Click for more products.
No products were found.
Click for more products.
No products were found.
0
Your shopping cart is empty.
DOUBLE NG-6 OVERCENTER (BALANCE) VALVE

NG-6 DOUBLE OVERCENTER VALVE

The NG-6 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions:

  • Controlled lowering of the load that is not dragged by its weight, since the valve does not allow any cavitation of the actuator.
  • Limitation of maximum pressure in the event of shocks caused by load, overloads or sudden maneuvers (load control with open-center distributor).
  • These valves block the oil outlet from the actuator until a pilot pressure is reached in the inlet line that is inversely proportional to the load the actuator must support. This prevents the load from running away, and the load descent speed corresponds to the flow rate controlled by the distributor.
  • In the event of zero pilot pressure, the pressure required to open the valve corresponds to its setting, functioning as a braking valve.
Read moreShow less
€113.74 (tax incl.)
€94.00 (tax excl.)
PRESSURE
  • 20 - 200 Bar
  • 35 - 350 bar
Reference:
495900
Description

NG-6 double overcenter valve

Read moreShow less
Product Details
495900
Comments (0)
You may also like
NG-6 MOTHERBOARD WITH SIDE EXIT | Buy online NG-6 MOTHERBOARD WITH SIDE EXIT | Buy online

€44.75 (tax excl.)
€54.15 (tax incl.)
The NG-6 side outlet base plate in hydraulic systems serves as a support and connection for one or more NG-6 solenoid valves. The fluid inlet and outlet of the solenoid valves is located laterally. Definition: Made of...
BASE PLATE NG-6 LOWER OUTLET | Buy online BASE PLATE NG-6 LOWER OUTLET | Buy online

€49.20 (tax excl.)
€59.53 (tax incl.)
The NG-6 bottom outlet base plate serves as a support and connection for one or more NG-6 solenoid valves. On this type of plate, the fluid inlet and outlet connections of the solenoid valves are located on the...
NG-6 4/3" H-Center Solenoid Valve | Buy Online at the Best Price. NG-6 4/3" H-Center Solenoid Valve | Buy Online at the Best Price.

€47.00 (tax excl.)
€56.87 (tax incl.)
An NG-6 4/3 center-h solenoid valve is used to precisely control the flow of pressurized oil. It is designed to operate in demanding industrial environments and withstand high pressures. It has four ports and three...
8 other products in the same category:
Modular Flow Control Valve NG-10 | Buy online at the best price Modular Flow Control Valve NG-10 | Buy online at the best price

€168.75 (tax excl.)
€204.19 (tax incl.)
A NG-10 modular relief valve is a hydraulic component designed to protect a circuit or section of a hydraulic system from excessive pressure by diverting unnecessary oil flow when the pressure exceeds a preset maximum...
NG-10 Modular Flow Regulator | Buy online at the best price NG-10 Modular Flow Regulator | Buy online at the best price

€225.00 (tax excl.)
€272.25 (tax incl.)
A NG-10 modular flow regulator is a hydraulic component designed to control the speed of actuators. Applications: Heavy machinery, Hydraulic presses, Automation systems, Plastic injection or casting machinery....
NG6 Parallel Cross Lever Valve with Spring. Buy at the best price. NG6 Parallel Cross Lever Valve with Spring. Buy at the best price.

€85.00 (tax excl.)
€102.85 (tax incl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
DEMUELLE NG6 CLOSED CENTER LEVER VALVE Buy at the best price DEMUELLE NG6 CLOSED CENTER LEVER VALVE Buy at the best price

€85.00 (tax excl.)
€102.85 (tax incl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR | Buy Online Disumtec ATOS DH 0901/2 PNEUMATIC PILOT DISTRIBUTOR | Buy Online Disumtec

€350.00 (tax excl.)
€423.50 (tax incl.)
An ATOS DH 0901/2 pneumatic pilot operated distributor is a hydraulic directional valve designed to control the flow of oil in hydraulic systems. Applications: industrial machinery, mobile equipment, automation...
NG6 Lever Valve, center ABT. Sustained. Buy at the best price. NG6 Lever Valve, center ABT. Sustained. Buy at the best price.

€85.00 (tax excl.)
€102.85 (tax incl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG6 P-T CENTER LEVER VALVE WITH SPRING. Buy at the best price. NG6 P-T CENTER LEVER VALVE WITH SPRING. Buy at the best price.

€85.00 (tax excl.)
€102.85 (tax incl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
NG6 4/3 Closed Center Lever Valve. Buy at the best price. NG6 4/3 Closed Center Lever Valve. Buy at the best price.

€85.00 (tax excl.)
€102.85 (tax incl.)
NG-6 LEVER VALVE NG-6 Modular Valve Maximum working pressure 315 bar. Flow rate 60 l/min. Temperature -30/80ºC. Download Technical Catalog
Recently Viewed
DOUBLE NG-6 OVERCENTER (BALANCE) VALVE DOUBLE NG-6 OVERCENTER (BALANCE) VALVE

€113.74 (tax incl.)
€94.00 (tax excl.)
The NG-6 double overcenter valve is used to control movement and lock the actuator in both directions, performing the following functions: Controlled lowering of the load that is not dragged by its weight, since the...

Menu

Settings

Please sign in first.

Sign in