PNEUMATIC/MANUAL GREASE PUMP
Manual / pneumatic Lubricationpump
Technical data
Pump outlet connection: M 10 x 1
Filling valve and vent valve Lubricationguns: M 10 x 1
Capacity: 400ml.
Grease gun filling options: 400 g, Lubricationcartridge, DIN 1284, Lubricationdispenser or bulk grease
Filling options lever Lubricationpump: 400 g, Lubricationcartridge, DIN 1284, loose grease
Transmission ratio: 50:1
Grease conduction to the head of the manual Lubricationpump: By mechanical operation through a spring
Grease supply piston diameter: 6mm
Grease piston drive: With "trigger" (squeeze-release-squeeze)
Volume / stroke: 0.8 cm³
Working pressure (bar): 6
Minimum pressure (pneumatic propulsion): 2 bar
Maximum air pressure (bar): 8
Air connection: Adapter with barb, 6 mm, for hose, DN 6 (20 132)
Piston diameter at Lubricationpressure (Lubricationpump): 8 mm
Grease piston drive: lever
Loading rod drive: via an L-shaped grip handle
Closing cover: Removable
Pump body thickness: 1.0
Color: Silver/blue
Specifications
* With 1 reinforced hose, M 10 x 1, 8 x 300 mm
* With 1 nozzles, 4 BA, M 10 x 1
Characteristics
* This device works Lubricationup to NLGI 2
* The shape of the plug seal with hermetic seat in case of Lubricationor cartridge loss
* High precision metal piston (no losses)
* Constant performance, even after 5,000 cycles
*Z410 Zinc Die Casting Manual Grease Pump Head
* Non-slip handle thanks to the relief of the pump body
* Loading rod with grab handle
* The removable lid with fixation (ratchet) for the loading rod allows bulk Lubricationto be compressed manually and in any position; with a spring. Another purpose is to adjust the plunger more easily in damaged cartridges.
* Minimum effort, thanks to the constructive characteristics (dimensions) of the lever
* Rapid ventilation through half a turn of the manual Lubricationpump body
* With an additional lever Lubricationpump head, to change operation.