Click for more products.
No products were found.

AIR-OIL PRESSURE MULTIPLIER MPO25

The MPO25 air-oil pressure multiplier is a device consisting of a cylinder whose rod acts directly on the oil in the chamber by increasing the high pressure value of 200 bar.

Technical sheet:

  • In the single-acting version we pressurize a volume of 25 cc with a compression ratio of 1:30
  • In the double-acting version we pressurize a volume of 50 cc with a compression ratio of 1:25
  • For different volumes or compression ratios, please contact us .
  • It is recommended at the entrance, air filtered to 40 microns.
  • Working temperature -10ºC / 70ºC
  • Max inlet pressure 7 bar.
  • Recommended oil: for oil-hydraulic circuits.
Read moreShow less
€739.94 (tax incl.)
€611.52 (tax excl.)
SELECT TYPE
  • SINGLE EFFECT
  • DOUBLE EFFECT
Reference:
54030041
Description

MPO25 air-oil pressure multiplier

MULTIPLICADOR PRESION AIRE-ACEITE MPO25MULTIPLICADOR PRESION AIRE-ACEITE MPO25

EXAMPLE OF MULTIPLIER ASSEMBLY

  1. Air treatment group 3206
  2. Non-return valve 1501
  3. Distributor 3/2 3" Distributor 5/2 2146
  4. Quick exhaust valve 1505
  5. Pressure Multiplier 5403
  6. Oil tank
  7. Pressure switch 4302
  8. Single-acting cylinder
Read moreShow less
Product Details
54030041
Comments (0)
6 other products in the same category:
€46.80 (tax excl.)
€56.63 (tax incl.)
An MPO25 multiplier gasket kit is a set of sealing parts specifically designed for the maintenance and repair of MPO25 model air-oil pressure multipliers. Available in single and double effect.
€46.80 (tax excl.)
€56.63 (tax incl.)
An MPO30 air-oil multiplier gasket kit is a set of sealing parts designed specifically for the maintenance and repair of MPO30 model air-oil pressure multipliers. Available in single and double acting.
€717.60 (tax excl.)
€868.30 (tax incl.)
A 1:3.5 air pressure booster multiplier is a device that allows you to obtain an outlet pressure greater than the inlet pressure. Technical specifications: Compression ratios 1:3.5 It is recommended that the air be...
€572.00 (tax excl.)
€692.12 (tax incl.)
The MPO30 air-oil pressure multiplier is a device consisting of a cylinder whose rod acts directly on the oil in the chamber by increasing the high pressure value to 200 bar. Common applications: Industrial machinery,...
€20.28 (tax excl.)
€24.54 (tax incl.)
A pressure multiplier bracket is an accessory designed to fix and stabilize a pressure multiplier in a hydraulic or pneumatic system. Common applications: Industrial hydraulic and pneumatic systems, Testing and...
€676.00 (tax excl.)
€817.96 (tax incl.)
A 1:2.5 air pressure booster is a device that allows for a higher output pressure than input pressure. The integrated control circuit allows the desired pressure to be achieved by adjusting only the input pressure....
Recently Viewed
€739.94 (tax incl.)
€611.52 (tax excl.)
The MPO25 air-oil pressure multiplier is a device consisting of a cylinder whose rod acts directly on the oil in the chamber by increasing the high pressure value of 200 bar. Technical sheet: In the single-acting...
€5.40 (tax excl.)
€6.53 (tax incl.)
A female-female mini brass ball valve is a compact control valve, designed for applications where space is limited and on/off control of fluid flow is required. Applications: Plumbing and heating systems, pneumatic...
€5.40 (tax excl.)
€6.53 (tax incl.)
An oil nozzle with a valve, part number 12642, is used to precisely control the flow of oil from a container without dripping. The nozzle incorporates an opening and closing mechanism (the valve) that allows for...
€7.00 (tax excl.)
€8.47 (tax incl.)
90° male bulkhead fitting It is used to run cables or pipes through a wall or panel. It is used in construction, telecommunications, electrical work, and industrial automation. Technical specifications: 60° conical...
€32.00 (tax excl.)
€38.72 (tax incl.)
Extruded aluminium tube EN AW T6 UNI-EN 755-2 (4mt) It is a tubular aluminium profile obtained from an extrusion process. In this process, the aluminium is forced to pass through a die with the desired shape, thus...
€1.15 (tax excl.)
€1.39 (tax incl.)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...

Menu

Settings