Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
EPDM PRESS FITTING GASKET
EPDM PRESS FITTING GASKET
EPDM PRESS FITTING GASKET
EPDM PRESS FITTING GASKET

EPDM PRESS FITTING GASKET

An EPDM press-fit gasket is a replacement for stainless steel fittings with a press connection. Its function is to create a durable, airtight seal between the fitting and the pipe, preventing fluid or gas leaks.

Applications: Drinking water installations, heating and air conditioning systems, compressed air lines, fire protection systems, installations in the refrigeration sector.

Technical sheet:

  • Temperature -30ºC to +110ºC
  • Ideal for hot water and steam
  • Good electrical insulator
€0.25 (tax included)
€0.21 (tax excl.)
DIAMETERS
  • Ø 15
  • Ø 18
  • Ø 22
  • Ø 28
  • Ø 35
  • Ø 42
  • Ø 54
Reference:
58200016
Description

EPDM press fitting gasket

Product Details
58200016
Comments
Related products
45º M-H CURVE PRESS INOX 45º M-H CURVE PRESS INOX

€3.73 (tax excl.)
€4.51 (tax included)
A 45° MH press stainless steel bend is a pipe fitting that allows fluid flow to be changed at a 45° angle. It has a male connection at one end and a female connection at the other, both designed for the press-fit...
YOU EQUAL PRESS INOX YOU EQUAL PRESS INOX

€7.05 (tax excl.)
€8.53 (tax included)
A stainless steel equal tee allows the flow of a fluid to be divided into two equal branches. The connection to the pipes is made by pressing, ensuring a tight and durable joint. Typical applications: Sanitary...
3-PIECE PRESS STAINLESS STEEL FITTING 3-PIECE PRESS STAINLESS STEEL FITTING

€14.64 (tax excl.)
€17.71 (tax included)
A 3-piece stainless steel press fitting is used in piping systems that require high corrosion resistance and secure connections, especially in sanitary and industrial applications. It facilitates pipe assembly and...
STRAIGHT H-H JOINT STRAIGHT H-H JOINT

€2.98 (tax excl.)
€3.61 (tax included)
A straight HH union is a connector used in piping systems, designed to join two pipes in a straight line using a press connection system. Technical sheet: INOX-316 fitting for pressing. Available tube diameters...
12 other products in the same category:
45º M-H CURVE PRESS INOX

€3.73 (tax excl.)
€4.51 (tax included)
A 45° MH press stainless steel bend is a pipe fitting that allows fluid flow to be changed at a 45° angle. It has a male connection at one end and a female connection at the other, both designed for the press-fit...
STAINLESS STEEL FEMALE PRESS ADAPTER

€5.59 (tax excl.)
€6.76 (tax included)
A stainless steel female press adapter is a type of pipe fitting designed to connect a press-fit piping system to another component or system that uses a female threaded connection. Technical sheet: INOX-316 fitting...
90º H-H CURVE PRESS INOX

€4.39 (tax excl.)
€5.31 (tax included)
A 90º HH press inox bend is a pipe fitting designed to make a 90º turn in a pipe line. Typical applications: Sanitary installations, Heating systems, Food industry, Chemical industry and Naval sector. Technical sheet:...
90º MALE PRESS STAINLESS STEEL TUBE ELBOW

€8.66 (tax excl.)
€10.48 (tax included)
A 90º male press stainless steel pipe elbow is a pipe fitting that allows the direction of fluid flow to be changed by 90º. This type of elbow is used in a wide variety of applications, including sanitary...
220V ELECTROHYDRAULIC RADIAL PRESS

€1,400.00 (tax excl.)
€1,694.00 (tax included)
A 220V electrohydraulic radial press is used to make radial joints in pipes and fittings. These joints are achieved by circumferentially compressing a sleeve or ring onto the pipe and fitting. Applications: plumbing,...
REDUCED TEA PRESS INOX

€7.99 (tax excl.)
€9.67 (tax included)
A stainless steel press reducing tee is used in piping systems that require high corrosion resistance and secure joints, especially in sanitary and industrial applications. Applications: Food industry, Pharmaceutical...
M-H PRESS INOX REDUCTION

€4.13 (tax excl.)
€5.00 (tax included)
An MH press stainless steel reducer is a type of fitting used in piping systems to connect two pipes of different diameters. A larger diameter pipe is always connected to a smaller diameter pipe. Common applications:...
STAINLESS STEEL PRESS FEMALE THREAD TUBE UNION

€7.46 (tax excl.)
€9.03 (tax included)
A stainless steel female threaded press pipe union allows sections of pipe to be joined. Applications: drinking water installations, heating and cooling systems, solar applications, compressed air systems,...
STAINLESS STEEL ARCH

€3.00 (tax excl.)
€3.63 (tax included)
A stainless steel eyebolt is a fastening element made of stainless steel. Its purpose is to hold and anchor pipes, tubes, cables, or conduits to structures, profiles, supports, or surfaces. Applications: Industrial...
STAINLESS STEEL PRESS CAP

€4.52 (tax excl.)
€5.47 (tax included)
A stainless steel press plug is used to seal or close the end of a pipe or fitting, made of stainless steel and designed for piping systems that use "push-in" connections. Applications: Food and beverage industry,...
CENTRAL FEMALE TUBE PRESS INOX

€8.12 (tax excl.)
€9.83 (tax included)
A stainless steel press-fit female center pipe tee is distinguished by its female branch connection, unlike the other two ends, which are press-fit. It allows the connection of three pipe sections, with one section...
STAINLESS STEEL PRESS MALE ADAPTER

€5.32 (tax excl.)
€6.44 (tax included)
A stainless steel male press adapter is used to connect a pipe system with a press connection to another component or system that uses a male threaded connection. Technical sheet: INOX-316 fitting for pressing....
Recently Viewed
EPDM PRESS FITTING GASKET

€0.25 (tax included)
€0.21 (tax excl.)
An EPDM press-fit gasket is a replacement for stainless steel fittings with a press connection. Its function is to create a durable, airtight seal between the fitting and the pipe, preventing fluid or gas leaks....
BITUBO POLYURETHANE SPIRAL

€20.00 (tax excl.)
€24.20 (tax included)
It is made with 98 SH-A polyurethane tube.   Ideal for mounting in automation systems with translational movements. Straight ends. Standard color combination: blue – black. Supplied without fittings. Working...
AND REDUCED MINIATURE

€2.84 (tax excl.)
€3.44 (tax included)
Acetal resin body. Metal parts in nickel-plated brass.Ideal for micropneumatic assemblies.40% reduction compared to a conventional fitting.Elliptical push button: Easy disassembly without tools.Maximum working...
FIG. 280 GALVANIZED MACHON

€0.92 (tax excl.)
€1.11 (tax included)
Union threads according to ISO 7/1 (DIN 2999 / BS 21) Clamping threads according to ISO 228/1 Nominal diameter dn under ISO 6708 Dimensions according to ISO 49 & DIN 2950 Manufactured under UNE EN 10242 standard...
INLINE FLOW REGULATOR

€6.60 (tax excl.)
€7.99 (tax included)
Unidirectional. High precision regulators. Tube-tube regulation. Possibility of mounting several regulators in parallel. Acetal resin body. Metal parts in nickel-plated brass.
1" SPROCKET

€16.53 (tax excl.)
€20.00 (tax included)
1" Sprocket Technical sheet: Standard toothed pinion made of F-114 steel, blued, black. Dimensions and finish according to DIN-8187 ISO R606 standard They are served with a through hole. Possibility of selecting...

Menu

Please sign in first.

Sign in