Click for more products.
No produts were found.
Click for more products.
No produts were found.

SPEED REGULATOR FOR NAMUR ACTUATORS

The speed regulator for NAMUR actuators is designed for use in controlling the opening and closing speed of pneumatic actuators. It can be mounted directly to a pneumatic actuator or used with a Namur solenoid valve (5/2).

Applications: Chemical and petrochemical industry, Food and beverage industry, Water treatment and Industrial automation.

Technical sheet:

  • Direct mounting between actuator and NAMUR 5/2 solenoid valve.
  • Aluminum body.
  • IP-67 protection
  • Temperature -20 / 80ºC
  • Working pressure: 1.5 - 8 BAR
€56.63 (tax included)
€46.80 (tax excl.)
Reference:
5117
Description

Speed controller for NAMUR actuators

REGULADOR VELOCIDAD PARA NAMUR

Product Details
5117
Comments
Related products
€15.00 (tax excl.)
€18.15 (tax included)
THREADED ADAPTER FOR NAMUR REGULATOR Adapter or threaded plate for mounting on flow regulators in NAMUR standard actuators 1/4" Female Thread It comes with screws and O-rings.
12 other products in the same category:
€386.00 (tax excl.)
€467.06 (tax included)
A kinetrol 074-100 double-acting pneumatic actuator is a mechanical device that uses the energy of compressed air to generate rotary motion and operate a quarter-turn valve (such as a ball or butterfly valve)....
€106.74 (tax excl.)
€129.16 (tax included)
The double-acting actuator with a 3-way T-shaped stainless steel valve is used to control the flow of a fluid (usually air or liquid) through a 3-way T-shaped valve. The valve, made of stainless steel, guarantees high...
€107.64 (tax excl.)
€130.24 (tax included)
A double-acting cast wafer disc butterfly valve is used to control fluid flow in pipelines. The actuator is used to open and close the valve. Applications: Water and wastewater treatment systems, HVAC systems, General...
€295.00 (tax excl.)
€356.95 (tax included)
A kinetrol 054-100 double-acting pneumatic actuator is a mechanical device that uses the energy of compressed air to generate rotary motion and operate a quarter-turn valve (such as a ball or butterfly valve)....
€39.13 (tax excl.)
€47.35 (tax included)
A NAMUR electrical connection distributor is used to connect and disconnect a pneumatic actuator to an electrical power source. It is used in a wide range of applications such as industrial machines, transportation...
€80.81 (tax excl.)
€97.78 (tax included)
pneumatically actuated linear flow buffer valve Its compact design allows for reduced dimensions. Full range from 3/8" to 2 1/2" and in DOUBLE EFFECT. Possibility of incorporating an external indicator (sensor)...
€47.84 (tax excl.)
€57.89 (tax included)
A closed stainless steel angle seat valve N. works to control the flow of fluids (liquids or gases) in pneumatic, hydraulic or general fluid systems. In the rest state, the valve is closed and an external signal...
€15.00 (tax excl.)
€18.15 (tax included)
THREADED ADAPTER FOR NAMUR REGULATOR Adapter or threaded plate for mounting on flow regulators in NAMUR standard actuators 1/4" Female Thread It comes with screws and O-rings.
€71.76 (tax excl.)
€86.83 (tax included)
Normally closed buffer valve. It serves to activate the passage of fluids through the action of air. Linear bore pneumatically actuated valve with plug closure. Its compact design allows dimensions to be reduced....
€116.53 (tax excl.)
€141.00 (tax included)
Single acting pneumatic actuator. It is used for the control and regulation of butterfly, ball, gate valves, etc., with different maneuvers and diameters between DN 15 and DN 1000. External regulation of the opening...
€94.19 (tax excl.)
€113.97 (tax included)
A 2-piece stainless steel valve with a single-acting actuator uses compressed air to perform one action (open or close) and a spring for the opposite action. Applications: Piping systems in chemical, petrochemical,...
€312.00 (tax excl.)
€377.52 (tax included)
An ATEX limit switch with 2 inductive detectors is a safety device that detects the presence of metallic objects in environments with risk of explosion (ATEX). It is mainly used in industrial applications where it is...
Recently Viewed
€56.63 (tax included)
€46.80 (tax excl.)
The speed regulator for NAMUR actuators is designed for use in controlling the opening and closing speed of pneumatic actuators. It can be mounted directly to a pneumatic actuator or used with a Namur solenoid valve...
€0.83 (tax excl.)
€1.00 (tax included)
A DIN 2353 L sealing plug is used to securely and hermetically close or block the end of a fitting or port that complies with the DIN 2353 standard, specifically the L series. It prevents fluid (liquid or gas) leaks...
€0.30 (tax excl.)
€0.36 (tax included)
A copper washer is designed to create a tight, deformable seal under compression, making it indispensable in joints where excellent tightness, conductivity, and corrosion resistance are required under specific...
€155.40 (tax excl.)
€188.03 (tax included)
The OR Roller Vibrator is characterized by the reduction or elimination of friction thanks to high frequency and high centrifugal forces. At the same time, the vibrators are completely insensitive to resonance....

Menu