Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
220V ELECTROHYDRAULIC RADIAL PRESS

220V ELECTROHYDRAULIC RADIAL PRESS

A 220V electrohydraulic radial press is used to make radial joints in pipes and fittings. These joints are achieved by circumferentially compressing a sleeve or ring onto the pipe and fitting.

Applications: plumbing, heating, gas and air conditioning installations.

Technical sheet:

  • Supplied without clamps.
  • Pressed up to Ø 110 depending on the accessory.
  • Pressing cycle control.
  • Security lock.
  • Emergency switch.
  • 5 mt cable.
  • Feed force 32 kN
  • Power supply 220 V.
  • Ergonomic, thanks to the rubber handle and balanced weight distribution.
€1,694.00 (tax included)
€1,400.00 (tax excl.)
Reference:
5823
Description

220V electrohydraulic radial press

Product Details
5823
Comments
12 other products in the same category:
STAINLESS STEEL PRESS MALE ADAPTER

€5.32 (tax excl.)
€6.44 (tax included)
A stainless steel male press adapter is used to connect a pipe system with a press connection to another component or system that uses a male threaded connection. Technical sheet: INOX-316 fitting for pressing....
3-PIECE PRESS STAINLESS STEEL FITTING

€14.64 (tax excl.)
€17.71 (tax included)
A 3-piece stainless steel press fitting is used in piping systems that require high corrosion resistance and secure connections, especially in sanitary and industrial applications. It facilitates pipe assembly and...
VITON FKM GASKET

€0.95 (tax excl.)
€1.15 (tax included)
The Viton FKM gasket is characterized by its exceptional resistance to high temperatures, a wide variety of chemicals and abrasion. Variety of applications: automotive industry, chemical industry, aerospace, food...
90º CURVE M-H PRESS INOX

€3.99 (tax excl.)
€4.83 (tax included)
A 90º MH press inox bend is a pipe fitting, especially for installations where high corrosion resistance and a tight seal are required. Its function is to change the direction of fluid flow at a 90º angle....
45º CURVE H-H PRESS INOX

€4.80 (tax excl.)
€5.81 (tax included)
A 45° HH press stainless steel bend is used to change the direction of the pipe at a 45° angle. Both fitting connections are female threads. Applications: food industry, pharmaceutical industry, chemical industry,...
INOX-316 PIPE

€19.47 (tax excl.)
€23.56 (tax included)
An Inox-316 pipe is a cylindrical conduit made from stainless steel. Its smooth, non-porous surface prevents the accumulation of bacteria and microorganisms. It is a material highly resistant to wear and high...
STAINLESS STEEL PRESS FEMALE THREAD TUBE UNION

€7.46 (tax excl.)
€9.03 (tax included)
A stainless steel female threaded press pipe union allows sections of pipe to be joined. Applications: drinking water installations, heating and cooling systems, solar applications, compressed air systems,...
45º M-H CURVE PRESS INOX

€3.73 (tax excl.)
€4.51 (tax included)
A 45° MH press stainless steel bend is a pipe fitting that allows fluid flow to be changed at a 45° angle. It has a male connection at one end and a female connection at the other, both designed for the press-fit...
90º H-H CURVE PRESS INOX

€4.39 (tax excl.)
€5.31 (tax included)
A 90º HH press inox bend is a pipe fitting designed to make a 90º turn in a pipe line. Typical applications: Sanitary installations, Heating systems, Food industry, Chemical industry and Naval sector. Technical sheet:...
UNION TUBE FEMALE THREAD SWIVEL PRESS INOX

€9.85 (tax excl.)
€11.92 (tax included)
A press stainless steel swivel female thread pipe union is designed to flexibly and securely connect a pipe with a female thread to another component. It allows for a certain amount of rotation, facilitating the...
STAINLESS STEEL PRESS CAP

€4.52 (tax excl.)
€5.47 (tax included)
A stainless steel press plug is used to seal or close the end of a pipe or fitting, made of stainless steel and designed for piping systems that use "push-in" connections. Applications: Food and beverage industry,...
EPDM PRESS FITTING GASKET

€0.21 (tax excl.)
€0.25 (tax included)
An EPDM press-fit gasket is a replacement for stainless steel fittings with a press connection. Its function is to create a durable, airtight seal between the fitting and the pipe, preventing fluid or gas leaks....
Recently Viewed
220V ELECTROHYDRAULIC RADIAL PRESS

€1,694.00 (tax included)
€1,400.00 (tax excl.)
A 220V electrohydraulic radial press is used to make radial joints in pipes and fittings. These joints are achieved by circumferentially compressing a sleeve or ring onto the pipe and fitting. Applications: plumbing,...
BUTTON SILENCER

€0.78 (tax excl.)
€0.94 (tax included)
Button mute It is a pneumatic component designed to reduce the noise generated by the escape of compressed air in a pneumatic system. It is installed in-line in the pneumatic circuit, usually at the outlet of the...
ELASTIC COUPLING GR-1

€15.14 (tax excl.)
€18.32 (tax included)
The GR-1 elastic coupling is a coupling system for connecting pairs of shafts. It connects two shafts, allowing power transmission between them and absorbing vibrations, misalignments, and shocks. Its design...
3/4" SPROCKET

€10.22 (tax excl.)
€12.37 (tax included)
3/4" pinion Technical sheet: Standard toothed pinion made of F-114 steel, blued, black. Dimensions and finish according to DIN-8187 ISO R606 standard They are served with a through hole. Possibility of selecting...
1/8" RUBBER NOZZLE

€1.60 (tax excl.)
€1.94 (tax included)
A 1/8" rubber nozzle is used in pneumatic and fluid systems. The 1/8" measurement refers to the diameter of the threaded connection. Applications: Blow guns, Lubrication equipment, Cooling systems and Laboratory...
ELEVATED FLANGE FOR RGB PUMP

€15.01 (tax excl.)
€18.16 (tax included)
The RGB pump elbow flange is used to connect an RGB hydraulic pump to other components of a hydraulic system. This can be useful in applications where space is limited or where the pump needs to be installed in a...

Menu

Please sign in first.

Sign in