Click for more products.
No products were found.

PLUG FOR FITTING

rating Read the review

A fitting plug is a pneumatic accessory designed to securely close and seal the outlet of a fitting or pneumatic line that uses a quick-connect fitting.

Main features:

  • Working pressure -0.99 / 10 bar.
  • Temperature 0 /- 60ºC.
  • Wide range of Ø 4-16
  • Ease of connection
  • Cylindrical or tapered thread
  • Body in nickel-plated brass and PBT
  • Stainless steel gripping clamp (301)
  • POM resin push ring
Read moreShow less
€0.53 (tax incl.)
€0.44 (tax excl.)
DIAMETERS
  • Ø 4
  • Ø 6
  • Ø8
  • Ø 10
  • Ø 12
  • Ø 14
  • Ø 16
Reference:
30280001
Description

Plug for fitting

A fitting plug is a pneumatic accessory designed to securely close and seal the outlet of a fitting or pneumatic line that uses a quick-connect fitting.

Its main function is to block the passage of compressed air , preventing leaks and allowing the system to be kept pressurized or to isolate a part of the circuit when it is not in use or during maintenance tasks.

Common applications

  • Closure of unused pneumatic lines
  • Branch isolation during maintenance
  • Protection of free fitting outlets
  • Configuration and modification of compressed air circuits

Technical specifications for a plug for an instant fitting:

TAPON TUBO MACHO

Read moreShow less
Product Details
30280001
Comments (1)
Spare part
rating
satisfied
8 other products in the same category:
€0.82 (tax excl.)
€0.99 (tax incl.)
An instant female tube plug fitting is a connector used in pneumatic or low-pressure fluid systems that allows the end of a tube to be quickly and easily closed or locked using an instant connection system....
€10.53 (tax excl.)
€12.74 (tax incl.)
A 6-pipe male elbow instant fitting is designed to distribute or combine compressed air flow from a single threaded inlet to six flexible or semi-rigid tube lines. Applications: Pneumatic control panels, Robotics and...
€0.58 (tax excl.)
€0.70 (tax incl.)
A threaded insert fitting is primarily used in pneumatic systems. It is designed to connect flexible or semi-rigid tubing to a threaded port on a component. Applications: Industrial automation, Robotics, Packaging...
€2.94 (tax excl.)
€3.56 (tax incl.)
An instant cross-tube splice fitting is a Connector used in pneumatic or low-pressure fluid systems that allows quick and easy connection and disconnection of four tubes of the same diameter, with a cross-shaped...
€2.18 (tax excl.)
€2.64 (tax incl.)
An instant fitting with a long tapered thread elbow joint is used to change the direction of a pipe line 90° immediately upon exiting a component, while also providing a connection further away from the body of that...
€1.51 (tax excl.)
€1.83 (tax incl.)
A quick-connect fitting with a cylindrical threaded elbow joint is a connection component used primarily in pneumatic and low-pressure fluid systems. It allows for the quick and easy connection of a flexible or...
€0.71 (tax excl.)
€0.86 (tax incl.)
An instant tube extension fitting is a type of quick connector used to join two tubes of different diameters quickly and easily. Technical specifications: Working pressure -0.99 / 10 bar. Temperature 0 /- 60ºC. Wide...
€2.94 (tax excl.)
€3.56 (tax incl.)
A Y-shaped push-in instant fitting is used in low-pressure pneumatic or fluid systems to quickly and easily join three tubes of the same diameter. Applications: Pneumatic systems, Low pressure fluid systems,...
Recently Viewed
€0.53 (tax incl.)
€0.44 (tax excl.)
A fitting plug is a pneumatic accessory designed to securely close and seal the outlet of a fitting or pneumatic line that uses a quick-connect fitting. Main features: Working pressure -0.99 / 10 bar. Temperature 0 /-...
€20.00 (tax excl.)
€24.20 (tax incl.)
An in-line suction filter housing is used to install a filter in the line to suction oil from a hydraulic system. The filter is placed inside the housing and secured with a filter element. Applications: industrial...
€9.93 (tax excl.)
€12.02 (tax incl.)
A tank support bracket firmly and stably holds and secures a compressed air tank. These brackets are essential in any installation using compressed air. They allow the tank to be fixed to the floor or wall. Technical...

Menu

Settings