, its small size, with a good flow rate can be the answer to all practical and economical applications that require a higher pressure than that supplied by the compressor.
  • Typically used to increase the force of pneumatic cylinders and achieve greater forces with reduced dimensions and lower weight. High-pressure blow-molding of components, component burst testing, or component burst testing.
  • It is advisable to use a tank to have a constant output pressure.

SUPPLIED WITHOUT FIXING BRACKETS

€868.30 (tax included)
€717.60 (tax excl.)
Reference:
5401
Description

Booster air pressure multiplier 1:3.5

Product Details
5401
Comments
Related products
€20.28 (tax excl.)
€24.54 (tax included)
A pressure booster bracket is an accessory designed to secure and stabilize a pressure booster in a hydraulic or pneumatic system. Common applications: Industrial hydraulic and pneumatic systems, Test and measurement...
€25.02 (tax excl.)
€30.27 (tax included)
Modular pressure regulator A modular pressure regulator is a pneumatic device designed to reduce, regulate, and maintain a constant fluid pressure, regardless of variations in inlet pressure. Its modular design allows...
€37.86 (tax excl.)
€45.81 (tax included)
A compressed air tank is a pressure vessel designed to store compressed air. This compressed air is generated by a compressor and stored in the tank, serving as a reserve of pneumatic energy. Compressed air boilers...
6 other products in the same category:
€46.80 (tax excl.)
€56.63 (tax included)
An MPO30 air-oil multiplier gasket kit is a set of sealing parts designed specifically for the maintenance and repair of MPO30 model air-oil pressure multipliers. Available in single and double acting.
€46.80 (tax excl.)
€56.63 (tax included)
An MPO25 multiplier gasket kit is a set of sealing parts specifically designed for the maintenance and repair of MPO25 model air-oil pressure multipliers. Available in single and double effect.
€676.00 (tax excl.)
€817.96 (tax included)
A 1:2.5 air pressure booster is a device that allows for higher output pressure than input pressure. The system's integrated control circuit allows the desired pressure to be achieved by adjusting only the input...
€20.28 (tax excl.)
€24.54 (tax included)
A pressure booster bracket is an accessory designed to secure and stabilize a pressure booster in a hydraulic or pneumatic system. Common applications: Industrial hydraulic and pneumatic systems, Test and measurement...
€611.52 (tax excl.)
€739.94 (tax included)
The MPO25 air-oil pressure multiplier is a device consisting of a cylinder whose rod acts directly on the oil in the chamber by increasing the high pressure value of 200 bar. Technical sheet: In the single-acting...
€572.00 (tax excl.)
€692.12 (tax included)
The MPO30 air-oil pressure multiplier is a device consisting of a cylinder whose rod acts directly on the oil in the chamber by increasing the high pressure value to 200 bar. Common applications: Industrial machinery,...
Recently Viewed
€868.30 (tax included)
€717.60 (tax excl.)
A 1:3.5 booster air pressure multiplier is a device that allows you to obtain a higher output pressure than the input pressure. Technical sheet: Compression ratios 1:3.5 It is recommended at the entrance, air filtered...
€86.30 (tax excl.)
€104.42 (tax included)
Straight single chain lubricator sprocket. Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear...
€21.82 (tax excl.)
€26.40 (tax included)
CX timing belt The combination of the trapezoidal profile and the teeth ensures power transmission with minimal slip losses. The synchronization between the motor and driven shafts is very precise, making it ideal for...
€2.31 (tax excl.)
€2.80 (tax included)
A JIC male to BSP female union is a fitting used in fluid systems to connect two components or pipe lines that use different thread standards. Applications: Industrial machinery and heavy equipment, maintenance and...
€55.40 (tax excl.)
€67.03 (tax included)
A Karcher M22x150 male adapter is specifically designed to connect various high-pressure cleaning equipment, especially those compatible with the Karcher brand. It has a 22mm diameter and a 1.50 thread pitch....
€2.80 (tax excl.)
€3.39 (tax included)
Symmetrical polyurethane collar Symmetrical seals are used in hydraulic and pneumatic cylinders for fluid sealing. They are housed within the cylinder head and seal against the cylinder rod, preventing fluid from...

Menu