Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
P FIRING PIN COIL
P FIRING PIN COIL
P FIRING PIN COIL
P FIRING PIN COIL

P FIRING PIN COIL

The P-coil is an electrical component found in hammer drills. It is responsible for generating the electric current that powers the drill motor. It is an important component of the hammer drill. If the coil is damaged, the drill will not operate properly.

Technical data sheet:

  • Coil for P series hammers
  • ATEX rating.
  • Available in various voltages.
€53.36 (tax included)
€44.10 (tax excl.)
POWER
  • 24VAC
  • 24V DC
  • 110V AC
  • 220VAC
Reference:
40120002
Description

P firing pin coil

Operation

The P-hammer coil is part of the drill's internal mechanism. When the hammer function is activated, electric current flows through the coil, generating a magnetic field. This magnetic field interacts with other components to produce a back and forth motion that strikes the drill bit.

Product Details
40120002
Comments
12 other products in the same category:
PS SINGLE IMPACT HAMMER

€367.50 (tax excl.)
€444.68 (tax included)
A single-impact PS hammer produces a high impact force through a single impact between the internal piston and the welded metal base on silo and hopper walls. This action is effective in moving dust that tends to...
ADJUSTABLE F PISTON VIBRATOR

€155.40 (tax excl.)
€188.03 (tax included)
The adjustable F piston vibrator is particularly suited to conveying, condensing and separating powdery material thanks to perfectly linear, high-amplitude vibrations. It achieves optimum results when emptying hoppers...
CONTINUOUS IMPACT VIBRATOR P

€199.53 (tax excl.)
€241.43 (tax included)
The P continuous impact vibrator is particularly robust and is used to dislodge material encrustations inside pipes or hoppers. In areas where noise prevention is not a priority, P type vibrators are the most...
PG AIR CANNON

€421.05 (tax excl.)
€509.47 (tax included)
The PG air cannon is designed to generate powerful jets of compressed air. These air jets are used for various tasks such as surface cleaning, product drying, dust removal and fluidization of bulk materials. Other...
K DAMPED PISTON VIBRATOR

€171.20 (tax excl.)
€207.15 (tax included)
In the damped K-piston vibrator the linear vibration is generated by the movement of an internal floating piston rather than by impact between surfaces, and this is why the vibrators are also called air-damped piston...
S BALL VIBRATOR

€81.90 (tax excl.)
€99.10 (tax included)
Ball vibrators S develop frequencies above 580 Hz (> 35,000 rpm ) and are used when powdery materials must be moved. Ball vibrators are installed on silos and hoppers to prevent the formation of bridges and rat holes...
VBS Fluidifier

€63.00 (tax excl.)
€76.23 (tax included)
A VBS fluidizer improves the flow of bulk materials, such as powders, grains, or small particles, within silos, hoppers, or pipelines. By combining ventilation with gentle vibrations, these units prevent bridging or...
ORIGINAL ROLLER VIBRATOR

€155.40 (tax excl.)
€188.03 (tax included)
The OR Roller Vibrator is characterized by the reduction or elimination of friction thanks to high frequency and high centrifugal forces. At the same time, the vibrators are completely insensitive to resonance....
VM FLUIDIFIER (mini)

€63.00 (tax excl.)
€76.23 (tax included)
The VM (mini) Fluidizer combines material venting at pressures up to 6 bar with gentle vibration of the tank or silo wall (see technical data sheet for size, placement, and quantity). Due to the manufacturing...
PJ COMBINED PERCUSSOR HAMMER WITH BURST

€700.35 (tax excl.)
€847.42 (tax included)
The PJ combination hammer blaster is effective with powders that tend to compact under pressure, as well as very fine, dry powders. This hammer blaster is the most effective solution against the formation of bridges...
Fluidization plate

€39.90 (tax excl.)
€48.28 (tax included)
The fluidization plate is placed in tanks and silos to prevent product sticking and bridging (rat holes) by vibrating the material with compressed air. Thanks to the semi-convex shape of the I100 fluidization plates,...
OT TURBINE VIBRATOR

€159.60 (tax excl.)
€193.12 (tax included)
The OT turbine vibrator is the quietest series and has a higher rotation speed thanks to the presence of bearings, developing centrifugal forces of up to 781 kg. The main advantage is that it generates very high...
Recently Viewed
P FIRING PIN COIL

€53.36 (tax included)
€44.10 (tax excl.)
The P-coil is an electrical component found in hammer drills. It is responsible for generating the electric current that powers the drill motor. It is an important component of the hammer drill. If the coil is...
COMPRESSED AIR BOILER

€37.86 (tax excl.)
€45.81 (tax included)
A compressed air tank is a pressure vessel designed to store compressed air. This compressed air is generated by a compressor and stored in the tank, serving as a reserve of pneumatic energy. Compressed air boilers...
ANTENNA ACTUATED VALVE

€32.00 (tax excl.)
€38.72 (tax included)
The antenna actuated valve is manually actuated by a lever or button, commonly known as an "antenna". It is available in 3/2-way, which consists of three ports, with one inlet and two outlets. When activated, they...

Menu

Please sign in first.

Sign in