Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
FAT SPLITER
FAT SPLITER
FAT SPLITER
FAT SPLITER
FAT SPLITER
FAT SPLITER

FAT SPLITER

The spliters distribute a uniform amount of lubricant at the exhaust points and are suitable even for NLGI grade 2 greases and also oils. The amount of lubricant transported by the system will be divided between 2, 3 or 4 parts and then transported to the final lubrication point.

  • Made of aluminum.
  • Ø6 inlet and outlet fittings included.
  • Working temperature up to 70ºC

Buy online FAT SPLITER at the best price

€73.69 (tax incl.)
€60.90 (tax excl.)
OUTPUT TYPE
Reference:
7505101
Consult price for large quantities
Description

Product Details
7505101
Reference OUTPUT TYPE Price Add to cart
7505101 2 OUTPUTS
€60.90
7505102 3 OUTPUTS
€75.40
7505103 4 OUTPUTS
€100.50
12 other products in the same category:
LUBRICUS FOOD GREASE LUB-KA10 LUBRICUS FOOD GREASE LUB-KA10

€64.86 (tax incl.)
€53.60 (tax excl.)
NSF H1 reg food Lubricationcartridge No. 138985 Al thickener. Mineral oil base. Pressure 70 bar Temperature -20º / 160ºC. Volume 400 cm³ For NLGI Class 1 oils and greases Minimum distribution volume 0.15 cm³ Volume...
HIGH PRESSURE TUBE Ø6 HIGH PRESSURE TUBE Ø6

€5.45 (tax incl.)
€4.50 (tax excl.)
High pressure tube made of PA-12 Ø 6x4 Served unfilled. Green or black color. Working pressure 90 bar. Temperature -40ºC / 80ºC Price per meter.
LUBRICUS HIGH TEMPERATURE GREASE LUB-KA03 LUBRICUS HIGH TEMPERATURE GREASE LUB-KA03

€73.08 (tax incl.)
€60.40 (tax excl.)
PAO based PHS high temperature Lubricationcartridge Pressure 70 bar Temperature -40º / 160ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5 cm³...
OIL SPLITER OIL SPLITER

€73.69 (tax incl.)
€60.90 (tax excl.)
The splitters distribute a uniform amount of lubricant to the exhaust points and are suitable for oil with a consistency greater than ISO VG-100. The amount of lubricant transported by the system will be divided...
G-LUBE M DESICANT FILTER G-LUBE M DESICANT FILTER

€99.70 (tax incl.)
€82.40 (tax excl.)
Desiccant filters protect industrial equipment from contamination by moisture and contaminating particles. The fluid reservoirs of hydraulic and lubrication systems are always at risk of being contaminated by unwanted...
FLAT BRUSH WITH SIDE THREAD FLAT BRUSH WITH SIDE THREAD

€27.10 (tax incl.)
€22.40 (tax excl.)
Flat Lubricationbrush, side entry. Synthetic bristles. For oil lubrication. Available in 3 sizes 40, 70 and 100 mm wide. Inlet thread 1/4" female
STRAIGHT SINGLE CHAIN LUBRICATOR SPROCKET STRAIGHT SINGLE CHAIN LUBRICATOR SPROCKET

€104.42 (tax incl.)
€86.30 (tax excl.)
Straight single chain lubricator sprocket. Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear...
LUBRICUS UNIVERSAL OIL LUB-KA14 LUBRICUS UNIVERSAL OIL LUB-KA14

€61.83 (tax incl.)
€51.10 (tax excl.)
VG-68 viscosity oil cartridge MINERAL base oil. Pressure 70 bar Temperature -10º / 90ºC. Volume 400 cm³ For NLGI class 2 oils and greases Minimum distribution volume 0.15 cm³ Volume per cycle 0.15 - 4.5 cm³ CHECK THE...
LAT-SZ-G STRAIGHT LUBRICATION SPROCKET LAT-SZ-G STRAIGHT LUBRICATION SPROCKET

€52.88 (tax incl.)
€43.70 (tax excl.)
Lubrication sprocket. Made of polyurethane foam (open cell) Temperature -30ºC / 150ºC Max surface speed 5 m/s. Density 240 kg/m³ Suitable for Lubricationand oil. To select the module, take measurement. With the...
THREADED HIGH PRESSURE PIPE NON-RETURN VALVE THREADED HIGH PRESSURE PIPE NON-RETURN VALVE

€5.45 (tax incl.)
€4.50 (tax excl.)
High pressure Lubricationfitting with threaded non-return valve. Instant fitting for high pressure. Suitable for water, oil and grease. Incorporates non-return valve Maximum pressure 150 bar Temperature -30 / 150 ºC...
HIGH PRESSURE THREADED PIPE ELBOW UNION HIGH PRESSURE THREADED PIPE ELBOW UNION

€2.42 (tax incl.)
€2.00 (tax excl.)
Made of nickel-plated brass UNI-12164-5 Available for Ø4 and 6 mm. Pipe tolerance +/- 0.05 mm. Maximum working pressure 150 bar. Temperature -20 / 70ºC. Suitable for centralized lubrication circuits and high pressure...
DOUBLE CHAIN LUBRICATOR SPROCKET DOUBLE CHAIN LUBRICATOR SPROCKET

€143.39 (tax incl.)
€118.50 (tax excl.)
Double chain lubricator sprocket. Open cell PU foam rollers punctually transfer lubricant to the surface of the roller chain flanges. The mechanical driving force of the rollers is guaranteed by a low-wear plastic...

Menu

Please sign in first.

Sign in