CLOSING CAP MODULES 1531C00010

A 1531C00010 module closure plug is essential in electrical or electronic systems. Its main function is to close and seal a port or connection. It prevents dust particles, moisture, or any other contaminants from entering. It provides electrical insulation, preventing short circuits or current leaks.

Technical sheet:

Sub-D multipolar integrated system
Simplicity and versatility of assembly and wiring.
Double electropilot, housed on the same side, reducing the size of the battery.
Wide range of valves and modules, threads and pitches.
Possibility of mounting up to 20 bistable solenoid valves in the same block (40 signals)
Multipolar 25-pin connector for 2 to 10 valve positions. Or 44-pin connector for 2 to 20 valve positions.
Protection degree IP-40 in 25 pin or IP-65 in 25 and 44 pins
Voltage 24V DC
Power 1.3 W
PNP electrical configuration
Working temperature -5ºC / 50ºC
Working pressure Vacuum -1 / 10 bar.

€3.10 (tax included)

€2.56 (tax excl.)

Reference:

5714

Description
Comments

Description

Module closing cap 1531C00010

Product Details

Reference 5714

Comments

12 other products in the same category:

BLIND MODULE MS

€8.20 (tax excl.)

€9.92 (tax included)

An MS blanking module is a component used in structured cabling systems, specifically in patch panels or junction boxes, with the primary function of occupying an unused space or port, preventing the entry of dust,...

POWER CABLE 44 PIN IP-65 1601C000014

€158.00 (tax excl.)

€191.18 (tax included)

44-pin IP-65 power cable for integrated multipolar Sub-D system Choice between 3 cable lengths: 3.5 or 10 meters. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side,...

LEFT MULTIPOLE COVER 44 PINS TI 1501C000124

€32.00 (tax excl.)

€38.72 (tax included)

Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side, reducing the size of the battery. Wide range of valves and modules, threads and...

MULTIPOLAR BASE MODULE 2 POSITIONS

€35.00 (tax excl.)

€42.35 (tax included)

A 2-position multipole base module is used to control two 150 series solenoid valves simultaneously. Each position is equipped with two electrical signals, allowing the solenoid valves to be connected and controlled...

5/2 MONOSTABLE VALVE VA14 1501C00001

€49.00 (tax excl.)

€59.29 (tax included)

A 5/2 monostable valve VA14 1501C00001 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...

POWER CABLE 25 PIN IP-65 1601C00006

€117.00 (tax excl.)

€141.57 (tax included)

25-pin IP-65 power cable for integrated multipolar Sub-D system Choice between 3 cable lengths: 3.5 or 10 meters. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side,...

LEG FIXING KIT 1601C000017

€8.50 (tax excl.)

€10.29 (tax included)

A 1601C000017 leg fixing kit is a set of components for securing or mounting a SIM-150 multipolar integrated system. This kit includes brackets and screws that allow you to anchor, level and stabilize the SIM-150...

SUPPLEMENTARY MODULE MR14 1501C00026

€18.00 (tax excl.)

€21.78 (tax included)

Sub-D multipolar integrated system separate feeding supplement module. Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side, reducing the size of the battery. Wide range of...

VALVE 5/3 PRESSURE CENTER VF14 1501C00016

€83.00 (tax excl.)

€100.43 (tax included)

VALVE 5/3 CLOSED CENTER VC14 1501C00007

€71.00 (tax excl.)

€85.91 (tax included)

A 5/3 closed center valve VC14 1501C00007 Technical sheet: Sub-D multipolar integrated system Simplicity and versatility of assembly and wiring. Double electropilot, housed on the same side, reducing the size of the...

POWER CABLE 25 PIN IP-40 1601C000002

€98.00 (tax excl.)

€118.58 (tax included)

Multipolar Sub-D 25 PIN Integrated System Power Cable Choice of 3 cable lengths: 3.5 or 10 meters Simplicity and versatility of assembly and wiring. Double electric pilot, housed on the same side, reducing the size of...

DIN RAIL FIXING KIT

€7.72 (tax excl.)

€9.34 (tax included)

A DIN rail mounting kit is a set of components designed to ensure the correct and stable installation of devices and equipment on a DIN rail. It includes mounting brackets and mounting screws. They are essential for...