Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
SQUARE FOR GAT2800 OILER

SQUARE FOR GAT2800 OILER

Support for single-point lubricators.

  • Suitable for all models that have a 1/4 G-LUBE, SOLOLUBE, LUB-5 male outlet
  • Made of stainless steel

Buy online SQUARE FOR GAT2800 OILER at the best price

€17.67 (tax incl.)
€14.60 (tax excl.)
Reference:
75215
Consult price for large quantities
Description

Support for 1/4 single-point lubricators.

Product Details
75215
12 other products in the same category:
LUBRICUS FOOD GREASE LUB-KA10 LUBRICUS FOOD GREASE LUB-KA10

€64.86 (tax incl.)
€53.60 (tax excl.)
NSF H1 reg food Lubricationcartridge No. 138985 Al thickener. Mineral oil base. Pressure 70 bar Temperature -20º / 160ºC. Volume 400 cm³ For NLGI Class 1 oils and greases Minimum distribution volume 0.15 cm³ Volume...
M-12 STRAIGHT OPEN CABLE M-12 STRAIGHT OPEN CABLE

€24.56 (tax incl.)
€20.30 (tax excl.)
Connection cable for Lubricus LUB-V , LUB-C , LUB-D M-12 x 1 thread, free end. 4-pole, A-coded. Possibility between 5 mt. and 10 mt. Polyurethane Cable. Resistant to oils and coolants. Protection IP-67, IP-68, IP-69K
LUBRICUS UNIVERSAL GREASE LUB-KA01 LUBRICUS UNIVERSAL GREASE LUB-KA01

€55.78 (tax incl.)
€46.10 (tax excl.)
Universal LUB-KA01 Li/Ca Lubricationcartridge based on mineral oil. For general lubrication. Pressure 70 bar Temperature -30º / 120ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15...
STRAIGHT SINGLE CHAIN LUBRICATOR SPROCKET STRAIGHT SINGLE CHAIN LUBRICATOR SPROCKET

€104.42 (tax incl.)
€86.30 (tax excl.)
Straight single chain lubricator sprocket. Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear...
LUBRICUS UNIVERSAL OIL LUB-KA14 LUBRICUS UNIVERSAL OIL LUB-KA14

€61.83 (tax incl.)
€51.10 (tax excl.)
VG-68 viscosity oil cartridge MINERAL base oil. Pressure 70 bar Temperature -10º / 90ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5 cm³ CHECK THE...
FLAT BRUSH WITH SIDE THREAD FLAT BRUSH WITH SIDE THREAD

€27.10 (tax incl.)
€22.40 (tax excl.)
Flat Lubricationbrush, side entry. Synthetic bristles. For oil lubrication. Available in 3 sizes 40, 70 and 100 mm wide. Inlet thread 1/4" female
RIGHT DIAGONAL LUBRICATION SPROCKET LAT-SZ-R RIGHT DIAGONAL LUBRICATION SPROCKET LAT-SZ-R

€57.60 (tax incl.)
€47.60 (tax excl.)
With the Lubricus lubrication sprocket, an optimal tooth supply is guaranteed over long periods. The lubricant is supplied variably through the Lubricus lubrication system. The lubricant enters through the shaft and...
FLAT BRUSH WITH CENTRAL THREAD FLAT BRUSH WITH CENTRAL THREAD

€22.87 (tax incl.)
€18.90 (tax excl.)
Flat Lubricationbrush. Synthetic bristles. Aluminum body. For oil lubrication. Available in 4 sizes 25, 40, 70 and 100 mm. Inlet thread 1/4" female
LUBRICUS FOOD OIL LUB-KA70 LUBRICUS FOOD OIL LUB-KA70

€62.92 (tax incl.)
€52.00 (tax excl.)
LUB Ka70 Food Oil Cartridge for Lubricus Food oil cartridge NSF-H1 No 127130 Synthetic base oil. Pressure 70 bar Temperature -30º / 100ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume...
ROUND GREASE BRUSH SAT 2034 ROUND GREASE BRUSH SAT 2034

€20.09 (tax incl.)
€16.60 (tax excl.)
Ø25 Lubricationbrush Bristle length 45 mm. Synthetic polyamide bristles. Inlet thread 1/4" female

Menu

Please sign in first.

Sign in