Click for more products.
No products were found.

CX TIMING BELT

CX timing belt

The combination of the trapezoidal profile and the teeth ensures power transmission with minimal slip losses.

The synchronization between the motor and driven shafts is very precise, making it ideal for applications requiring synchronized movement.

Common applications: Industrial machinery, Agricultural equipment, Automobiles.

Technical specifications:

  • Standard according to ISO-4183 ISO-4184 DIN-2215
  • Manufactured according to BS 3790 standard, RMA IP-22 and RMA IP-23.
  • Temperature range -18ºC / 100ºC
  • Maximum linear speed 30 m/sec.
  • Oil resistance
  • Antistatic.

IF YOU CAN'T FIND THE SIZE YOU NEED, CONTACT US.

Read moreShow less
€26.40 (tax incl.)
€21.82 (tax excl.)
STRAP MEASUREMENT
Reference:
5262000
Description

CX timing belt

Read moreShow less
Product Details
5262000
Comments (0)
8 other products in the same category:
€10.50 (tax excl.)
€12.71 (tax incl.)
T10 polyurethane toothed flat belt Main features: Strap width: 16, 25, 32 or 50 mm (See other sizes). It is made of high-quality polyurethane with steel and aramid cables. Very good wear resistance, chemical...
€23.13 (tax excl.)
€27.99 (tax incl.)
Trapezoidal pulley 2 groove taper SPA-XPA-A It is necessary to transmit power using two trapezoidal belts with SPA-XPA-A profile. This type of pulley has two parallel "V" shaped grooves where two trapezoidal belts...
€61.52 (tax excl.)
€74.44 (tax incl.)
5 groove trapezoidal pulley taper SPA-XPA-A. A 5-groove taper SPA trapezoidal pulley is a mechanical component designed to transmit power efficiently and robustly using five SPA-XPA-A profile trapezoidal belts. The...
€60.87 (tax excl.)
€73.65 (tax incl.)
XPC Timing Belt Technical specifications: Standard according to ISO-4183 ISO-4184 DIN-2215 Manufactured according to BS3790 Temperature range -18ºC / 100ºC Maximum linear speed 30 m/sec. Oil resistance Antistatic. IF...
€5.32 (tax excl.)
€6.44 (tax incl.)
The V-belt B is designed to transmit motion and power between pulleys in industrial machinery. Applications: Agricultural machinery, Automotive industry, Industrial machinery or Transportation systems. Technical...
€13.28 (tax excl.)
€16.07 (tax incl.)
A perforated V-belt is a variation of the traditional V-belt, designed with holes or perforations along its length. These perforations allow for better dissipation of the heat generated by friction, extending the...
€4.75 (tax excl.)
€5.75 (tax incl.)
AX timing belt The AX timing belt has exceptional effectiveness when installed on pulleys with extremely small diameters, high speed and high power transmission requirements. It is characterized by its narrow,...
€52.63 (tax excl.)
€63.68 (tax incl.)
The D-belt is a power transmission element designed for industrial applications that require high transmission capacity and reliable, continuous operation. Typical applications: Industrial machinery, Agriculture,...
Recently Viewed
€26.40 (tax incl.)
€21.82 (tax excl.)
CX timing belt The combination of the trapezoidal profile and the teeth ensures power transmission with minimal slip losses. The synchronization between the motor and driven shafts is very precise, making it ideal for...
€75.03 (tax excl.)
€90.79 (tax incl.)
A lateral NG-10 base plate serves as a mounting and connection interface for solenoid valves and other NG-10 (CETOP 5) sized hydraulic components. Connection ports for hydraulic lines are located on the sides of the...
€266.00 (tax excl.)
€321.86 (tax incl.)
A rectangular manhole is a closed-cover opening that allows access for a person or tool to the inside of a tank or equipment to perform internal work without having to disassemble large parts of the system....
€443.00 (tax excl.)
€536.03 (tax incl.)
The volumetric grease pump is intended for feeding single-line lubrication systems with volumetric metering valves. Applications: Industrial machinery, Centralized lubrication systems, Agricultural equipment Main...
€11.20 (tax excl.)
€13.55 (tax incl.)
A 1/8" - 1/4" valve base plate is essential for pneumatic systems. It serves as a platform for neatly and securely mounting and connecting various valves, such as manifolds, regulators, and filters. It is often used...
€24.00 (tax excl.)
€29.04 (tax incl.)
A Ø100 pressure gauge with 1/2" rear thread and glycerin is an industrial instrument used to measure and display the relative pressure in a system, designed for high visibility and resistance to adverse operating...

Menu

Settings