Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
LEVER FOR MONOBLOC DISTRIBUTOR
LEVER FOR MONOBLOC DISTRIBUTOR
LEVER FOR MONOBLOC DISTRIBUTOR
LEVER FOR MONOBLOC DISTRIBUTOR

LEVER FOR MONOBLOC DISTRIBUTOR

The lever for a monobloc distributor is the mechanical control element that allows the operator to control the movement of the internal slide of a hydraulic valve.

Applications: agricultural machinery, cranes and trailers, cleaning machinery

Main features:

  • For 3/8" - 1/2" models. Length 160 mm. M-8 thread.
  • For 3/4" - 1" models. Length 205 mm. M-10 thread.
  • Supplied with lock nut
€2.90 (tax included)
€2.40 (tax excl.)
SIZE
  • 3/8"-1/2"
  • 3/4"-1"
Reference:
49400000
Description

Lever for monobloc distributor

The monobloc distributor lever is a manually operated element designed to control monobloc hydraulic distributor valves. It allows for precise control of fluid flow and direction within the system, facilitating the operation of actuators such as hydraulic cylinders or motors.

Recommendations

It is recommended to verify compatibility with the specific distributor model and ensure proper fastening to avoid looseness during use.

Main applications

These levers are standard in machinery that requires direct tactile control:

  • Agricultural machinery: Control of a tractor's arms or the tilt of a plow.
  • Cranes and trailers: Operation of stabilizers or loading ramps.
  • Cleaning machinery: Control of industrial sweepers or garbage compactors.
  • Industrial hydraulic systems
Product Details
49400000
Comments
12 other products in the same category:
BUTTON GRIP EE1B

€30.00 (tax excl.)
€36.30 (tax included)
1-button joystick-type handle to control 1 coil. 2-wire cable A single push button. M-10x150 threaded fixing.
SELECTOR VALVE

€14.67 (tax excl.)
€17.75 (tax included)
The selector valve is designed to automatically select the line with the highest pressure between two hydraulic inlets, blocking the other to prevent fluid backflow. Applications: industrial machinery, mobile...
Extended ball fitting

€2.80 (tax excl.)
€3.39 (tax included)
Extended ball fitting for mounting on double piloted check valves Technical sheet: Made of carbon steel. Working temperature -40 / 150ºC. Working pressure 250 bar. Possibility of choosing various lengths and diameters...
WIKA A-10 PRESSURE TRANSMITTER

€140.00 (tax excl.)
€169.40 (tax included)
The Wika A-10 pressure transmitter is a pressure sensor designed for general industrial applications requiring accurate, reliable, and continuous measurement. Applications: hydraulic systems, pneumatic systems, pumps,...
BIDIRECTIONAL KNOB FLOW REGULATOR

€21.00 (tax excl.)
€25.41 (tax included)
Flow regulator with BIDIRECTIONAL straight knob control allows regulation in both directions. Possibility of attaching a nut for paneling. Regulated scale. Maximum pressure 300 bar. Flow rate, from 60 to 300 l/min.
SCREW-TYPE HYDRAULIC FLOW REGULATOR

€3.61 (tax excl.)
€4.37 (tax included)
The screw hydraulic flow regulator is a valve designed to precisely control and adjust the flow of oil in hydraulic circuits by means of an adjusting screw. Applications: Industrial hydraulic systems, Agricultural...
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY CLOSED, DOUBLE CHECK

€85.00 (tax excl.)
€102.85 (tax included)
2-WAY HYDRAULIC SOLENOID VALVE, NORMALLY CLOSED, DOUBLE CHECK Maximum pressure 280 bar. Flow rate 3/8" 30 l/min Flow rate 1/2" 70 l/min Operating temperature -20/90ºC Aluminum body, NBR gaskets Alternating current...
XMLA300D2S11 Pressure Switch

€120.00 (tax excl.)
€145.20 (tax included)
XMLA300D2S11 Pressure Switch Maximum pressure 300 bar 1 scale limit NO/NC Switch IP-66 protection rating Temperature -25 / 70ºC 1/4" female thread Download technical data sheet
COMPENSATED HYDRAULIC FLOW REGULATOR

€38.40 (tax excl.)
€46.46 (tax included)
Compensated 2-way flow regulator. Two chokes in series are present in the valve. The first corresponds to the one that is adjustable using the knob; The second, controlled by the pressure prior to and following the...
SLIDING FLOW DIVIDER

€113.56 (tax excl.)
€137.41 (tax included)
Sliding flow divider A spool flow divider is a type of hydraulic valve used to split an oil flow into two or more equal flows. The valve has a spool that moves along an orifice, dividing the oil flow into two or more...
PRESSURE LIMITING VALVE

€37.95 (tax excl.)
€45.92 (tax included)
Pressure limiting valve An in-line pressure limiting valve is a safety component that is installed directly on the piping of a hydraulic system to limit the maximum allowable pressure in the circuit. When the fluid...
DOUBLE TUBE PILOTED NON-RETURN VALVE 12

€19.00 (tax excl.)
€22.99 (tax included)
Double pilot check valve for Ø12 tube Made of steel. Conical seat. Working pressure, between 300 and 350 bar. Max temperature 80ºC
Recently Viewed
LEVER FOR MONOBLOC DISTRIBUTOR

€2.90 (tax included)
€2.40 (tax excl.)
The lever for a monobloc distributor is the mechanical control element that allows the operator to control the movement of the internal slide of a hydraulic valve. Applications: agricultural machinery, cranes and...
CYLINDER GASKET KIT ISO 15552

€27.75 (tax excl.)
€33.58 (tax included)
An ISO 15552 cylinder seal kit is a set of sealing components specifically designed for pneumatic cylinders that comply with the ISO 15552 standard. These seals prevent compressed air leaks, keep out contaminants from...
GREASE HOSE

€7.80 (tax excl.)
€9.44 (tax included)
Grease hose A grease hose is a high-strength flexible conductor designed to carry lubricating grease under pressure from a pump or grease gun to a lubrication point on machinery or mechanical equipment. Applications:...
MINIATURE CENTRAL MALE TEA

€3.33 (tax excl.)
€4.03 (tax included)
A miniature center male tee is a small "T" shaped connector used in compact piping systems or small diameter conduits. It is used in tight spaces where a "T" connection and an additional threaded outlet are needed....
4 LIP QUAD RING GASKET

€0.12 (tax excl.)
€0.15 (tax included)
Quad Ring 4 Lip Gasket Quad-Rings are sealing gaskets made of elastomer. They have four support points that give them greater resistance to extrusion and pressure. This gasket also stands out for the flexibility of...
ENDLESS CLAMP W2

€0.38 (tax excl.)
€0.46 (tax included)
The W2 endless clamp is ideal for automotive and industrial applications. It is used to secure and seal hoses and pipes. Applications: Cooling and heating systems, Fuel and air systems in automobiles, Industrial and...

Menu

Please sign in first.

Sign in