Click for more products.
No produts were found.
Click for more products.
No produts were found.

LUBRICUS FOOD GREASE LUB-KA10

  • NSF H1 reg food Lubricationcartridge No. 138985
  • Al thickener. Mineral oil base.
  • Pressure 70 bar
  • Temperature -20º / 160ºC.
  • Volume 400 cm³
  • For NLGI Class 1 oils and greases
  • Minimum distribution volume 0.15 cm³
  • Volume per cycle 0.15 - 4.5 cm³
  • Connection for 6/4 tube Max. 5 mt.
  • Weight without lubricant 1120 gr
  • Dimensions 112 x 196 x 94 mm.
  • CHECK THE PRICE

Buy online LUBRICUS FOOD GREASE LUB-KA10 at the best price

€64.86 (tax incl.)
€53.60 (tax excl.)
Reference:
7515
Consult price for large quantities
Product Details
7515
12 other products in the same category:
€27.10 (tax incl.)
€22.40 (tax excl.)
Flat Lubricationbrush, side entry. Synthetic bristles. For oil lubrication. Available in 3 sizes 40, 70 and 100 mm wide. Inlet thread 1/4" female
€5.45 (tax incl.)
€4.50 (tax excl.)
High pressure Lubricationfitting with threaded non-return valve. Instant fitting for high pressure. Suitable for water, oil and grease. Incorporates non-return valve Maximum pressure 150 bar Temperature -30 / 150 ºC...
€73.69 (tax incl.)
€60.90 (tax excl.)
The spliters distribute a uniform amount of lubricant at the exhaust points and are suitable even for NLGI grade 2 greases and also oils. The amount of lubricant transported by the system will be divided between 2, 3...
€57.60 (tax incl.)
€47.60 (tax excl.)
With the Lubricus lubrication sprocket, an optimal tooth supply is guaranteed over long periods. The lubricant is supplied variably through the Lubricus lubrication system. The lubricant enters through the shaft and...
€62.92 (tax incl.)
€52.00 (tax excl.)
LUB Ka70 Food Oil Cartridge for Lubricus Food oil cartridge NSF-H1 No 127130 Synthetic base oil. Pressure 70 bar Temperature -30º / 100ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume...
€41.75 (tax incl.)
€34.50 (tax excl.)
Universal LUB-KA-S-01 Li/Ca Lubricationcartridge based on mineral oil. For general lubrication. Pressure 50 bar. For Lubricus-S For general lubrication Temperature -30º / 120ºC. Volume 250 cm³ Weight without lubricant...
€52.88 (tax incl.)
€43.70 (tax excl.)
Lubrication sprocket. Made of polyurethane foam (open cell) Temperature -30ºC / 150ºC Max surface speed 5 m/s. Density 240 kg/m³ Suitable for Lubricationand oil. To select the module, take measurement. With the...
€22.99 (tax incl.)
€19.00 (tax excl.)
Battery for LUBRICUS B automatic oiler Lithium battery. Work capacity for 36 months. 3 Volts (6.0 Ah)
€57.60 (tax incl.)
€47.60 (tax excl.)
Lubrication sprocket. Made of polyurethane foam (open cell) Temperature -30ºC / 150ºC Max surface speed 5 m/s. Density 240 kg/m³ Suitable for Lubricationand oil. To select the module, take the measurement as a...
€73.69 (tax incl.)
€60.90 (tax excl.)
The splitters distribute a uniform amount of lubricant to the exhaust points and are suitable for oil with a consistency greater than ISO VG-100. The amount of lubricant transported by the system will be divided...
€59.17 (tax incl.)
€48.90 (tax excl.)
Universal calcium complex Lubricationcartridge NLGI class 0. Pressure 70 bar Temperature -30º / 140ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5...
€73.08 (tax incl.)
€60.40 (tax excl.)
PAO based PHS high temperature Lubricationcartridge Pressure 70 bar Temperature -40º / 160ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5 cm³...

Menu