Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
VALVE 5/3 CLOSED CENTER VC14 1501C00007
VALVE 5/3 CLOSED CENTER VC14 1501C00007
VALVE 5/3 CLOSED CENTER VC14 1501C00007
VALVE 5/3 CLOSED CENTER VC14 1501C00007
VALVE 5/3 CLOSED CENTER VC14 1501C00007
VALVE 5/3 CLOSED CENTER VC14 1501C00007

VALVE 5/3 CLOSED CENTER VC14 1501C00007

A 5/3 closed center valve VC14 1501C00007

Technical sheet:

  • Sub-D multipolar integrated system
  • Simplicity and versatility of assembly and wiring.
  • Double electropilot, housed on the same side, reducing the size of the battery.
  • Wide range of valves and modules, threads and pitches.
  • Possibility of mounting up to 20 bistable solenoid valves in the same block (40 signals)
  • Multipolar connector 25 pin from 2 to 10 valve positions or 44 pin from 2 to 20 valve positions.
  • Protection degree IP-40 in 25 pin or IP-65 in 25 and 44 pins
  • Voltage 24V DC Power 1.3 W
  • PNP electrical configuration
  • Working temperature -5ºC / 50ºC
  • Working pressure Vacuum -1 / 10 bar.
€85.91 (tax included)
€71.00 (tax excl.)
SELECT THE THREAD
  • 1/4"
  • Ø 6
  • Ø 8
Reference:
57060009
Description

valve 5/3 closed center VC14 1501C00007

Product Details
57060009
Comments
12 other products in the same category:
5/2 MONOSTABLE VALVE VA14 1501C00001

€49.00 (tax excl.)
€59.29 (tax included)
A 5/2 monostable valve VA14 1501C00001 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
BLIND MODULE MS

€8.20 (tax excl.)
€9.92 (tax included)
An MS blanking module is a component used in structured cabling systems, specifically in patch panels or junction boxes, with the primary function of occupying an unused space or port, preventing the entry of dust,...
SUPPLEMENTARY MODULE MR14 1501C00026

€18.00 (tax excl.)
€21.78 (tax included)
Sub-D multipolar integrated system separate feeding supplement module. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side, reducing the size of the battery. Wide range of...
MULTIPOLAR BASE MODULE 2 POSITIONS

€35.00 (tax excl.)
€42.35 (tax included)
A 2-position multipole base module is used to control two 150 series solenoid valves simultaneously. Each position is equipped with two electrical signals, allowing the solenoid valves to be connected and controlled...
CLOSING CAP MODULES 1531C00010

€2.56 (tax excl.)
€3.10 (tax included)
A 1531C00010 module closure plug is essential in electrical or electronic systems. Its main function is to close and seal a port or connection. It prevents dust particles, moisture, or any other contaminants from...
VALVE 5/2 DOUBLE VB14 1501C00004

€63.00 (tax excl.)
€76.23 (tax included)
A 5/2 bistable valve VB14 1501C00004 is a pneumatic control valve used in Sub-D multipole integrated systems. It features 5 ports (2 inlet, 2 outlet, and 1 exhaust) and 2 stable operating positions (bistable)....
VALVE 5/3 PRESSURE CENTER VF14 1501C00016

€83.00 (tax excl.)
€100.43 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
VALVE 3/2 NC + 3/2 NO VD14 1501C00010

€82.00 (tax excl.)
€99.22 (tax included)
One valve 3/2 NC + 3/2 NO VD14 1501C00010 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
VALVE 5/3 CENTER TO EXHAUST VE14 1501C00013

€83.00 (tax excl.)
€100.43 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of mounting and wiring. Double electropilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
LEG FIXING KIT 1601C000017

€8.50 (tax excl.)
€10.29 (tax included)
A 1601C000017 leg fixing kit is a set of components for securing or mounting a SIM-150 multipolar integrated system. This kit includes brackets and screws that allow you to anchor, level and stabilize the SIM-150...
LEFT MULTIPOLE COVER 44 PINS TI 1501C000124

€32.00 (tax excl.)
€38.72 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
MULTIPOLAR COVER TI LEFT 25 PIN 1501C00123

€41.92 (tax excl.)
€50.72 (tax included)
Sub-D multipolar integrated system Simplicity and versatility of mounting and wiring. Double electropilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...
Recently Viewed
VALVE 5/3 CLOSED CENTER VC14 1501C00007

€85.91 (tax included)
€71.00 (tax excl.)
A 5/3 closed center valve VC14 1501C00007 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...
XPB TIMING BELT

€20.58 (tax excl.)
€24.90 (tax included)
XPB Timing Belt It combines the characteristics of trapezoidal belts and toothed belts. Technical specifications: Standard according to ISO-4183 ISO-4184 DIN-2215 Manufactured according to BS3790 Temperature range...
SEMI-FAST NUT

€0.34 (tax excl.)
€0.41 (tax included)
Maximum pressure: 15 bar (1.5 MPa) Minimum temperature: -20° C Maximum temperature: +80° C The fittings are available for the following measurements: Tubes: from 4/2.7 to 15/12.5; Threads: 1/8 to 1/2.
JIC MALE PLUG

€1.24 (tax excl.)
€1.50 (tax included)
A JIC male plug is used to securely and watertightly close or seal a female JIC port or connection. Common applications: Hydraulic systems in heavy machinery, Construction and mining equipment, High pressure systems...
Z-BELT

€3.61 (tax excl.)
€4.37 (tax included)
Z-belt The Z trapezoidal belt stands out for its high mechanical resistance and good working conditions at high and low temperatures. Suitable for all industrial sectors, especially: Agricultural machinery, Industrial...

Menu

Please sign in first.

Sign in