Click for more products.
No produts were found.
Click for more products.
No produts were found.

AIR PRESSURE MULTIPLIER BOOSTER 1:2.5

A 1:2.5 air pressure booster is a device that allows for higher output pressure than input pressure. The system's integrated control circuit allows the desired pressure to be achieved by adjusting only the input pressure.

Technical sheet:

  • Compression ratios 1:2.5
  • It is recommended at the entrance, air filtered to 25 microns.
  • Working temperature 10ºC / 50ºC
  • Inlet pressure 3-8 bar.
  • Easy to apply, its small size, with a good flow rate can be the answer to all practical and economical applications that require a higher pressure than that supplied by the compressor.
  • Typically used to increase the force of pneumatic cylinders and achieve greater forces with reduced dimensions and lower weight. High-pressure blow-molding of components, component burst testing, or component burst testing.
  • It is advisable to use a tank to have a constant output pressure.
  • Consult us for tank flow and volume ratios.

Supplied without fixing bracket.

€817.96 (tax included)
€676.00 (tax excl.)
Reference:
5400
Description

Booster air pressure multiplier 1:2.5

MULTIPLICADOR PRESION AIRE BOOSTER 1:2.5

MULTIPLICADOR PRESION AIRE BOOSTER 1:2.5

------------------------------------------------------------------------------------------

Example of air amplifier assembly

1.- Air treatment group 3206

2.- Pressure regulator 3403

3.- Pressure Multiplier 5400

4.- Non-return valve 1501

5.- Compressed air boiler 4315

MULTIPLICADOR PRESION AIRE BOOSTER 1:2.5

Product Details
5400
Comments
Related products
€25.02 (tax excl.)
€30.27 (tax included)
Modular pressure regulator A modular pressure regulator is a pneumatic device designed to reduce, regulate, and maintain a constant fluid pressure, regardless of variations in inlet pressure. Its modular design allows...
€37.86 (tax excl.)
€45.81 (tax included)
A compressed air tank is a pressure vessel designed to store compressed air. This compressed air is generated by a compressor and stored in the tank, serving as a reserve of pneumatic energy. Compressed air boilers...
€16.33 (tax excl.)
€19.76 (tax included)
The stainless steel check valve is used to ensure that a liquid or gas flow is directed in one direction within a circuit and completely shuts off flow in the other direction. It is made entirely of stainless steel....
6 other products in the same category:
€46.80 (tax excl.)
€56.63 (tax included)
An MPO30 air-oil multiplier gasket kit is a set of sealing parts designed specifically for the maintenance and repair of MPO30 model air-oil pressure multipliers. Available in single and double acting.
€46.80 (tax excl.)
€56.63 (tax included)
An MPO25 multiplier gasket kit is a set of sealing parts specifically designed for the maintenance and repair of MPO25 model air-oil pressure multipliers. Available in single and double effect.
€20.28 (tax excl.)
€24.54 (tax included)
A pressure booster bracket is an accessory designed to secure and stabilize a pressure booster in a hydraulic or pneumatic system. Common applications: Industrial hydraulic and pneumatic systems, Test and measurement...
€717.60 (tax excl.)
€868.30 (tax included)
A 1:3.5 booster air pressure multiplier is a device that allows you to obtain a higher output pressure than the input pressure. Technical sheet: Compression ratios 1:3.5 It is recommended at the entrance, air filtered...
€572.00 (tax excl.)
€692.12 (tax included)
The MPO30 air-oil pressure multiplier is a device consisting of a cylinder whose rod acts directly on the oil in the chamber by increasing the high pressure value to 200 bar. Common applications: Industrial machinery,...
€611.52 (tax excl.)
€739.94 (tax included)
The MPO25 air-oil pressure multiplier is a device consisting of a cylinder whose rod acts directly on the oil in the chamber by increasing the high pressure value of 200 bar. Technical sheet: In the single-acting...
Recently Viewed
€817.96 (tax included)
€676.00 (tax excl.)
A 1:2.5 air pressure booster is a device that allows for higher output pressure than input pressure. The system's integrated control circuit allows the desired pressure to be achieved by adjusting only the input...
€12.00 (tax excl.)
€14.52 (tax included)
A Ø10 solenoid valve coil is used to operate a solenoid valve in industrial cleaning systems, mainly in dust collectors with bag filters or cartridges. It generates a magnetic field when energized that opens or closes...
€4.79 (tax excl.)
€5.80 (tax included)
The BS-4835 clamp is primarily used in the food, pharmaceutical, and biotechnology industries. BS-4835 specifies the dimensions and tolerances for this type of connection, ensuring a sanitary, fast, and secure...
€48.00 (tax excl.)
€58.08 (tax included)
A pressure washer gun It allows you to control and direct the high-pressure water jet using a trigger. Industrial, agricultural and intensive cleaning applications. Main features: Stainless steel metal parts. 250 bar....
€13.36 (tax excl.)
€16.17 (tax included)
The 3-piece NPT ball valve features a removable three-piece body (body, ball, and stem). Its NPT threaded connections allow for secure, leak-tight installation on pipes of the same threaded standard. Applications:...
€75.75 (tax excl.)
€91.66 (tax included)
An ISO-5599-1 bistable electric pilot valve is a two-way valve that maintains its last position without requiring a continuous electrical signal. The main actuation is achieved by fluid pressure controlled by pilot...

Menu