Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
PROGRESSIVE DISTRIBUTOR
PROGRESSIVE DISTRIBUTOR
PROGRESSIVE DISTRIBUTOR
PROGRESSIVE DISTRIBUTOR

PROGRESSIVE DISTRIBUTOR

Progressive Lubricationnipple

The progressive systems are optimized for use in medium and small machinery, combining the greatest robustness with an unbeatable quality-price ratio for the construction industry, industrial presses, recycling, printing, wind turbines or applications with food fats.

A pumping unit supplies the lubricant to the distributors, which divide the flow tightly and progressively (one at a time, in series), between their different outlets.

Each distributor outlet can feed a lubrication point directly or a second secondary distributor, again proportionally dividing the flow received between the enabled outputs.

  • Working pressure 15-300 bar.
  • Temperature -30ºC / 100ºC
  • Material Zinc plated steel.
  • For oil minimum 15 cST, for Lubricationmaximum NLGI 2
  • Outlet thread M10x1

Check other outputs and configurations.

Buy online PROGRESSIVE DISTRIBUTOR at the best price

€304.92 (tax incl.)
€252.00 (tax excl.)
OUTPUT TYPE
Reference:
753511
Consult price for large quantities
Related products
Description

Product Details
753511
Reference OUTPUT TYPE Price Add to cart
753511 2 OUTPUTS
€252.00
753512 3 OUTPUTS
€254.10
753513 4 OUTPUTS
€255.60
753514 5 OUTPUTS
€257.10
753515 6 OUTPUTS
€260.20
753516 7 OUTPUTS
€312.30
753517 8 OUTPUTS
€321.40
753518 9 OUTPUTS
€344.40
753519 10 OUTPUTS
€382.70
12 other products in the same category:
SHORT ROUND GREASE BRUSH SAT 2041 SHORT ROUND GREASE BRUSH SAT 2041

€22.39 (tax incl.)
€18.50 (tax excl.)
Short Lubricationbrush Ø25 Bristle length 15 mm. Synthetic polyamide bristles. Inlet thread 1/4" female
HIGH PRESSURE THREADED PIPE ELBOW UNION HIGH PRESSURE THREADED PIPE ELBOW UNION

€2.42 (tax incl.)
€2.00 (tax excl.)
Made of nickel-plated brass UNI-12164-5 Available for Ø4 and 6 mm. Pipe tolerance +/- 0.05 mm. Maximum working pressure 150 bar. Temperature -20 / 70ºC. Suitable for centralized lubrication circuits and high pressure...
M-12 STRAIGHT OPEN CABLE M-12 STRAIGHT OPEN CABLE

€24.56 (tax incl.)
€20.30 (tax excl.)
Connection cable for Lubricus LUB-V , LUB-C , LUB-D M-12 x 1 thread, free end. 4-pole, A-coded. Possibility between 5 mt. and 10 mt. Polyurethane Cable. Resistant to oils and coolants. Protection IP-67, IP-68, IP-69K
DOUBLE OFFENDED CHAIN LUBRICATOR SPROCKET DOUBLE OFFENDED CHAIN LUBRICATOR SPROCKET

€143.39 (tax incl.)
€118.50 (tax excl.)
Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear plastic sprocket. Chain lubrication sprockets...
DOUBLE CHAIN LUBRICATOR SPROCKET DOUBLE CHAIN LUBRICATOR SPROCKET

€143.39 (tax incl.)
€118.50 (tax excl.)
Double chain lubricator sprocket. Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear plastic...
LAT-SZ-G STRAIGHT LUBRICATION SPROCKET LAT-SZ-G STRAIGHT LUBRICATION SPROCKET

€52.88 (tax incl.)
€43.70 (tax excl.)
Lubrication sprocket. Made of polyurethane foam (open cell) Temperature -30ºC / 150ºC Max surface speed 5 m/s. Density 240 kg/m³ Suitable for Lubricationand oil. To select the module, take measurement. With the...
SQUARE FOR GAT2800 OILER SQUARE FOR GAT2800 OILER

€17.67 (tax incl.)
€14.60 (tax excl.)
Support for single-point lubricators. Suitable for all models that have a 1/4 G-LUBE, SOLOLUBE, LUB-5 male outlet Made of stainless steel
LUBRICUS UNIVERSAL GREASE LUB-KA01 LUBRICUS UNIVERSAL GREASE LUB-KA01

€55.78 (tax incl.)
€46.10 (tax excl.)
Universal LUB-KA01 Li/Ca Lubricationcartridge based on mineral oil. For general lubrication. Pressure 70 bar Temperature -30º / 120ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15...
LEFT DIAGONAL LUBRICATION SPROCKET LAT-SZ-L LEFT DIAGONAL LUBRICATION SPROCKET LAT-SZ-L

€57.60 (tax incl.)
€47.60 (tax excl.)
Lubrication sprocket. Made of polyurethane foam (open cell) Temperature -30ºC / 150ºC Max surface speed 5 m/s. Density 240 kg/m³ Suitable for Lubricationand oil. To select the module, take the measurement as a...
FAT SPLITER FAT SPLITER

€73.69 (tax incl.)
€60.90 (tax excl.)
The spliters distribute a uniform amount of lubricant at the exhaust points and are suitable even for NLGI grade 2 greases and also oils. The amount of lubricant transported by the system will be divided between 2, 3...

Menu

Please sign in first.

Sign in