Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
AND REDUCED MINIATURE

AND REDUCED MINIATURE

  • Acetal resin body. Metal parts in nickel-plated brass.
  • Ideal for micropneumatic assemblies.
  • 40% reduction compared to a conventional fitting.
  • Elliptical push button: Easy disassembly without tools.
  • Maximum working pressure 16 bar.
  • Vacuum pressure: -760 mm Hg (10 Torr).
  • Temperature -15 / 70ºC


€3.44 (tax included)
€2.84 (tax excl.)
DIAMETERS
  • Ø3-Ø4
  • Ø4-Ø6
Reference:
37160038
Description

Y REDUCIDA

Product Details
37160038
Comments
12 other products in the same category:
BANJO 90º BALL FOR BRAKE PIPE

€4.24 (tax excl.)
€5.13 (tax included)
A 90° banjo fitting for brake lines is a specific type of hydraulic fitting used in vehicle brake systems. Its function is to securely and leak-free connect a brake line or pipe to a brake system component at a 90°...
SUPPLEMENT AND MINIATURE REDUCTION

€2.84 (tax excl.)
€3.44 (tax included)
A miniature Y-shaped fitting allows you to join sections of pipe or hose, or to connect equipment to a piping network. Its function is to ensure a tight and secure connection, allowing the flow of a fluid (water, gas,...
IDENTIFICATION RING

€3.40 (tax excl.)
€4.11 (tax included)
Identification ring It is used to be placed on an electrical socket or connector and to identify it visually. Its function is to organize and label sockets in complex electrical systems, such as control panels,...
T-FITTING FOR BRAKE PIPE

€19.25 (tax excl.)
€23.29 (tax included)
A brake line tee fitting is a fitting used in vehicle braking systems (cars, motorcycles, etc.) to divide or join the flow of brake fluid through three lines. Applications: Automotive braking systems, Motorcycle...
BANJO 60º BALL FOR BRAKE PIPE

€5.01 (tax excl.)
€6.06 (tax included)
A 60° banjo ball brake line fitting is a specific type of hydraulic fitting used in vehicle brake systems. Applications: Automotive and motorcycle braking systems and industrial braking systems Technical sheet:...
90º SWIVEL NUT 1/8" FOR BRAKE PIPE

€7.26 (tax excl.)
€8.78 (tax included)
A 1/8" 90º brake line swivel nut is an essential component in hydraulic braking systems, especially on motorcycles and some industrial vehicles. It allows the brake line to be connected to the brake caliper or other...
EXTENDED MALE PLUG

€7.60 (tax excl.)
€9.20 (tax included)
Extended male plug It is used to join two components, usually tubes or fittings. It stands out for its greater length than a standard male plug. Applications: Pneumatics, Hydraulics, Food industry, Industrial...
AND MINIATURE TUBE

€2.62 (tax excl.)
€3.17 (tax included)
A miniature Y tube is a type of connection or fitting designed to join two or more tubes of very small dimensions. Common Applications: Instrumentation, Laboratories, Medical Devices, Electronics, Microfluidics,...
25º SIDE BANJO BALL FOR BRAKE PIPE

€4.24 (tax excl.)
€5.13 (tax included)
A 25° lateral banjo brake line fitting is a specific type of fitting used in brake systems, designed to connect a brake hose or tube to a component in an articulated manner and with a particular direction....
STRAIGHT BALL BANJO FOR BRAKE PIPE

€3.58 (tax excl.)
€4.33 (tax included)
A straight banjo fitting is a fitting used in hydraulic brake systems. Its function is to securely and flexibly connect the sections of tubing that make up the brake fluid circuit. Applications: Vehicle braking...
MINIATURE THREADED PIPE ELBOW UNION

€2.01 (tax excl.)
€2.43 (tax included)
Miniature instant fitting elbow pipe thread Acetal resin body. Metal parts in nickel-plated brass. Ideal for micropneumatic assemblies. Reduced by 40% compared to a conventional fitting. Elliptical push button: Easy...
MINI TE MALE SIDE MINIATURE

€3.47 (tax excl.)
€4.20 (tax included)
A miniature male side mini tee is a small connector for low-pressure fluid or pneumatic systems that requires a "T" shaped connection. It has a male side thread. Applications: Miniaturized pneumatic systems, Miniature...
Recently Viewed
AND REDUCED MINIATURE

€3.44 (tax included)
€2.84 (tax excl.)
Acetal resin body. Metal parts in nickel-plated brass.Ideal for micropneumatic assemblies.40% reduction compared to a conventional fitting.Elliptical push button: Easy disassembly without tools.Maximum working...
5/2 1/4" PEDAL WITHOUT PROTECTION

€41.30 (tax excl.)
€49.97 (tax included)
The 5/2 1/4" unprotected foot pedal is used to control the flow of compressed air in pneumatic systems. It is ideal for applications where direct manual actuation and fast response are required. Applications:...
SINGLE PHASE ELECTRIC ACTUATOR 12V DC

€200.00 (tax excl.)
€242.00 (tax included)
Single-phase 12V electric actuator used to generate load movement or any action that requires force.  90º rotation design (optionally 180º - 270º) Incorporates thermal temperature control. Electrical torque control....
BRASS HOLLOW CONE NOZZLE 10 L/min

€12.00 (tax excl.)
€14.52 (tax included)
A 10 L/min brass hollow cone nozzle is used to atomize liquids, creating a hollow cone shaped spray pattern. Applications: Foam removal, washing and rinsing, dust treatment, cleaning, cooling, shut-off,...
THREADED FILLER CAP

€6.15 (tax excl.)
€7.44 (tax included)
THREADED FILLER CAP A filler cap is used in various mechanical and fluid systems to fill oil reservoirs. It also acts as a vent to prevent pressure buildup. Chrome handle. Threads available from 1/4" to 1"
JIC MALE-MALE FITTING

€1.37 (tax excl.)
€1.66 (tax included)
A JIC male-to-male fitting is a hydraulic fitting used to join two components or hoses that have a JIC female connection. Applications: Hydraulic Systems, Industrial Machinery, Mobile Equipment, Hose Connection....

Menu

Please sign in first.

Sign in