Click for more products.
No produts were found.
Click for more products.
No produts were found.
0
Your shopping cart is empty.
PG AIR CANNON
PG AIR CANNON
PG AIR CANNON
PG AIR CANNON

PG AIR CANNON

The PG air cannon is designed to generate powerful jets of compressed air. These air jets are used for various tasks such as surface cleaning, product drying, dust removal and fluidization of bulk materials. Other uses of the air cannon are for the corners of polygonal hoppers with tiled discharge cones, where hammering or vibration are not applicable. They are also successfully used in cases where bridges are formed.

Technical data sheet:

  • Working pressure: 3-6 bar (44-87 PSI).
  • Air consumption per cycle: 0.3-4.8 Nl ( 0.01-0.2 cu ft).
  • Direct effect on the product.
  • Control box option to adjust pauses and operation intervals, by timer, min 30 sec.
  • 0 impact on the structure of the container or silo.

AIR CANNON OPERATION

€509.47 (tax included)
€421.05 (tax excl.)
SIZE
  • 40
  • 63
  • 80
Reference:
40090013
Description

PG air cannon

Operation

The PG hammer, with electro-pneumatic control (pneumatic, on request) sends almost instantaneously a quantity of high pressure air into the silo or hopper causing the typical effects of an explosion that causes rat holes or bridges to collapse.

Product Details
40090013
Comments
Related products
T-22 COIL CONNECTOR DIN-43650-B T-22 COIL CONNECTOR DIN-43650-B

€1.00 (tax excl.)
€1.21 (tax included)
A T-22 DIN-43650-B coil connector is an industrial electrical connector primarily designed to safely and reliably connect a power or control source to a coil of an electromechanical device. The T-22 designation refers...
P FIRING PIN COIL P FIRING PIN COIL

€44.10 (tax excl.)
€53.36 (tax included)
The P-coil is an electrical component found in hammer drills. It is responsible for generating the electric current that powers the drill motor. It is an important component of the hammer drill. If the coil is...
12 other products in the same category:
OT TURBINE VIBRATOR

€159.60 (tax excl.)
€193.12 (tax included)
The OT turbine vibrator is the quietest series and has a higher rotation speed thanks to the presence of bearings, developing centrifugal forces of up to 781 kg. The main advantage is that it generates very high...
K DAMPED PISTON VIBRATOR

€171.20 (tax excl.)
€207.15 (tax included)
In the damped K-piston vibrator the linear vibration is generated by the movement of an internal floating piston rather than by impact between surfaces, and this is why the vibrators are also called air-damped piston...
VBS Fluidifier

€63.00 (tax excl.)
€76.23 (tax included)
A VBS fluidizer improves the flow of bulk materials, such as powders, grains, or small particles, within silos, hoppers, or pipelines. By combining ventilation with gentle vibrations, these units prevent bridging or...
Fluidization plate

€39.90 (tax excl.)
€48.28 (tax included)
The fluidization plate is placed in tanks and silos to prevent product sticking and bridging (rat holes) by vibrating the material with compressed air. Thanks to the semi-convex shape of the I100 fluidization plates,...
CONTINUOUS IMPACT VIBRATOR P

€199.53 (tax excl.)
€241.43 (tax included)
The P continuous impact vibrator is particularly robust and is used to dislodge material encrustations inside pipes or hoppers. In areas where noise prevention is not a priority, P type vibrators are the most...
VM FLUIDIFIER (mini)

€63.00 (tax excl.)
€76.23 (tax included)
The VM (mini) Fluidizer combines material venting at pressures up to 6 bar with gentle vibration of the tank or silo wall (see technical data sheet for size, placement, and quantity). Due to the manufacturing...
S BALL VIBRATOR

€81.90 (tax excl.)
€99.10 (tax included)
Ball vibrators S develop frequencies above 580 Hz (> 35,000 rpm ) and are used when powdery materials must be moved. Ball vibrators are installed on silos and hoppers to prevent the formation of bridges and rat holes...
PS SINGLE IMPACT HAMMER

€367.50 (tax excl.)
€444.68 (tax included)
A single-impact PS hammer produces a high impact force through a single impact between the internal piston and the welded metal base on silo and hopper walls. This action is effective in moving dust that tends to...
PJ COMBINED PERCUSSOR HAMMER WITH BURST

€700.35 (tax excl.)
€847.42 (tax included)
The PJ combination hammer blaster is effective with powders that tend to compact under pressure, as well as very fine, dry powders. This hammer blaster is the most effective solution against the formation of bridges...
ADJUSTABLE F PISTON VIBRATOR

€155.40 (tax excl.)
€188.03 (tax included)
The adjustable F piston vibrator is particularly suited to conveying, condensing and separating powdery material thanks to perfectly linear, high-amplitude vibrations. It achieves optimum results when emptying hoppers...
P FIRING PIN COIL

€44.10 (tax excl.)
€53.36 (tax included)
The P-coil is an electrical component found in hammer drills. It is responsible for generating the electric current that powers the drill motor. It is an important component of the hammer drill. If the coil is...
ORIGINAL ROLLER VIBRATOR

€155.40 (tax excl.)
€188.03 (tax included)
The OR Roller Vibrator is characterized by the reduction or elimination of friction thanks to high frequency and high centrifugal forces. At the same time, the vibrators are completely insensitive to resonance....
Recently Viewed
PG AIR CANNON

€509.47 (tax included)
€421.05 (tax excl.)
The PG air cannon is designed to generate powerful jets of compressed air. These air jets are used for various tasks such as surface cleaning, product drying, dust removal and fluidization of bulk materials. Other...
CAMLOCK B STAINLESS STEEL

€5.54 (tax excl.)
€6.71 (tax included)
He camlock B stainless steel It is used for quick connection of tubes, hoses, or other components. It is part of a female camlock with pins and a male BSP thread on the other end. Applications: Chemical and...
PRESSURE SWITCH WITH KNOB

€67.00 (tax excl.)
€81.07 (tax included)
A pressure switch with a knob is a device that opens or closes an electrical circuit based on a preset pressure, adjusted by the knob. It activates automatically when the pressure reaches the preset value....
90° ANGLED GREASE FITTING H3

€80.50 (tax excl.)
€97.41 (tax included)
A 90° angled grease fitting H3 is installed on machines and equipment to allow the injection of lubricant (grease) under pressure at a specific lubrication point. The H3 head ensures universal compatibility with...
BANJO 90º BALL FOR BRAKE PIPE

€4.24 (tax excl.)
€5.13 (tax included)
A 90° banjo fitting for brake lines is a specific type of hydraulic fitting used in vehicle brake systems. Its function is to securely and leak-free connect a brake line or pipe to a brake system component at a 90°...
HAMMER NUT

€0.50 (tax excl.)
€0.60 (tax included)
The hammer nut is used to join pieces in grooves of aluminum profiles. It is characterized by its design with a U-shaped bridge that fits into the profile groove and by its slotted head that allows it to be fastened...

Menu

Please sign in first.

Sign in